diff --git a/Makefile b/Makefile
index a3d9df81a68a193ff596d679833320fc32767dd3..675d011c95d46974c844329ae5799c1419a4f303 100644
--- a/Makefile
+++ b/Makefile
@@ -1111,8 +1111,8 @@ u-boot.sha1: u-boot.bin
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
-ifdef CONFIG_TPL
-SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
+ifneq ($(CONFIG_SPL_PAYLOAD),)
+SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
else
SPL_PAYLOAD := u-boot.bin
endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
index a00b5bc9c3587fb70e864d393ce0b6ca187cd6fe..7dae9f03c3fe00b5766d0e267390e61b192b3cee 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
@@ -129,6 +129,16 @@ Example:
The "loadables" is not optional. It tells SPL which images to load into memory.
+Falcon mode with QSPI boot
+--------------------------
+To use falcon mode with QSPI boot, SPL needs to be enabled. Similar to SD or
+NAND boot, a RAM version full feature U-Boot is needed. Unlike SD or NAND boot,
+SPL with QSPI doesn't need to combine SPL image with RAM version image. Two
+separated images are used, u-boot-spl.pbl and u-boot.img. The former is SPL
+image with RCW and PBI commands to load the SPL payload into On-Chip RAM. The
+latter is RAM version U-Boot in FIT format (or legacy format if FIT is not
+used).
+
Other things to consider
-----------------------
Falcon boot skips a lot of initialization in U-Boot. If Linux expects the
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index bfd663942aa23140741ef8ceadc795bdd4045274..8028d5228f49711dfe2977b660c644fa145593a6 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -6,8 +6,6 @@
#include <common.h>
#include <fsl_immap.h>
#include <fsl_ifc.h>
-#include <ahci.h>
-#include <scsi.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#include <asm/io.h>
@@ -330,36 +328,6 @@ void fsl_lsch3_early_init_f(void)
#endif
}
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
- struct ccsr_ahci __iomem *ccsr_ahci;
-
-#ifdef CONFIG_SYS_SATA2
- ccsr_ahci = (void *)CONFIG_SYS_SATA2;
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-#endif
-
-#ifdef CONFIG_SYS_SATA1
- ccsr_ahci = (void *)CONFIG_SYS_SATA1;
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
- ahci_init((void __iomem *)CONFIG_SYS_SATA1);
- scsi_scan(false);
-#endif
-
- return 0;
-}
-#endif
-
/* Get VDD in the unit mV from voltage ID */
int get_core_volt_from_fuse(void)
{
@@ -400,25 +368,6 @@ int get_core_volt_from_fuse(void)
}
#elif defined(CONFIG_FSL_LSCH2)
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
- struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
-
- /* Disable SATA ECC */
- out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
- ahci_init((void __iomem *)CONFIG_SYS_SATA);
- scsi_scan(false);
-
- return 0;
-}
-#endif
static void erratum_a009929(void)
{
@@ -719,9 +668,6 @@ int qspi_ahb_init(void)
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
-#ifdef CONFIG_SCSI_AHCI_PLAT
- sata_init();
-#endif
#ifdef CONFIG_CHAIN_OF_TRUST
fsl_setenv_chain_of_trust();
#endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index dba4b406070194b6a2c363bc82269690dbc41b15..3e53084b215dfe8e0572877d89a878dccd229dad 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -11,6 +11,7 @@
#include <fsl_csu.h>
#include <asm/arch/fdt.h>
#include <asm/arch/ppa.h>
+#include <asm/arch/soc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -21,6 +22,9 @@ u32 spl_boot_device(void)
#endif
#ifdef CONFIG_SPL_NAND_SUPPORT
return BOOT_DEVICE_NAND;
+#endif
+#ifdef CONFIG_QSPI_BOOT
+ return BOOT_DEVICE_NOR;
#endif
return 0;
}
@@ -52,6 +56,7 @@ void spl_board_init(void)
void board_init_f(ulong dummy)
{
+ icache_enable();
/* Clear global data */
memset((void *)gd, 0, sizeof(gd_t));
board_early_init_f();
@@ -101,6 +106,9 @@ void board_init_f(ulong dummy)
gd->arch.tlb_addr = (gd->ram_top - gd->arch.tlb_size) & ~(0x10000 - 1);
gd->arch.tlb_allocated = gd->arch.tlb_addr;
#endif /* CONFIG_SPL_FSL_LS_PPA */
+#if defined(CONFIG_QSPI_AHB_INIT) && defined(CONFIG_QSPI_BOOT)
+ qspi_ahb_init();
+#endif
}
#ifdef CONFIG_SPL_OS_BOOT
diff --git a/arch/arm/dts/fsl-ls1012a-2g5rdb.dts b/arch/arm/dts/fsl-ls1012a-2g5rdb.dts
index db23cf87ed7f2ce3776386e9f032a9a09d2f4cb7..cdd4ce45aaf9bf15101cb8d27c49db26f90d6857 100644
--- a/arch/arm/dts/fsl-ls1012a-2g5rdb.dts
+++ b/arch/arm/dts/fsl-ls1012a-2g5rdb.dts
@@ -40,3 +40,7 @@
&duart0 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1012a-qds.dtsi b/arch/arm/dts/fsl-ls1012a-qds.dtsi
index d069b603abd3e7e5343e545a7a70ee4819879c03..661af0e49e637b51a722a2d78f8770545e48c65a 100644
--- a/arch/arm/dts/fsl-ls1012a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1012a-qds.dtsi
@@ -125,3 +125,7 @@
status = "okay";
phy_type = "ulpi";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1012a-rdb.dtsi b/arch/arm/dts/fsl-ls1012a-rdb.dtsi
index 201e5faead143302f682fa73b193d7813ae943b2..757e2eb3519193090f65b68e42724dec77f3eb0a 100644
--- a/arch/arm/dts/fsl-ls1012a-rdb.dtsi
+++ b/arch/arm/dts/fsl-ls1012a-rdb.dtsi
@@ -34,3 +34,7 @@
&duart0 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1012a.dtsi b/arch/arm/dts/fsl-ls1012a.dtsi
index be9907655061f43e8adcb3cf2274752909ad7914..f22cbf4b2a289e4bcf0bc0015cc17f1c5ee9327d 100644
--- a/arch/arm/dts/fsl-ls1012a.dtsi
+++ b/arch/arm/dts/fsl-ls1012a.dtsi
@@ -134,6 +134,14 @@
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
+ sata: sata@3200000 {
+ compatible = "fsl,ls1012a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>;
+ interrupts = <0 69 4>;
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
usb0: usb2@8600000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
reg = <0x0 0x8600000 0x0 0x1000>;
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 9a219a6a1d55ad5ff30f51e0ede51a7dc6a00161..61b6e4bf07ee5b0fb8ad73339fd46c442cb87e57 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -85,39 +85,7 @@ struct cpu_type {
#define SVR_DEV(svr) ((svr) >> 8)
#define IS_SVR_DEV(svr, dev) (((svr) >> 16) == (dev))
-/* ahci port register default value */
-#define AHCI_PORT_PHY_1_CFG 0xa003fffe
-#define AHCI_PORT_PHY2_CFG 0x28184d1f
-#define AHCI_PORT_PHY3_CFG 0x0e081509
-#define AHCI_PORT_TRANS_CFG 0x08000029
-#define AHCI_PORT_AXICC_CFG 0x3fffffff
-
#ifndef __ASSEMBLY__
-/* AHCI (sata) register map */
-struct ccsr_ahci {
- u32 res1[0xa4/4]; /* 0x0 - 0xa4 */
- u32 pcfg; /* port config */
- u32 ppcfg; /* port phy1 config */
- u32 pp2c; /* port phy2 config */
- u32 pp3c; /* port phy3 config */
- u32 pp4c; /* port phy4 config */
- u32 pp5c; /* port phy5 config */
- u32 axicc; /* AXI cache control */
- u32 paxic; /* port AXI config */
- u32 axipc; /* AXI PROT control */
- u32 ptc; /* port Trans Config */
- u32 pts; /* port Trans Status */
- u32 plc; /* port link config */
- u32 plc1; /* port link config1 */
- u32 plc2; /* port link config2 */
- u32 pls; /* port link status */
- u32 pls1; /* port link status1 */
- u32 pcmdc; /* port CMD config */
- u32 ppcs; /* port phy control status */
- u32 pberr; /* port 0/1 BIST error */
- u32 cmds; /* port 0/1 CMD status error */
-};
-
#ifdef CONFIG_FSL_LSCH3
void fsl_lsch3_early_init_f(void);
int get_core_volt_from_fuse(void);
@@ -130,6 +98,9 @@ int board_setup_core_volt(u32 vdd);
void init_pfe_scfg_dcfg_regs(void);
#endif
#endif
+#ifdef CONFIG_QSPI_AHB_INIT
+int qspi_ahb_init(void);
+#endif
void cpu_name(char *name);
#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
diff --git a/board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg b/board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..735d46c9f9b7f3299b83d5d12a8179ae1c797696
--- /dev/null
+++ b/board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg
@@ -0,0 +1,26 @@
+#QSPI clk
+0957015c 40100000
+#Configure Scratch register
+09570600 00000000
+09570604 10000000
+#Disable CCI barrier tranaction
+09570178 0000e010
+09180000 00000008
+#USB PHY frequency sel
+09570418 0000009e
+0957041c 0000009e
+09570420 0000009e
+#Serdes SATA
+09eb1300 80104e20
+09eb08dc 00502880
+#PEX gen3 link
+09570158 00000300
+89400890 01048000
+89500890 01048000
+89600890 01048000
+#Alt base register
+09570158 00001000
+#flush PBI data
+096100c0 000fffff
+#Change endianness
+09550000 000f400c
diff --git a/board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg b/board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..7b9be0ad3f8e4acf1259496135bd71bf3f7b724d
--- /dev/null
+++ b/board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# RCW
+0c150010 0e000000 00000000 00000000
+11335559 40005012 40025000 c1000000
+00000000 00000000 00000000 00238800
+20124000 00003101 00000096 00000001
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 683fe4458862b7494bd07caf51ce3b9015e9545a..46b18cf00b3fd40d54627cd42a5ccb71cbf69be9 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2017 NXP Semiconductors
* Copyright 2015 Freescale Semiconductor
+ * Copyright 2017 NXP
*/
#include <common.h>
#include <malloc.h>
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 99c9053ab8302353681834a17720808bb885d9cd..2af26a881af05a3cec061ccdb68e5ee4eb9fa237 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -553,6 +553,16 @@ config SYS_OS_BASE
endif # SPL_OS_BOOT
+config SPL_PAYLOAD
+ string "SPL payload"
+ default "tpl/u-boot-with-tpl.bin" if TPL
+ default "u-boot.bin"
+ help
+ Payload for SPL boot. For backward compability, default to
+ u-boot.bin, i.e. RAW image without any header. In case of
+ TPL, tpl/u-boot-with-tpl.bin. For new boards, suggest to
+ use u-boot.img.
+
config SPL_PCI_SUPPORT
bool "Support PCI drivers"
help
diff --git a/configs/ls1012a2g5rdb_qspi_defconfig b/configs/ls1012a2g5rdb_qspi_defconfig
index 37b63ffb4ca4db1c49e2ed1271701035eb6e0d10..3b0b42f37e89882828334154ee44768507d4b1cc 100644
--- a/configs/ls1012a2g5rdb_qspi_defconfig
+++ b/configs/ls1012a2g5rdb_qspi_defconfig
@@ -29,11 +29,12 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
-# CONFIG_BLK is not set
+CONFIG_BLK=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_FSL_PFE=y
CONFIG_DM_ETH=y
CONFIG_SYS_NS16550=y
@@ -44,3 +45,7 @@ CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_SCSI=y
+CONFIG_AHCI=y
diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig
index 2bc13beb2f4e41c271ebeff4d2489a45060b5ffc..b5f5d010ad56b5cfbe43b6c97cd9048fc11aa9e3 100644
--- a/configs/ls1012afrdm_qspi_defconfig
+++ b/configs/ls1012afrdm_qspi_defconfig
@@ -31,6 +31,7 @@ CONFIG_DM=y
# CONFIG_MMC is not set
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_FSL_PFE=y
CONFIG_DM_ETH=y
CONFIG_E1000=y
diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig
index 1f9b76ad345b1661aa8fb9d7f08bbd351fb1025c..09c301b2016bccdbdbd862496c27a02feacf27e2 100644
--- a/configs/ls1012aqds_qspi_defconfig
+++ b/configs/ls1012aqds_qspi_defconfig
@@ -34,11 +34,12 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_SCSI_AHCI=y
-# CONFIG_BLK is not set
+CONFIG_BLK=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_FSL_PFE=y
CONFIG_DM_ETH=y
CONFIG_E1000=y
@@ -56,3 +57,8 @@ CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SCSI=y
+CONFIG_AHCI=y
diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
index 7dcfaaed4a6daa20a4c84cc8f001f783081d11f2..c444127f17f6e17a29043c62d3bf249e67351a6e 100644
--- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
@@ -31,11 +31,12 @@ CONFIG_CMD_CACHE=y
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
-# CONFIG_BLK is not set
+CONFIG_BLK=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
@@ -53,3 +54,8 @@ CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SCSI=y
+CONFIG_AHCI=y
diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig
index 6a8485c1cda91bacc897f39e315335296002be72..ee9f606ed9bc41b844cc796177b17d58d4221adb 100644
--- a/configs/ls1012ardb_qspi_defconfig
+++ b/configs/ls1012ardb_qspi_defconfig
@@ -30,11 +30,12 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
-# CONFIG_BLK is not set
+CONFIG_BLK=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_FSL_PFE=y
CONFIG_DM_ETH=y
CONFIG_E1000=y
@@ -51,3 +52,8 @@ CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SCSI=y
+CONFIG_AHCI=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index 64b5bb69aa53108505aae6232a0eddbbcb56f0c9..09ff4c32f7b1523cc323334be31233abeef6704f 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -4,7 +4,6 @@ CONFIG_SYS_TEXT_BASE=0x82000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_FSL_LS_PPA=y
-CONFIG_SPL_FSL_LS_PPA=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index f89c5546d561e9d41830c68c30b3f40b3a94e220..b2c18854f0c45c83dc4449ccb78738d8a6423986 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -30,6 +30,7 @@ CONFIG_DM=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
index 2cee1338b8d1bb06d32a015f9cb3978ef6bbd2be..b0538c131c6511e19cfda539426908b492adbb5f 100644
--- a/configs/ls1046aqds_sdcard_ifc_defconfig
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -1,8 +1,12 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1046AQDS=y
CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
CONFIG_DISTRO_DEFAULTS=y
@@ -17,6 +21,10 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index e3b2fccc5519158cf620bb9e5bf2bcb59f712015..d067ba9a54a9e31ac06899d99efce99505a63056 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -1,8 +1,12 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1046AQDS=y
CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
CONFIG_DISTRO_DEFAULTS=y
@@ -17,6 +21,10 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
@@ -37,6 +45,7 @@ CONFIG_DM=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index 3dfc1647f683e84f57cac7f19524eba40a658ecc..9e4f2751e718c044f8e46dceeeec0771278c30f1 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -1,8 +1,12 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1046ARDB=y
CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
CONFIG_DISTRO_DEFAULTS=y
@@ -17,6 +21,10 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index 7405c87437f377aa775b2463c0ec63704ef0b822..139e1abfbedc7ed164b57b79b5108a08c61b596c 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_NETDEVICES=y
CONFIG_PHY_GIGE=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index feab749ab20fa91b4f5ddd040c30c38333ce2cd0..45bef3dc65ab473a2728c355a16a9880d930feea 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -27,6 +27,7 @@ CONFIG_DM=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_NETDEVICES=y
CONFIG_PHY_GIGE=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
new file mode 100644
index 0000000000000000000000000000000000000000..5a5ae3ae51c442f4850df71b339965f9ebee45f4
--- /dev/null
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -0,0 +1,65 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_NOR_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_OS_BASE=0x40980000
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_SPL=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SPL_ENV_IS_NOWHERE=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_PHYLIB=y
+CONFIG_NETDEVICES=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_SPL_GZIP=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 67467df3bac3b777f25cbb8cad748395eec7f5b4..5c1ab6eeb1c19967123cc83ee0f0259fef55307a 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -1,9 +1,13 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1046ARDB=y
CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SECURE_BOOT=y
CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
CONFIG_DISTRO_DEFAULTS=y
@@ -16,6 +20,10 @@ CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_CRYPTO_SUPPORT=y
CONFIG_SPL_HASH_SUPPORT=y
CONFIG_CMD_GPT=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index e8a0155fd234d40f7d66c90e91b5ae361fed6b69..e82d389309b0e0fc447785c8dfecb1f292b8c095 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -1,8 +1,12 @@
CONFIG_ARM=y
CONFIG_TARGET_LS1046ARDB=y
CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
CONFIG_DISTRO_DEFAULTS=y
@@ -16,6 +20,10 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
index 6c2ed9af3d5e326bd4dd1c0b690b12cd963f0395..c7611025e1c3ae9ef512fc33c11106fd8c9ef677 100644
--- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
@@ -32,6 +32,7 @@ CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig
index f066412393e9a254d33abf4e1f7a647d514b9bcc..a7bed8ce06b825cf7090a54ff5394a3f24e30bc0 100644
--- a/configs/ls1088aqds_qspi_defconfig
+++ b/configs/ls1088aqds_qspi_defconfig
@@ -32,6 +32,7 @@ CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig
index e4724c7a0d84864bb646c283dd34f89f37074b5e..f724bd3ad67a7cbadf9e0577bbbbd1a38b0554d5 100644
--- a/configs/ls1088aqds_sdcard_qspi_defconfig
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@@ -42,6 +42,7 @@ CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
index 3212704651d59bd99b1398fa86d7c1b0b7930c07..d0334a239fa4c29f4ae69dea55a6528cb8473f15 100644
--- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
@@ -32,6 +32,7 @@ CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig
index cb8a1075e30279cf8ad66a44506cd1ab94468784..d8069665403a4a30e4d01e8e0850055699c43b1e 100644
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_qspi_defconfig
@@ -32,6 +32,7 @@ CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
index 62db1c1e0dcbb7885dfcc1c98e53289b2386e6a1..59356095cd2c6656f71597f0aa6d4cd50e08167b 100644
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@@ -45,6 +45,7 @@ CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_SYS_NS16550=y
diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig
index 8ae3faee9501d4090ae9aa5cf8147349fda439b1..bf1c0a2d7b427704873bedcc33a97e06cb06deae 100644
--- a/configs/ls1088ardb_sdcard_qspi_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_defconfig
@@ -42,6 +42,7 @@ CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
index 24bcd573dc15c606c675cd64f33deae2632a6630..9a9c33a1736a057dda663c1c293a8088f2f744eb 100644
--- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
@@ -27,6 +27,9 @@ CONFIG_DM=y
CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_PHYLIB=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig
index 18a9634342cfafb0b2ca8084cc30b47c80456e23..1384768ddfbd1b441f43020248a89bec7dbf9528 100644
--- a/configs/ls2088ardb_qspi_defconfig
+++ b/configs/ls2088ardb_qspi_defconfig
@@ -31,6 +31,9 @@ CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_PHYLIB=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_NETDEVICES=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
diff --git a/drivers/ata/sata_ceva.c b/drivers/ata/sata_ceva.c
index a7d45e81cfdc8256054b3019c22132d3de362223..047cff7f83920caa76889e9667d3c08d2b325593 100644
--- a/drivers/ata/sata_ceva.c
+++ b/drivers/ata/sata_ceva.c
@@ -7,8 +7,6 @@
#include <dm.h>
#include <ahci.h>
#include <scsi.h>
-#include <asm/arch/hardware.h>
-
#include <asm/io.h>
/* Vendor Specific Register Offsets */
@@ -18,6 +16,7 @@
#define AHCI_VEND_PP3C 0xB0
#define AHCI_VEND_PP4C 0xB4
#define AHCI_VEND_PP5C 0xB8
+#define AHCI_VEND_AXICC 0xBc
#define AHCI_VEND_PAXIC 0xC0
#define AHCI_VEND_PTC 0xC8
@@ -72,45 +71,57 @@
#define DRV_NAME "ahci-ceva"
#define CEVA_FLAG_BROKEN_GEN2 1
+/* flag bit definition */
+#define FLAG_COHERENT 1
+
+/* register config value */
+#define CEVA_PHY1_CFG 0xa003fffe
+#define CEVA_PHY2_CFG 0x28184d1f
+#define CEVA_PHY3_CFG 0x0e081509
+#define CEVA_TRANS_CFG 0x08000029
+#define CEVA_AXICC_CFG 0x3fffffff
+
+/* ecc addr-val pair */
+#define ECC_DIS_ADDR_CH2 0x80000000
+#define ECC_DIS_VAL_CH2 0x20140520
+
+enum ceva_soc {
+ CEVA_1V84,
+ CEVA_LS1012A,
+};
+
struct ceva_sata_priv {
ulong base;
+ enum ceva_soc soc;
+ ulong flag;
};
-static int ceva_init_sata(ulong mmio)
+static int ceva_init_sata(struct ceva_sata_priv *priv)
{
+ ulong base = priv->base;
ulong tmp;
- int i;
-
- /*
- * AXI Data bus width to 64
- * Set Mem Addr Read, Write ID for data transfers
- * Transfer limit to 72 DWord
- */
- tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
- writel(tmp, mmio + AHCI_VEND_PAXIC);
-
- /* Set AHCI Enable */
- tmp = readl(mmio + HOST_CTL);
- tmp |= HOST_AHCI_EN;
- writel(tmp, mmio + HOST_CTL);
-
- for (i = 0; i < NR_PORTS; i++) {
- /* TPSS TPRS scalars, CISE and Port Addr */
- tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
- writel(tmp, mmio + AHCI_VEND_PCFG);
-
- /* Port Phy Cfg register enables */
- tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
- writel(tmp, mmio + AHCI_VEND_PPCFG);
- /* Rx Watermark setting */
+ switch (priv->soc) {
+ case CEVA_1V84:
+ tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
+ writel(tmp, base + AHCI_VEND_PAXIC);
+ tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | PCFG_PAD_VAL;
+ writel(tmp, base + AHCI_VEND_PCFG);
+ tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
+ writel(tmp, base + AHCI_VEND_PPCFG);
tmp = PTC_RX_WM_VAL | PTC_RSVD;
- writel(tmp, mmio + AHCI_VEND_PTC);
-
- /* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
- tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
- writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
+ writel(tmp, base + AHCI_VEND_PTC);
+ break;
+
+ case CEVA_LS1012A:
+ writel(ECC_DIS_ADDR_CH2, ECC_DIS_VAL_CH2);
+ writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG);
+ writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC);
+ if (priv->flag & FLAG_COHERENT)
+ writel(CEVA_AXICC_CFG, base + AHCI_VEND_AXICC);
+ break;
}
+
return 0;
}
@@ -125,13 +136,14 @@ static int sata_ceva_probe(struct udevice *dev)
{
struct ceva_sata_priv *priv = dev_get_priv(dev);
- ceva_init_sata(priv->base);
+ ceva_init_sata(priv);
return ahci_probe_scsi(dev, priv->base);
}
static const struct udevice_id sata_ceva_ids[] = {
- { .compatible = "ceva,ahci-1v84" },
+ { .compatible = "ceva,ahci-1v84", .data = CEVA_1V84 },
+ { .compatible = "fsl,ls1012a-ahci", .data = CEVA_LS1012A },
{ }
};
@@ -139,10 +151,15 @@ static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
{
struct ceva_sata_priv *priv = dev_get_priv(dev);
- priv->base = devfdt_get_addr(dev);
+ if (dev_read_bool(dev, "dma-coherent"))
+ priv->flag |= FLAG_COHERENT;
+
+ priv->base = dev_read_addr(dev);
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
+ priv->soc = dev_get_driver_data(dev);
+
return 0;
}
diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c
index 5f2acb1c9d96d1b138a5d0715b2ef7034754313e..7639a8b3dd81c4c613d599d57e5331233f829ce6 100644
--- a/drivers/ddr/fsl/options.c
+++ b/drivers/ddr/fsl/options.c
@@ -742,8 +742,7 @@ unsigned int populate_memctl_options(const common_timing_params_t *common_dimm,
unsigned int ctrl_num)
{
unsigned int i;
- char buffer[HWCONFIG_BUFFER_SIZE];
- char *buf = NULL;
+ char buf[HWCONFIG_BUFFER_SIZE];
#if defined(CONFIG_SYS_FSL_DDR3) || \
defined(CONFIG_SYS_FSL_DDR2) || \
defined(CONFIG_SYS_FSL_DDR4)
@@ -757,8 +756,8 @@ unsigned int populate_memctl_options(const common_timing_params_t *common_dimm,
* Extract hwconfig from environment since we have not properly setup
* the environment but need it for ddr config params
*/
- if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
- buf = buffer;
+ if (env_get_f("hwconfig", buf, sizeof(buf)) < 0)
+ buf[0] = '\0';
#if defined(CONFIG_SYS_FSL_DDR3) || \
defined(CONFIG_SYS_FSL_DDR2) || \
@@ -1398,15 +1397,14 @@ int fsl_use_spd(void)
int use_spd = 0;
#ifdef CONFIG_DDR_SPD
- char buffer[HWCONFIG_BUFFER_SIZE];
- char *buf = NULL;
+ char buf[HWCONFIG_BUFFER_SIZE];
/*
* Extract hwconfig from environment since we have not properly setup
* the environment but need it for ddr config params
*/
- if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
- buf = buffer;
+ if (env_get_f("hwconfig", buf, sizeof(buf)) < 0)
+ buf[0] = '\0';
/* if hwconfig is not enabled, or "sdram" is not defined, use spd */
if (hwconfig_sub_f("fsl_ddr", "sdram", buf)) {
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 723d18ee2381803a68c7ae0050b45df8ed3446da..9dd560edcb3ed53f516cdd932cbc4d5691f58a1e 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -17,7 +17,6 @@
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#else
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index b65477e3967b35a6be3401ccc62d1cabfad57917..d88c9678dd3434bd8411a140897c68c24504d0a3 100644
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -29,7 +29,6 @@
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index b04a72662c5841095073ca9d473ed067d1cfb620..27948ba3b64f38d78045c4a166faeb4a25c27b59 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -32,7 +32,6 @@
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index c8bec69542b3b7cb0f0cf073b66d3a6e240f66b0..4d097747a3a88f706b5cd9252e9960ecfc4d45c2 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -21,7 +21,6 @@
#endif
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index cf63e7117f91e548c81488480d36fc7a136fb270..68ce7aa7ad3108f092b447a6f428721b5bb56dcd 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -36,7 +36,6 @@
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index ba3aafe1e2d72410eb23919daa291a9523c61622..90043eed5ac3a8f2d16f67c979d928851789955e 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -30,7 +30,6 @@
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
index 9714e44699e98f2b2e77eb42b294a3227cc1a4dd..804d41bea99956ccdd78e124977c56f51f6f0ca9 100644
--- a/include/configs/T4240QDS.h
+++ b/include/configs/T4240QDS.h
@@ -21,7 +21,6 @@
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#else
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 5bc63d207b297eeeace3f43b874faeee051543e0..4abe55408018f0172792f900be7be1efc11b4174 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -21,7 +21,6 @@
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#else
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 73f23a63dd25021596f61ee4bb77b0fcac24c00c..656d10dffbf8f93e1c9f13978a400fa8f72a80d9 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -60,7 +60,6 @@
/* SD boot SPL */
#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x17000
@@ -90,7 +89,6 @@
/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SPL_PBL_PAD
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 65ce098f76dd4fc5c88c6c75f4701d1d73e54ced..cdb73f644a26b159549360bad75ed9c688d01bed 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -16,10 +16,12 @@
#define SPL_NO_USB
#define SPL_NO_SATA
#endif
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
+#if defined(CONFIG_SPL_BUILD) && \
+ (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
#define SPL_NO_MMC
#endif
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT))
+#if defined(CONFIG_SPL_BUILD) && \
+ !defined(CONFIG_SPL_FSL_LS_PPA)
#define SPL_NO_IFC
#endif
@@ -58,16 +60,6 @@
/* SD boot SPL */
#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-
-#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */
#define CONFIG_SPL_STACK 0x10020000
@@ -92,10 +84,24 @@
#endif /* ifdef CONFIG_SECURE_BOOT */
#endif
+#if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
+#define CONFIG_SPL_TARGET "spl/u-boot-spl.pbl"
+#define CONFIG_SPL_TEXT_BASE 0x10000000
+#define CONFIG_SPL_MAX_SIZE 0x1f000
+#define CONFIG_SPL_STACK 0x10020000
+#define CONFIG_SPL_PAD_TO 0x20000
+#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
+ CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+#define CONFIG_SYS_MONITOR_LEN 0x100000
+#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#endif
+
/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SPL_PBL_PAD
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 2d45bbcd4deabea2eb9466186c055e827eeb26ad..87d8cf537415e14a8c4994e1ed705fe49a6e2e45 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -31,17 +31,21 @@
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
#endif
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
-#endif
-
#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
#ifdef CONFIG_EMMC_BOOT
#define CONFIG_SYS_FSL_PBL_RCW \
board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
#else
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
#endif
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg
+#define CONFIG_SYS_FSL_PBL_PBI \
+ board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg
+#define CONFIG_SYS_UBOOT_BASE 0x40100000
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000
#endif
#ifndef SPL_NO_IFC
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 137a18121744d1fef9beafadef4b895d2508ab44..031c311a3c71772f01bec3f6683be277867e29a4 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -195,17 +195,17 @@ unsigned long long get_qixis_addr(void);
#if defined(CONFIG_QSPI_BOOT)
#define CONFIG_BOOTCOMMAND "sf probe 0:0;" \
- "sf read 0x80200000 0xd00000 0x100000;"\
- " fsl_mc apply dpl 0x80200000 &&" \
+ "sf read 0x80001000 0xd00000 0x100000;"\
+ " fsl_mc lazyapply dpl 0x80001000 &&" \
" sf read $kernel_load $kernel_start" \
" $kernel_size && bootm $kernel_load"
#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80200000 0x6800 0x800;"\
- " fsl_mc apply dpl 0x80200000 &&" \
+#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
+ " fsl_mc lazyapply dpl 0x80001000 &&" \
" mmc read $kernel_load $kernel_start" \
" $kernel_size && bootm $kernel_load"
#else /* NOR BOOT*/
-#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \
+#define CONFIG_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \
" cp.b $kernel_start $kernel_load" \
" $kernel_size && bootm $kernel_load"
#endif
@@ -224,7 +224,6 @@ unsigned long long get_qixis_addr(void);
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
#define CONFIG_SPL_MAX_SIZE 0x16000
#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0x1800a000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 4459994eb4365706624c3880fad9d50251edf992..36243f92c1d548640fd2aef9d2a86dc8857ae1d2 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -381,8 +381,8 @@
"installer=load mmc 0:2 $load_addr " \
"/flex_installer_arm64.itb; " \
"env exists mcinitcmd && run mcinitcmd && " \
- "mmc read 0x80200000 0x6800 0x800;" \
- "fsl_mc apply dpl 0x80200000;" \
+ "mmc read 0x80001000 0x6800 0x800;" \
+ "fsl_mc lazyapply dpl 0x80001000;" \
"bootm $load_addr#ls1088ardb\0" \
"qspi_bootcmd=echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
@@ -402,11 +402,11 @@
#if defined(CONFIG_QSPI_BOOT)
/* Try to boot an on-QSPI kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
- "sf read 0x80200000 0xd00000 0x100000;" \
+ "sf read 0x80001000 0xd00000 0x100000;" \
"env exists mcinitcmd && env exists secureboot " \
" && sf read 0x80780000 0x780000 0x100000 " \
"&& esbc_validate 0x80780000;env exists mcinitcmd " \
- "&& fsl_mc apply dpl 0x80200000;" \
+ "&& fsl_mc lazyapply dpl 0x80001000;" \
"run distro_bootcmd;run qspi_bootcmd;" \
"env exists secureboot && esbc_halt;"
@@ -414,11 +414,11 @@
#elif defined(CONFIG_SD_BOOT)
#define CONFIG_BOOTCOMMAND \
"env exists mcinitcmd && mmcinfo; " \
- "mmc read 0x80200000 0x6800 0x800; " \
+ "mmc read 0x80001000 0x6800 0x800; " \
"env exists mcinitcmd && env exists secureboot " \
- " && mmc read 0x80780000 0x3800 0x10 " \
+ " && mmc read 0x80780000 0x3C00 0x10 " \
"&& esbc_validate 0x80780000;env exists mcinitcmd " \
- "&& fsl_mc apply dpl 0x80200000;" \
+ "&& fsl_mc lazyapply dpl 0x80001000;" \
"run distro_bootcmd;run sd_bootcmd;" \
"env exists secureboot && esbc_halt;"
#endif
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index cc101fd01bd3a6ea8d7e1ca7bd27eb5bd7f51e28..5024f9732622b124bcb9de12be7f88894b9516bc 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -206,7 +206,6 @@ unsigned long long get_qixis_addr(void);
#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
#define CONFIG_SPL_MAX_SIZE 0x16000
#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_TEXT_BASE 0x1800a000
#ifdef CONFIG_NAND_BOOT
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 73a405f8d93f2f43e8e4996dde8922ab5c14b947..84c6b7b2abb85c9967f1f1bbef300f6255b4ff89 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -281,13 +281,9 @@ unsigned long get_board_sys_clk(void);
/* SPI */
#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
-#define CONFIG_SPI_FLASH
#ifdef CONFIG_FSL_DSPI
#define CONFIG_SPI_FLASH_STMICRO
#endif
-#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
-#endif
#define FSL_QSPI_FLASH_SIZE SZ_64M /* 64MB */
#define FSL_QSPI_FLASH_NUM 2
#endif