diff --git a/MAKEALL b/MAKEALL
index c026b05c1a0844ec2b632cd4490780bb08ec5536..6728d3f6e3b6fef9c3895f281daea8aa07d07373 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -486,6 +486,7 @@ LIST_ARM9=" \
davinci_dvevm \
davinci_schmoogie \
davinci_sonata \
+ pmdra \
"
#########################################################################
@@ -503,6 +504,9 @@ LIST_ARM11=" \
cp1136 \
omap2420h4 \
apollon \
+ imx31_litekit \
+ imx31_phycore \
+ mx31ads \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 890c0972fe29a0d3f008288ff030da535e3867f5..4c07c2e6919e124e19de744f9e324a33b256558e 100644
--- a/Makefile
+++ b/Makefile
@@ -2382,6 +2382,9 @@ davinci_schmoogie_config : unconfig
davinci_sonata_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
+pmdra_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs pmdra prodrive davinci
+
omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
@@ -2592,14 +2595,23 @@ zylonite_config :
## ARM1136 Systems
#########################################################################
omap2420h4_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
+ @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
apollon_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) $(@:_config=) arm arm1136 apollon
+ @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
+imx31_litekit_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
+
+imx31_phycore_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
+
+mx31ads_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31
+
#========================================================================
# i386
#========================================================================
diff --git a/board/imx31_litekit/Makefile b/board/imx31_litekit/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..aaaec69d6acc796be59469f47f4abe6e174ce0fe
--- /dev/null
+++ b/board/imx31_litekit/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := imx31_litekit.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#######################################################################
+##
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/imx31_litekit/config.mk b/board/imx31_litekit/config.mk
new file mode 100644
index 0000000000000000000000000000000000000000..d34dc02d96a681110a9ae6e7b753516ed6249dde
--- /dev/null
+++ b/board/imx31_litekit/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x87f00000
diff --git a/board/imx31_litekit/imx31_litekit.c b/board/imx31_litekit/imx31_litekit.c
new file mode 100644
index 0000000000000000000000000000000000000000..8c6e6f5a9e1c346a0248e9de4e48a6ee28d28899
--- /dev/null
+++ b/board/imx31_litekit/imx31_litekit.c
@@ -0,0 +1,65 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+int board_init(void)
+{
+ __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
+ __REG(CSCR_L(0)) = 0xa0330d01;
+ __REG(CSCR_A(0)) = 0x00220800;
+
+ __REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */
+ __REG(CSCR_L(4)) = 0x444a4541;
+ __REG(CSCR_A(4)) = 0x44443302;
+
+ /* setup pins for UART1 */
+ mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+ mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+ mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+ mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+
+ gd->bd->bi_arch_number = 447; /* board id for linux */
+ gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ printf("Board: i.MX31 Litekit\n");
+ return 0;
+}
diff --git a/board/imx31_litekit/lowlevel_init.S b/board/imx31_litekit/lowlevel_init.S
new file mode 100644
index 0000000000000000000000000000000000000000..74d60678fd8324107f6aad237a1424820dafdc67
--- /dev/null
+++ b/board/imx31_litekit/lowlevel_init.S
@@ -0,0 +1,103 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/mx31-regs.h>
+
+.macro REG reg, val
+ ldr r2, =\reg
+ ldr r3, =\val
+ str r3, [r2]
+.endm
+
+.macro REG8 reg, val
+ ldr r2, =\reg
+ ldr r3, =\val
+ strb r3, [r2]
+.endm
+
+.macro DELAY loops
+ ldr r2, =\loops
+1:
+ subs r2, r2, #1
+ nop
+ bcs 1b
+.endm
+
+.globl lowlevel_init
+lowlevel_init:
+
+ REG IPU_CONF, IPU_CONF_DI_EN
+ REG CCM_CCMR, 0x074B0BF5
+
+ DELAY 0x40000
+
+ REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
+ REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
+
+ REG CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \
+ PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | \
+ PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | \
+ PDR0_MCU_PODF(0)
+
+ REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | \
+ PLL_MFN(0x23)
+ REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
+
+ REG 0x43FAC26C, 0 /* SDCLK */
+ REG 0x43FAC270, 0 /* CAS */
+ REG 0x43FAC274, 0 /* RAS */
+ REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
+ REG 0x43FAC284, 0 /* DQM3 */
+ /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
+ REG 0x43FAC288, 0
+ REG 0x43FAC28C, 0
+ REG 0x43FAC290, 0
+ REG 0x43FAC294, 0
+ REG 0x43FAC298, 0
+ REG 0x43FAC29C, 0
+ REG 0x43FAC2A0, 0
+ REG 0x43FAC2A4, 0
+ REG 0x43FAC2A8, 0
+ REG 0x43FAC2AC, 0
+ REG 0x43FAC2B0, 0
+ REG 0x43FAC2B4, 0
+ REG 0x43FAC2B8, 0
+ REG 0x43FAC2BC, 0
+ REG 0x43FAC2C0, 0
+ REG 0x43FAC2C4, 0
+ REG 0x43FAC2C8, 0
+ REG 0x43FAC2CC, 0
+ REG 0x43FAC2D0, 0
+ REG 0x43FAC2D4, 0
+ REG 0x43FAC2D8, 0
+ REG 0x43FAC2DC, 0
+ REG 0xB8001010, 0x00000004
+ REG 0xB8001004, 0x006ac73a
+ REG 0xB8001000, 0x92100000
+ REG 0x80000f00, 0x12344321
+ REG 0xB8001000, 0xa2100000
+ REG 0x80000000, 0x12344321
+ REG 0x80000000, 0x12344321
+ REG 0xB8001000, 0xb2100000
+ REG8 0x80000033, 0xda
+ REG8 0x81000000, 0xff
diff --git a/board/imx31_litekit/u-boot.lds b/board/imx31_litekit/u-boot.lds
new file mode 100644
index 0000000000000000000000000000000000000000..1460adcdd802ba6c0cb965ca437b1242a2588e0e
--- /dev/null
+++ b/board/imx31_litekit/u-boot.lds
@@ -0,0 +1,59 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1136/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/imx31_phycore/Makefile b/board/imx31_phycore/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..de37ccaa89748b59e94646b9c6edb5924a3e1efc
--- /dev/null
+++ b/board/imx31_phycore/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := imx31_phycore.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/imx31_phycore/config.mk b/board/imx31_phycore/config.mk
new file mode 100644
index 0000000000000000000000000000000000000000..d34dc02d96a681110a9ae6e7b753516ed6249dde
--- /dev/null
+++ b/board/imx31_phycore/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x87f00000
diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c
new file mode 100644
index 0000000000000000000000000000000000000000..85fdc25308f07263f06eb4e00490d6ada7c43d9d
--- /dev/null
+++ b/board/imx31_phycore/imx31_phycore.c
@@ -0,0 +1,73 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+int board_init(void)
+{
+ __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
+ __REG(CSCR_L(0)) = 0x10000d03;
+ __REG(CSCR_A(0)) = 0x00720900;
+
+ __REG(CSCR_U(1)) = 0x0000df06; /* CS1: Network Controller */
+ __REG(CSCR_L(1)) = 0x444a4541;
+ __REG(CSCR_A(1)) = 0x44443302;
+
+ __REG(CSCR_U(4)) = 0x0000d843; /* CS4: SRAM */
+ __REG(CSCR_L(4)) = 0x22252521;
+ __REG(CSCR_A(4)) = 0x22220a00;
+
+ /* setup pins for UART1 */
+ mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+ mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+ mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+ mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+
+ /* setup pins for I2C2 (for EEPROM, RTC) */
+ mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
+ mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SCL);
+
+ gd->bd->bi_arch_number = 447; /* board id for linux */
+ gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ printf("Board: Phytec phyCore i.MX31\n");
+ return 0;
+}
diff --git a/board/imx31_phycore/lowlevel_init.S b/board/imx31_phycore/lowlevel_init.S
new file mode 100644
index 0000000000000000000000000000000000000000..b0a5389181eadc117dea524ff44e1af92594ee34
--- /dev/null
+++ b/board/imx31_phycore/lowlevel_init.S
@@ -0,0 +1,105 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/mx31-regs.h>
+
+.macro REG reg, val
+ ldr r2, =\reg
+ ldr r3, =\val
+ str r3, [r2]
+.endm
+
+.macro REG8 reg, val
+ ldr r2, =\reg
+ ldr r3, =\val
+ strb r3, [r2]
+.endm
+
+.macro DELAY loops
+ ldr r2, =\loops
+1:
+ subs r2, r2, #1
+ nop
+ bcs 1b
+.endm
+
+.globl lowlevel_init
+lowlevel_init:
+
+ REG IPU_CONF, IPU_CONF_DI_EN
+ REG CCM_CCMR, 0x074B0BF5
+
+ DELAY 0x40000
+
+ REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
+ REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
+
+ REG CCM_PDR0, PDR0_CSI_PODF(0xff1) | PDR0_PER_PODF(7) | \
+ PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | \
+ PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | \
+ PDR0_MCU_PODF(0)
+
+ REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0xe) | PLL_MFI(9) | PLL_MFN(0xd)
+
+ REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(0x43) | PLL_MFI(12) | PLL_MFN(1)
+
+ REG 0x43FAC26C, 0 /* SDCLK */
+ REG 0x43FAC270, 0 /* CAS */
+ REG 0x43FAC274, 0 /* RAS */
+ REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
+ REG 0x43FAC284, 0 /* DQM3 */
+ /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
+ REG 0x43FAC288, 0
+ REG 0x43FAC28C, 0
+ REG 0x43FAC290, 0
+ REG 0x43FAC294, 0
+ REG 0x43FAC298, 0
+ REG 0x43FAC29C, 0
+ REG 0x43FAC2A0, 0
+ REG 0x43FAC2A4, 0
+ REG 0x43FAC2A8, 0
+ REG 0x43FAC2AC, 0
+ REG 0x43FAC2B0, 0
+ REG 0x43FAC2B4, 0
+ REG 0x43FAC2B8, 0
+ REG 0x43FAC2BC, 0
+ REG 0x43FAC2C0, 0
+ REG 0x43FAC2C4, 0
+ REG 0x43FAC2C8, 0
+ REG 0x43FAC2CC, 0
+ REG 0x43FAC2D0, 0
+ REG 0x43FAC2D4, 0
+ REG 0x43FAC2D8, 0
+ REG 0x43FAC2DC, 0
+ REG 0xB8001010, 0x00000004
+ REG 0xB8001004, 0x006ac73a
+ REG 0xB8001000, 0x92100000
+ REG 0x80000f00, 0x12344321
+ REG 0xB8001000, 0xa2100000
+ REG 0x80000000, 0x12344321
+ REG 0x80000000, 0x12344321
+ REG 0xB8001000, 0xb2100000
+ REG8 0x80000033, 0xda
+ REG8 0x81000000, 0xff
+ REG 0xB8001000, 0x82226080
+ REG 0x80000000, 0xDEADBEEF
diff --git a/board/imx31_phycore/u-boot.lds b/board/imx31_phycore/u-boot.lds
new file mode 100644
index 0000000000000000000000000000000000000000..1460adcdd802ba6c0cb965ca437b1242a2588e0e
--- /dev/null
+++ b/board/imx31_phycore/u-boot.lds
@@ -0,0 +1,59 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1136/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/mx31ads/Makefile b/board/mx31ads/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..c854e0577d4f95f708ef4d38006107de19e5a520
--- /dev/null
+++ b/board/mx31ads/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000-2008
+# Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := mx31ads.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mx31ads/config.mk b/board/mx31ads/config.mk
new file mode 100644
index 0000000000000000000000000000000000000000..d34dc02d96a681110a9ae6e7b753516ed6249dde
--- /dev/null
+++ b/board/mx31ads/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x87f00000
diff --git a/board/mx31ads/lowlevel_init.S b/board/mx31ads/lowlevel_init.S
new file mode 100644
index 0000000000000000000000000000000000000000..bc05b43a32eebc4c2def5ebff94e41f72779d33f
--- /dev/null
+++ b/board/mx31ads/lowlevel_init.S
@@ -0,0 +1,288 @@
+/*
+ * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/mx31-regs.h>
+
+.macro REG reg, val
+ ldr r2, =\reg
+ ldr r3, =\val
+ str r3, [r2]
+.endm
+
+.macro REG8 reg, val
+ ldr r2, =\reg
+ ldr r3, =\val
+ strb r3, [r2]
+.endm
+
+.macro DELAY loops
+ ldr r2, =\loops
+1:
+ subs r2, r2, #1
+ nop
+ bcs 1b
+.endm
+
+/* RedBoot: AIPS setup - Only setup MPROTx registers.
+ * The PACR default values are good.*/
+.macro init_aips
+ /*
+ * Set all MPROTx to be non-bufferable, trusted for R/W,
+ * not forced to user-mode.
+ */
+ ldr r0, =0x43F00000
+ ldr r1, =0x77777777
+ str r1, [r0, #0x00]
+ str r1, [r0, #0x04]
+ ldr r0, =0x53F00000
+ str r1, [r0, #0x00]
+ str r1, [r0, #0x04]
+
+ /*
+ * Clear the on and off peripheral modules Supervisor Protect bit
+ * for SDMA to access them. Did not change the AIPS control registers
+ * (offset 0x20) access type
+ */
+ ldr r0, =0x43F00000
+ ldr r1, =0x0
+ str r1, [r0, #0x40]
+ str r1, [r0, #0x44]
+ str r1, [r0, #0x48]
+ str r1, [r0, #0x4C]
+ ldr r1, [r0, #0x50]
+ and r1, r1, #0x00FFFFFF
+ str r1, [r0, #0x50]
+
+ ldr r0, =0x53F00000
+ ldr r1, =0x0
+ str r1, [r0, #0x40]
+ str r1, [r0, #0x44]
+ str r1, [r0, #0x48]
+ str r1, [r0, #0x4C]
+ ldr r1, [r0, #0x50]
+ and r1, r1, #0x00FFFFFF
+ str r1, [r0, #0x50]
+.endm /* init_aips */
+
+/* RedBoot: MAX (Multi-Layer AHB Crossbar Switch) setup */
+.macro init_max
+ ldr r0, =0x43F04000
+ /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
+ ldr r1, =0x00302154
+ str r1, [r0, #0x000] /* for S0 */
+ str r1, [r0, #0x100] /* for S1 */
+ str r1, [r0, #0x200] /* for S2 */
+ str r1, [r0, #0x300] /* for S3 */
+ str r1, [r0, #0x400] /* for S4 */
+ /* SGPCR - always park on last master */
+ ldr r1, =0x10
+ str r1, [r0, #0x010] /* for S0 */
+ str r1, [r0, #0x110] /* for S1 */
+ str r1, [r0, #0x210] /* for S2 */
+ str r1, [r0, #0x310] /* for S3 */
+ str r1, [r0, #0x410] /* for S4 */
+ /* MGPCR - restore default values */
+ ldr r1, =0x0
+ str r1, [r0, #0x800] /* for M0 */
+ str r1, [r0, #0x900] /* for M1 */
+ str r1, [r0, #0xA00] /* for M2 */
+ str r1, [r0, #0xB00] /* for M3 */
+ str r1, [r0, #0xC00] /* for M4 */
+ str r1, [r0, #0xD00] /* for M5 */
+.endm /* init_max */
+
+/* RedBoot: M3IF setup */
+.macro init_m3if
+ /* Configure M3IF registers */
+ ldr r1, =0xB8003000
+ /*
+ * M3IF Control Register (M3IFCTL)
+ * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
+ * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
+ * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
+ * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
+ * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
+ * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
+ * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
+ * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
+ * ------------
+ * 0x00000040
+ */
+ ldr r0, =0x00000040
+ str r0, [r1] /* M3IF control reg */
+.endm /* init_m3if */
+
+/* RedBoot: To support 133MHz DDR */
+.macro init_drive_strength
+ /*
+ * Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits
+ * in SW_PAD_CTL registers
+ */
+
+ /* SDCLK */
+ ldr r1, =0x43FAC200
+ ldr r0, [r1, #0x6C]
+ bic r0, r0, #(1 << 12)
+ str r0, [r1, #0x6C]
+
+ /* CAS */
+ ldr r0, [r1, #0x70]
+ bic r0, r0, #(1 << 22)
+ str r0, [r1, #0x70]
+
+ /* RAS */
+ ldr r0, [r1, #0x74]
+ bic r0, r0, #(1 << 2)
+ str r0, [r1, #0x74]
+
+ /* CS2 (CSD0) */
+ ldr r0, [r1, #0x7C]
+ bic r0, r0, #(1 << 22)
+ str r0, [r1, #0x7C]
+
+ /* DQM3 */
+ ldr r0, [r1, #0x84]
+ bic r0, r0, #(1 << 22)
+ str r0, [r1, #0x84]
+
+ /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */
+ ldr r2, =22 /* (0x2E0 - 0x288) / 4 = 22 */
+pad_loop:
+ ldr r0, [r1, #0x88]
+ bic r0, r0, #(1 << 22)
+ bic r0, r0, #(1 << 12)
+ bic r0, r0, #(1 << 2)
+ str r0, [r1, #0x88]
+ add r1, r1, #4
+ subs r2, r2, #0x1
+ bne pad_loop
+.endm /* init_drive_strength */
+
+/* CPLD on CS4 setup */
+.macro init_cs4
+ ldr r0, =WEIM_BASE
+ ldr r1, =0x0000D843
+ str r1, [r0, #0x40]
+ ldr r1, =0x22252521
+ str r1, [r0, #0x44]
+ ldr r1, =0x22220A00
+ str r1, [r0, #0x48]
+.endm /* init_cs4 */
+
+.globl lowlevel_init
+lowlevel_init:
+
+ /* Redboot initializes very early AIPS, what for?
+ * Then it also initializes Multi-Layer AHB Crossbar Switch,
+ * M3IF */
+ /* Also setup the Peripheral Port Remap register inside the core */
+ ldr r0, =0x40000015 /* start from AIPS 2GB region */
+ mcr p15, 0, r0, c15, c2, 4
+
+ init_aips
+
+ init_max
+
+ init_m3if
+
+ init_drive_strength
+
+ init_cs4
+
+ /* Image Processing Unit: */
+ /* Too early to switch display on? */
+ /* Switch on Display Interface */
+ REG IPU_CONF, IPU_CONF_DI_EN
+ /* Clock Control Module: */
+ /* Use CKIH, MCU PLL off */
+ REG CCM_CCMR, 0x074B0BF5
+
+ DELAY 0x40000
+ /* MCU PLL on */
+ REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
+ /* Switch to MCU PLL */
+ REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
+
+ /* PBC CPLD on CS4 */
+ mov r1, #CS4_BASE
+ ldrh r1, [r1, #0x2]
+ /* Is 27MHz switch set? */
+ ands r1, r1, #0x16
+
+ /* 532-133-66.5 */
+ ldr r0, =CCM_BASE
+ ldr r1, =0xFF871D58
+ /* PDR0 */
+ str r1, [r0, #0x4]
+ ldreq r1, MPCTL_PARAM_532
+ ldrne r1, MPCTL_PARAM_532_27
+ /* MPCTL */
+ str r1, [r0, #0x10]
+
+ /* Set UPLL=240MHz, USB=60MHz */
+ ldr r1, =0x49FCFE7F
+ /* PDR1 */
+ str r1, [r0, #0x8]
+ ldreq r1, UPCTL_PARAM_240
+ ldrne r1, UPCTL_PARAM_240_27
+ /* UPCTL */
+ str r1, [r0, #0x14]
+ /* default CLKO to 1/8 of the ARM core */
+ mov r1, #0x000002C0
+ add r1, r1, #0x00000006
+ /* COSR */
+ str r1, [r0, #0x1c]
+
+ /* RedBoot sets 0x1ff, 7, 3, 5, 1, 3, 0 */
+/* REG CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \
+ PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | \
+ PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | \
+ PDR0_MCU_PODF(0)*/
+
+ /* Redboot: 0, 51, 10, 12 / 0, 14, 9, 13 */
+/* REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | \
+ PLL_MFN(0x23)*/
+ /* Default: 1, 4, 12, 1 */
+ REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
+
+ /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */
+ REG 0xB8001010, 0x00000004
+ REG 0xB8001004, 0x006ac73a
+ REG 0xB8001000, 0x92100000
+ REG 0x80000f00, 0x12344321
+ REG 0xB8001000, 0xa2100000
+ REG 0x80000000, 0x12344321
+ REG 0x80000000, 0x12344321
+ REG 0xB8001000, 0xb2100000
+ REG8 0x80000033, 0xda
+ REG8 0x81000000, 0xff
+ REG 0xB8001000, 0x82226080
+ REG 0x80000000, 0xDEADBEEF
+ REG 0xB8001010, 0x0000000c
+
+ mov pc, lr
+
+MPCTL_PARAM_532:
+ .word (((1-1) << 26) + ((52-1) << 16) + (10 << 10) + (12 << 0))
+MPCTL_PARAM_532_27:
+ .word (((1-1) << 26) + ((15-1) << 16) + (9 << 10) + (13 << 0))
+UPCTL_PARAM_240:
+ .word (((2-1) << 26) + ((13-1) << 16) + (9 << 10) + (3 << 0))
+UPCTL_PARAM_240_27:
+ .word (((2-1) << 26) + ((9 -1) << 16) + (8 << 10) + (8 << 0))
diff --git a/board/mx31ads/mx31ads.c b/board/mx31ads/mx31ads.c
new file mode 100644
index 0000000000000000000000000000000000000000..fe26b731833d93d2edbd05712a55fae680aebb5e
--- /dev/null
+++ b/board/mx31ads/mx31ads.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+int board_init(void)
+{
+ int i;
+#if 0
+ /* CS0: Nor Flash */
+ /*
+ * These are values from the RedBoot sources by Freescale. However,
+ * under U-Boot with this configuration 32-bit accesses don't work,
+ * lower 16 bits of data are read twice for each 32-bit read.
+ */
+ __REG(CSCR_U(0)) = 0x23524E80;
+ __REG(CSCR_L(0)) = 0x10000D03; /* WRAP bit (1) is suspicious here, but
+ * disabling it doesn't help either */
+ __REG(CSCR_A(0)) = 0x00720900;
+#endif
+
+ /* setup pins for UART1 */
+ mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+ mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+ mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+ mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+
+ /* PBC setup */
+ /* Enable UART transceivers also reset the Ethernet/external UART */
+ readw(CS4_BASE + 4);
+
+ writew(0x8023, CS4_BASE + 4);
+
+ /* RedBoot also has an empty loop with 100000 iterations here -
+ * clock doesn't run yet */
+ for (i = 0; i < 100000; i++)
+ ;
+
+ /* Clear the reset, toggle the LEDs */
+ writew(0xDF, CS4_BASE + 6);
+
+ /* clock still doesn't run */
+ for (i = 0; i < 100000; i++)
+ ;
+
+ /* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
+ readb(CS4_BASE + 8);
+ readb(CS4_BASE + 7);
+ readb(CS4_BASE + 8);
+ readb(CS4_BASE + 7);
+
+ gd->bd->bi_arch_number = 447; /* board id for linux */
+ gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ printf("Board: MX31ADS\n");
+ return 0;
+}
diff --git a/board/mx31ads/u-boot.lds b/board/mx31ads/u-boot.lds
new file mode 100644
index 0000000000000000000000000000000000000000..1460adcdd802ba6c0cb965ca437b1242a2588e0e
--- /dev/null
+++ b/board/mx31ads/u-boot.lds
@@ -0,0 +1,59 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1136/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/prodrive/pmdra/Makefile b/board/prodrive/pmdra/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..564e30e0a9b20bebafe58d4e6404fcc5a1a3a53a
--- /dev/null
+++ b/board/prodrive/pmdra/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := pmdra.o
+SOBJS := board_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak *~ .depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/prodrive/pmdra/board_init.S b/board/prodrive/pmdra/board_init.S
new file mode 100644
index 0000000000000000000000000000000000000000..3e4ef7c338a6df6670820a01f263518ef8185037
--- /dev/null
+++ b/board/prodrive/pmdra/board_init.S
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2008 Prodrive B.V.
+ *
+ * Board-specific low level initialization code. Called at the very end
+ * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * initialization required.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+.globl dv_board_init
+dv_board_init:
+
+ mov pc, lr
diff --git a/board/prodrive/pmdra/config.mk b/board/prodrive/pmdra/config.mk
new file mode 100644
index 0000000000000000000000000000000000000000..aa89d0ec8ae12bea17d271297589d242ab81c1d8
--- /dev/null
+++ b/board/prodrive/pmdra/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# (C) Copyright 2003
+# Texas Instruments, <www.ti.com>
+# Swaminathan <swami.iyer@ti.com>
+#
+# Davinci EVM board (ARM925EJS) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# Davinci EVM has 1 bank of 256 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 9000'0000
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# Visioneering Corp. Sonata board (ARM926EJS) cpu
+#
+# Sonata board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
+#
+# Schmoogie board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+#
+# we load ourself to 8108 '0000
+#
+#
+
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
diff --git a/board/prodrive/pmdra/pmdra.c b/board/prodrive/pmdra/pmdra.c
new file mode 100644
index 0000000000000000000000000000000000000000..42f7770e4402cddab1d8120165a9f5136b115d2b
--- /dev/null
+++ b/board/prodrive/pmdra/pmdra.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2008 Prodrive BV <pv@prodrive.nl>
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts are shamelessly stolen from various TI sources, original copyright
+ * follows:
+ * ---------------------------------------------------------------------------
+ *
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * ---------------------------------------------------------------------------
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ---------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+
+#define MACH_TYPE_DAVINCI_EVM 901
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void timer_init(void);
+extern int eth_hw_init(void);
+extern phy_t phy;
+
+/* Works on Always On power domain only (no PD argument) */
+void lpsc_on(unsigned int id)
+{
+ dv_reg_p mdstat, mdctl;
+
+ if (id >= DAVINCI_LPSC_GEM)
+ return; /* Don't work on DSP Power Domain */
+
+ mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
+ mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
+
+ while (REG(PSC_PTSTAT) & 0x01) {; }
+
+ if ((*mdstat & 0x1f) == 0x03)
+ return; /* Already on and enabled */
+
+ *mdctl |= 0x03;
+
+ /* Special treatment for some modules as for sprue14 p.7.4.2 */
+ if ((id == DAVINCI_LPSC_VPSSSLV) ||
+ (id == DAVINCI_LPSC_EMAC) ||
+ (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
+ (id == DAVINCI_LPSC_MDIO) ||
+ (id == DAVINCI_LPSC_USB) ||
+ (id == DAVINCI_LPSC_ATA) ||
+ (id == DAVINCI_LPSC_VLYNQ) ||
+ (id == DAVINCI_LPSC_UHPI) ||
+ (id == DAVINCI_LPSC_DDR_EMIF) ||
+ (id == DAVINCI_LPSC_AEMIF) ||
+ (id == DAVINCI_LPSC_MMC_SD) ||
+ (id == DAVINCI_LPSC_MEMSTICK) ||
+ (id == DAVINCI_LPSC_McBSP) ||
+ (id == DAVINCI_LPSC_GPIO))
+ *mdctl |= 0x200;
+
+ REG(PSC_PTCMD) = 0x01;
+
+ while (REG(PSC_PTSTAT) & 0x03) {; }
+ while ((*mdstat & 0x1f) != 0x03) {; } /* Probably an overkill... */
+}
+
+void dsp_on(void)
+{
+ int i;
+
+ if (REG(PSC_PDSTAT1) & 0x1f)
+ return; /* Already on */
+
+ REG(PSC_GBLCTL) |= 0x01;
+ REG(PSC_PDCTL1) |= 0x01;
+ REG(PSC_PDCTL1) &= ~0x100;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
+ REG(PSC_PTCMD) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (REG(PSC_EPCPR) & 0x02)
+ break;
+ }
+
+ REG(PSC_CHP_SHRTSW) = 0x01;
+ REG(PSC_PDCTL1) |= 0x100;
+ REG(PSC_EPCCR) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (!(REG(PSC_PTSTAT) & 0x02))
+ break;
+ }
+
+ REG(PSC_GBLCTL) &= ~0x1f;
+}
+
+
+int board_init(void)
+{
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ /* Workaround for TMS320DM6446 errata 1.3.22 */
+ REG(PSC_SILVER_BULLET) = 0;
+
+ /* Power on required peripherals */
+ lpsc_on(DAVINCI_LPSC_EMAC);
+ lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+ lpsc_on(DAVINCI_LPSC_MDIO);
+ lpsc_on(DAVINCI_LPSC_I2C);
+ lpsc_on(DAVINCI_LPSC_UART0);
+ lpsc_on(DAVINCI_LPSC_UART2);
+ lpsc_on(DAVINCI_LPSC_TIMER1);
+ lpsc_on(DAVINCI_LPSC_GPIO);
+
+ /* Powerup the DSP */
+ dsp_on();
+
+ /* Bringup UART0 and 2 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x00006001;
+ REG(UART2_PWREMU_MGMT) = 0x00006001;
+
+ /* Enable GIO3.3V cells used for EMAC */
+ REG(VDD3P3V_PWDN) = 0;
+
+ /* Enable UART0 and 2 MUX lines */
+ REG(PINMUX1) |= 1;
+ REG(PINMUX1) |= 4;
+
+ /* Enable EMAC and AEMIF pins */
+ REG(PINMUX0) = 0x80000c1f;
+
+ /* Enable I2C pin Mux */
+ REG(PINMUX1) |= (1 << 7);
+
+ /* Set the Bus Priority Register to appropriate value */
+ REG(VBPR) = 0x20;
+
+ timer_init();
+
+ return(0);
+}
+
+int misc_init_r(void)
+{
+ int clk = 0;
+
+ clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
+
+ printf("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27)/2);
+ printf("DDR Clock : %dMHz\n", (clk / 2));
+
+ if (!eth_hw_init())
+ printf("ethernet init failed!\n");
+ else
+ printf("ETH PHY : %s\n", phy.name);
+
+ return(0);
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return(0);
+}
diff --git a/board/prodrive/pmdra/u-boot.lds b/board/prodrive/pmdra/u-boot.lds
new file mode 100644
index 0000000000000000000000000000000000000000..710b2a2d6e60df7b2ed55352a92a537654f4863e
--- /dev/null
+++ b/board/prodrive/pmdra/u-boot.lds
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm926ejs/start.o (.text)
+ *(.text)
+ }
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+ . = ALIGN(4);
+ .data : { *(.data) }
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile
index d5ac7d3fd980e66e909bbe55dadaf3c3906c3737..7701b03bbeb736a530a9ad970be5cbe01904f599 100644
--- a/cpu/arm1136/Makefile
+++ b/cpu/arm1136/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS = interrupts.o cpu.o
+COBJS = cpu.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c
index fa78eaa7f06816373982b6577ef935a306a28e4e..90e955303b393a162d45e1a5efb389e3e9b7a50e 100644
--- a/cpu/arm1136/cpu.c
+++ b/cpu/arm1136/cpu.c
@@ -33,9 +33,6 @@
#include <common.h>
#include <command.h>
-#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
-#include <asm/arch/omap2420.h>
-#endif
#ifdef CONFIG_USE_IRQ
DECLARE_GLOBAL_DATA_PTR;
@@ -47,10 +44,10 @@ static unsigned long read_p15_c1 (void)
unsigned long value;
__asm__ __volatile__(
- "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
- : "=r" (value)
- :
- : "memory");
+ "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
+ : "=r" (value)
+ :
+ : "memory");
return value;
}
diff --git a/cpu/arm1136/mx31/Makefile b/cpu/arm1136/mx31/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..1fc8eea451b207477d623ddf2db5a833f9a6351c
--- /dev/null
+++ b/cpu/arm1136/mx31/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS = interrupts.o serial.o generic.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#######################################################################
+##
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/cpu/arm1136/mx31/generic.c b/cpu/arm1136/mx31/generic.c
new file mode 100644
index 0000000000000000000000000000000000000000..297d616d5e152d0644f77cca5b36c4c231d6e132
--- /dev/null
+++ b/cpu/arm1136/mx31/generic.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/mx31-regs.h>
+
+static u32 mx31_decode_pll(u32 reg, u32 infreq)
+{
+ u32 mfi = (reg >> 10) & 0xf;
+ u32 mfn = reg & 0x3f;
+ u32 mfd = (reg >> 16) & 0x3f;
+ u32 pd = (reg >> 26) & 0xf;
+
+ mfi = mfi <= 5 ? 5 : mfi;
+ mfd += 1;
+ pd += 1;
+
+ return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) /
+ (mfd * pd)) << 10;
+}
+
+u32 mx31_get_mpl_dpdgck_clk(void)
+{
+ u32 infreq;
+
+ if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
+ infreq = CONFIG_MX31_CLK32 * 1024;
+ else
+ infreq = CONFIG_MX31_HCLK_FREQ;
+
+ return mx31_decode_pll(__REG(CCM_MPCTL), infreq); }
+
+u32 mx31_get_mcu_main_clk(void)
+{
+ /* For now we assume mpl_dpdgck_clk == mcu_main_clk
+ * which should be correct for most boards
+ */
+ return mx31_get_mpl_dpdgck_clk();
+}
+
+u32 mx31_get_ipg_clk(void)
+{
+ u32 freq = mx31_get_mcu_main_clk();
+ u32 pdr0 = __REG(CCM_PDR0);
+
+ freq /= ((pdr0 >> 3) & 0x7) + 1;
+ freq /= ((pdr0 >> 6) & 0x3) + 1;
+
+ return freq;
+}
+
+void mx31_dump_clocks(void)
+{
+ u32 cpufreq = mx31_get_mcu_main_clk();
+ printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000);
+ printf("ipg clock : %dHz\n", mx31_get_ipg_clk());
+}
+
+void mx31_gpio_mux(unsigned long mode)
+{
+ unsigned long reg, shift, tmp;
+
+ reg = IOMUXC_BASE + (mode & 0xfc);
+ shift = (~mode & 0x3) * 8;
+
+ tmp = __REG(reg);
+ tmp &= ~(0xff << shift);
+ tmp |= ((mode >> 8) & 0xff) << shift;
+ __REG(reg) = tmp;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ printf("CPU: Freescale i.MX31 at %d MHz\n",
+ mx31_get_mcu_main_clk() / 1000000);
+ return 0;
+}
+#endif
diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c
new file mode 100644
index 0000000000000000000000000000000000000000..189f6017ab7135d740bec5109607eba72a8922ab
--- /dev/null
+++ b/cpu/arm1136/mx31/interrupts.c
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2007
+ * Sascha Hauer, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/mx31-regs.h>
+
+#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
+
+/* General purpose timers registers */
+#define GPTCR __REG(TIMER_BASE) /* Control register */
+#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */
+#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */
+#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
+
+/* General purpose timers bitfields */
+#define GPTCR_SWR (1<<15) /* Software reset */
+#define GPTCR_FRR (1<<9) /* Freerun / restart */
+#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */
+#define GPTCR_TEN (1) /* Timer enable */
+
+/*
+ * nothing really to do with interrupts, just starts up a counter.
+ */
+int interrupt_init(void)
+{
+ int i;
+
+ /* setup GP Timer 1 */
+ GPTCR = GPTCR_SWR;
+ for (i = 0; i < 100; i++) GPTCR = 0; /* We have no udelay by now */
+ GPTPR = 0; /* 32Khz */
+ /* Freerun Mode, PERCLK1 input */
+ GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
+
+ return 0;
+}
+
+void reset_timer_masked(void)
+{
+ GPTCR = 0;
+ /* Freerun Mode, PERCLK1 input*/
+ GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN;
+}
+
+ulong get_timer_masked(void)
+{
+ ulong val = GPTCNT;
+ return val;
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+void set_timer(ulong t)
+{
+}
+
+/* delay x useconds AND perserve advance timstamp value */
+void udelay(unsigned long usec)
+{
+ ulong tmo, tmp;
+
+ if (usec >= 1000) {
+ /* "big" number, spread normalization to seconds */
+ /* start to normalize for usec to ticks per sec */
+ tmo = usec / 1000;
+ /* find number of "ticks" to wait to achieve target */
+ tmo *= CFG_HZ;
+ tmo /= 1000; /* finish normalize. */
+ } else {
+ /* else small number, don't kill it prior to HZ multiply */
+ tmo = usec * CFG_HZ;
+ tmo /= (1000*1000);
+ }
+
+ tmp = get_timer(0); /* get current timestamp */
+ if ((tmo + tmp + 1) < tmp)
+ /* setting this forward will roll time stamp */
+ /* reset "advancing" timestamp to 0, set lastinc value */
+ reset_timer_masked();
+ else
+ /* else, set advancing stamp wake up time */
+ tmo += tmp;
+ while (get_timer_masked() < tmo)/* loop till event */
+ /*NOP*/;
+}
+
+void reset_cpu(ulong addr)
+{
+ __REG16(WDOG_BASE) = 4;
+}
diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c
new file mode 100644
index 0000000000000000000000000000000000000000..f7e1b3b1a906f1818b259ceddc3fe6ad7fa70553
--- /dev/null
+++ b/cpu/arm1136/mx31/serial.c
@@ -0,0 +1,230 @@
+/*
+ * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#if defined CONFIG_MX31_UART
+
+#include <asm/arch/mx31.h>
+
+#define __REG(x) (*((volatile u32 *)(x)))
+
+#ifdef CFG_MX31_UART1
+#define UART_PHYS 0x43f90000
+#elif defined(CFG_MX31_UART2)
+#define UART_PHYS 0x43f94000
+#elif defined(CFG_MX31_UART3)
+#define UART_PHYS 0x5000c000
+#elif defined(CFG_MX31_UART4)
+#define UART_PHYS 0x43fb0000
+#elif defined(CFG_MX31_UART5)
+#define UART_PHYS 0x43fb4000
+#else
+#error "define CFG_MX31_UARTx to use the mx31 UART driver"
+#endif
+
+/* Register definitions */
+#define URXD 0x0 /* Receiver Register */
+#define UTXD 0x40 /* Transmitter Register */
+#define UCR1 0x80 /* Control Register 1 */
+#define UCR2 0x84 /* Control Register 2 */
+#define UCR3 0x88 /* Control Register 3 */
+#define UCR4 0x8c /* Control Register 4 */
+#define UFCR 0x90 /* FIFO Control Register */
+#define USR1 0x94 /* Status Register 1 */
+#define USR2 0x98 /* Status Register 2 */
+#define UESC 0x9c /* Escape Character Register */
+#define UTIM 0xa0 /* Escape Timer Register */
+#define UBIR 0xa4 /* BRM Incremental Register */
+#define UBMR 0xa8 /* BRM Modulator Register */
+#define UBRC 0xac /* Baud Rate Count Register */
+#define UTS 0xb4 /* UART Test Register (mx31) */
+
+/* UART Control Register Bit Fields.*/
+#define URXD_CHARRDY (1<<15)
+#define URXD_ERR (1<<14)
+#define URXD_OVRRUN (1<<13)
+#define URXD_FRMERR (1<<12)
+#define URXD_BRK (1<<11)
+#define URXD_PRERR (1<<10)
+#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
+#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
+#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
+#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
+#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
+#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
+#define UCR1_IREN (1<<7) /* Infrared interface enable */
+#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
+#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
+#define UCR1_SNDBRK (1<<4) /* Send break */
+#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
+#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
+#define UCR1_DOZE (1<<1) /* Doze */
+#define UCR1_UARTEN (1<<0) /* UART enabled */
+#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
+#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
+#define UCR2_CTSC (1<<13) /* CTS pin control */
+#define UCR2_CTS (1<<12) /* Clear to send */
+#define UCR2_ESCEN (1<<11) /* Escape enable */
+#define UCR2_PREN (1<<8) /* Parity enable */
+#define UCR2_PROE (1<<7) /* Parity odd/even */
+#define UCR2_STPB (1<<6) /* Stop */
+#define UCR2_WS (1<<5) /* Word size */
+#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
+#define UCR2_TXEN (1<<2) /* Transmitter enabled */
+#define UCR2_RXEN (1<<1) /* Receiver enabled */
+#define UCR2_SRST (1<<0) /* SW reset */
+#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
+#define UCR3_PARERREN (1<<12) /* Parity enable */
+#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
+#define UCR3_DSR (1<<10) /* Data set ready */
+#define UCR3_DCD (1<<9) /* Data carrier detect */
+#define UCR3_RI (1<<8) /* Ring indicator */
+#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
+#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
+#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
+#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
+#define UCR3_BPEN (1<<0) /* Preset registers enable */
+#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
+#define UCR4_INVR (1<<9) /* Inverted infrared reception */
+#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
+#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
+#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
+#define UCR4_IRSC (1<<5) /* IR special case */
+#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
+#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
+#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
+#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
+#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
+#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
+#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
+#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
+#define USR1_RTSS (1<<14) /* RTS pin status */
+#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
+#define USR1_RTSD (1<<12) /* RTS delta */
+#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
+#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
+#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
+#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
+#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
+#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
+#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
+#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
+#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
+#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
+#define USR2_IDLE (1<<12) /* Idle condition */
+#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
+#define USR2_WAKE (1<<7) /* Wake */
+#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
+#define USR2_TXDC (1<<3) /* Transmitter complete */
+#define USR2_BRCD (1<<2) /* Break condition */
+#define USR2_ORE (1<<1) /* Overrun error */
+#define USR2_RDR (1<<0) /* Recv data ready */
+#define UTS_FRCPERR (1<<13) /* Force parity error */
+#define UTS_LOOP (1<<12) /* Loop tx and rx */
+#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
+#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
+#define UTS_TXFULL (1<<4) /* TxFIFO full */
+#define UTS_RXFULL (1<<3) /* RxFIFO full */
+#define UTS_SOFTRST (1<<0) /* Software reset */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void serial_setbrg(void)
+{
+ u32 clk = mx31_get_ipg_clk();
+
+ if (!gd->baudrate)
+ gd->baudrate = CONFIG_BAUDRATE;
+
+ __REG(UART_PHYS + UFCR) = 4 << 7; /* divide input clock by 2 */
+ __REG(UART_PHYS + UBIR) = 0xf;
+ __REG(UART_PHYS + UBMR) = clk / (2 * gd->baudrate);
+
+}
+
+int serial_getc(void)
+{
+ while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
+ return __REG(UART_PHYS + URXD);
+}
+
+void serial_putc(const char c)
+{
+ __REG(UART_PHYS + UTXD) = c;
+
+ /* wait for transmitter to be ready */
+ while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY));
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer */
+int serial_tstc(void)
+{
+ /* If receive fifo is empty, return false */
+ if (__REG(UART_PHYS + UTS) & UTS_RXEMPTY)
+ return 0;
+ return 1;
+}
+
+void serial_puts(const char *s)
+{
+ while (*s) {
+ serial_putc(*s++);
+ }
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init(void)
+{
+ __REG(UART_PHYS + UCR1) = 0x0;
+ __REG(UART_PHYS + UCR2) = 0x0;
+
+ while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST));
+
+ __REG(UART_PHYS + UCR3) = 0x0704;
+ __REG(UART_PHYS + UCR4) = 0x8000;
+ __REG(UART_PHYS + UESC) = 0x002b;
+ __REG(UART_PHYS + UTIM) = 0x0;
+
+ __REG(UART_PHYS + UTS) = 0x0;
+
+ serial_setbrg();
+
+ __REG(UART_PHYS + UCR2) = UCR2_WS | UCR2_IRTS | UCR2_RXEN | \
+ UCR2_TXEN | UCR2_SRST;
+
+ __REG(UART_PHYS + UCR1) = UCR1_UARTEN;
+
+ return 0;
+}
+
+
+#endif /* CONFIG_MX31 */
diff --git a/cpu/arm1136/omap24xx/Makefile b/cpu/arm1136/omap24xx/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..39b0a82811509ba4f67e26cc3b7ffd0a668add36
--- /dev/null
+++ b/cpu/arm1136/omap24xx/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS = interrupts.o
+SOBJS = start.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm1136/interrupts.c b/cpu/arm1136/omap24xx/interrupts.c
old mode 100644
new mode 100755
similarity index 50%
rename from cpu/arm1136/interrupts.c
rename to cpu/arm1136/omap24xx/interrupts.c
index 491c902ace3838224e85621ff92537878a5ea456..8503b24a8ea494d6ad5aea1fecb73704cea455b2
--- a/cpu/arm1136/interrupts.c
+++ b/cpu/arm1136/omap24xx/interrupts.c
@@ -32,31 +32,28 @@
#include <common.h>
#include <asm/arch/bits.h>
-
-#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
-# include <asm/arch/omap2420.h>
-#endif
+#include <asm/arch/omap2420.h>
#define TIMER_LOAD_VAL 0
/* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR))
-
-#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
-/* Use the IntegratorCP function from board/integratorcp.c */
-#else
+#define READ_TIMER (*((volatile ulong*)(CFG_TIMERBASE+TCRR)))
static ulong timestamp;
static ulong lastinc;
-/* nothing really to do with interrupts, just starts up a counter. */
-int interrupt_init (void)
+/*
+ * nothing really to do with interrupts, just starts up a counter.
+ */
+int interrupt_init(void)
{
int32_t val;
/* Start the counter ticking up */
- *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/
- val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/
+ /* reload value on overflow*/
+ *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;
+ /* mask to enable timer*/
+ val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0;
*((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */
reset_timer_masked(); /* init the timestamp and lastinc value */
@@ -66,82 +63,99 @@ int interrupt_init (void)
/*
* timer without interrupts
*/
-void reset_timer (void)
+void reset_timer(void)
{
- reset_timer_masked ();
+ reset_timer_masked();
}
-ulong get_timer (ulong base)
+ulong get_timer(ulong base)
{
- return get_timer_masked () - base;
+ return get_timer_masked() - base;
}
-void set_timer (ulong t)
+void set_timer(ulong t)
{
timestamp = t;
}
/* delay x useconds AND perserve advance timstamp value */
-void udelay (unsigned long usec)
+void udelay(unsigned long usec)
{
ulong tmo, tmp;
- if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
- tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
- tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
- tmo /= 1000; /* finish normalize. */
- } else { /* else small number, don't kill it prior to HZ multiply */
+ /* if "big" number, spread normalization to seconds */
+ if (usec >= 1000) {
+ /* start to normalize for usec to ticks per sec */
+ tmo = usec / 1000;
+ /* find number of "ticks" to wait to achieve target */
+ tmo *= CFG_HZ;
+ /* finish normalize. */
+ tmo /= 1000;
+ } else {
+ /* else small number, don't kill it prior to HZ multiply */
tmo = usec * CFG_HZ;
tmo /= (1000*1000);
}
-
- tmp = get_timer (0); /* get current timestamp */
- if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
- reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */
+ /* get current timestamp */
+ tmp = get_timer(0);
+ if ((tmo + tmp + 1) < tmp)
+ /* setting this forward will roll time stamp */
+ /* reset "advancing" timestamp to 0, set lastinc value */
+ reset_timer_masked();
else
- tmo += tmp; /* else, set advancing stamp wake up time */
- while (get_timer_masked () < tmo)/* loop till event */
+ /* else, set advancing stamp wake up time */
+ tmo += tmp;
+ while (get_timer_masked() < tmo)/* loop till event */
/*NOP*/;
}
-void reset_timer_masked (void)
+void reset_timer_masked(void)
{
/* reset time */
- lastinc = READ_TIMER; /* capture current incrementer value time */
- timestamp = 0; /* start "advancing" time stamp from 0 */
+ /* capture current incrementer value time */
+ lastinc = READ_TIMER;
+ /* start "advancing" time stamp from 0 */
+ timestamp = 0;
}
-ulong get_timer_masked (void)
+ulong get_timer_masked(void)
{
- ulong now = READ_TIMER; /* current tick value */
+ ulong now = READ_TIMER; /* current tick value */
- if (now >= lastinc) /* normal mode (non roll) */
- timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */
- else /* we have rollover of incrementer */
+ /* normal mode (non roll) */
+ if (now >= lastinc)
+ /* move stamp forward with absolute diff ticks */
+ timestamp += (now - lastinc);
+ else
+ /* we have rollover of incrementer */
timestamp += (0xFFFFFFFF - lastinc) + now;
lastinc = now;
return timestamp;
}
/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
+void udelay_masked(unsigned long usec)
{
ulong tmo;
ulong endtime;
signed long diff;
- if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
- tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
- tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
- tmo /= 1000; /* finish normalize. */
- } else { /* else small number, don't kill it prior to HZ multiply */
+ if (usec >= 1000) {
+ /* "big" number, spread normalization to seconds */
+ /* start to normalize for usec to ticks per sec */
+ tmo = usec / 1000;
+ /* find number of "ticks" to wait to achieve target */
+ tmo *= CFG_HZ;
+ tmo /= 1000;/* finish normalize. */
+ } else {
+ /* else small number, don't kill it prior to HZ multiply */
tmo = usec * CFG_HZ;
tmo /= (1000*1000);
}
- endtime = get_timer_masked () + tmo;
+ endtime = get_timer_masked() + tmo;
do {
- ulong now = get_timer_masked ();
+ ulong now = get_timer_masked();
diff = endtime - now;
} while (diff >= 0);
}
@@ -158,10 +172,9 @@ unsigned long long get_ticks(void)
* This function is derived from PowerPC code (timebase clock frequency).
* On ARM it returns the number of timer ticks per second.
*/
-ulong get_tbclk (void)
+ulong get_tbclk(void)
{
ulong tbclk;
tbclk = CFG_HZ;
return tbclk;
}
-#endif /* !Integrator/CP */
diff --git a/cpu/arm1136/omap24xx/start.S b/cpu/arm1136/omap24xx/start.S
new file mode 100644
index 0000000000000000000000000000000000000000..56343129701dc255aa01447c06c8d8cc1294d6f2
--- /dev/null
+++ b/cpu/arm1136/omap24xx/start.S
@@ -0,0 +1,42 @@
+/*
+ * armboot - Startup Code for OMP2420/ARM1136 CPU-core
+ *
+ * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com>
+ *
+ * Copyright (c) 2001 Marius Gr??ger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Z??pke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
+ * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/omap2420.h>
+
+.globl reset_cpu
+reset_cpu:
+ ldr r1, rstctl /* get addr for global reset reg */
+ mov r3, #0x2 /* full reset pll+mpu */
+ str r3, [r1] /* force reset */
+ mov r0, r0
+_loop_forever:
+ b _loop_forever
+rstctl:
+ .word PM_RSTCTRL_WKUP
diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S
index 8b765f1e806d0c5418214c924c9930941cb9bed6..56009d0fb339d7f43114c8a97bd1be2cf8705254 100644
--- a/cpu/arm1136/start.S
+++ b/cpu/arm1136/start.S
@@ -30,9 +30,6 @@
#include <config.h>
#include <version.h>
-#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
-#include <asm/arch/omap2420.h>
-#endif
.globl _start
_start: b reset
#ifdef CONFIG_ONENAND_IPL
@@ -438,22 +435,4 @@ fiq:
arm1136_cache_flush:
mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
mov pc, lr @ back to caller
-
-#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
-/* Use the IntegratorCP function from board/integratorcp/platform.S */
-#else
-
- .align 5
-.globl reset_cpu
-reset_cpu:
- ldr r1, rstctl /* get addr for global reset reg */
- mov r3, #0x2 /* full reset pll+mpu */
- str r3, [r1] /* force reset */
- mov r0, r0
-_loop_forever:
- b _loop_forever
-rstctl:
- .word PM_RSTCTRL_WKUP
-
-#endif
#endif /* CONFIG_ONENAND_IPL */
diff --git a/cpu/arm926ejs/davinci/lowlevel_init.S b/cpu/arm926ejs/davinci/lowlevel_init.S
index a87c112eca42e120a4a592430f6c54960baa2489..79bc692c143ccb663277e8742045b95517e4a84a 100644
--- a/cpu/arm926ejs/davinci/lowlevel_init.S
+++ b/cpu/arm926ejs/davinci/lowlevel_init.S
@@ -3,6 +3,11 @@
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
+ * Copyright (C) 2008 Prodrive BV <pv@prodrive.nl>
+ * Changed:
+ * Made board specific defines such as DDR timing and PLL
+ * dividers. These should be set in the board config file
+ *
* Partially based on TI sources, original copyrights follow:
*/
@@ -156,17 +161,17 @@ WaitPPL2Loop:
/* Program the PLL Multiplier */
ldr r6, PLL2_PLLM
- mov r2, $0x17 /* 162 MHz */
+ mov r2, $CFG_DAVINCI_PLL2_PLLM
str r2, [r6]
/* Program the PLL2 Divisor Value */
ldr r6, PLL2_DIV2
- mov r3, $0x01
+ mov r3, $CFG_DAVINCI_PLL2_DIV2
str r3, [r6]
/* Program the PLL2 Divisor Value */
ldr r6, PLL2_DIV1
- mov r4, $0x0b /* 54 MHz */
+ mov r4, $CFG_DAVINCI_PLL2_DIV1
str r4, [r6]
/* PLL2 DIV2 MMR */
@@ -273,7 +278,7 @@ checkDDRStatClkStop:
bne checkDDRStatClkStop
/*------------------------------------------------------*
- * Program DDR2 MMRs for 162MHz Setting *
+ * Program DDR2 MMRs *
*------------------------------------------------------*/
/* Program PHY Control Register */
@@ -288,12 +293,12 @@ checkDDRStatClkStop:
/* Program SDRAM TIM-0 Config Register */
ldr r6, SDTIM0
- ldr r7, SDTIM0_VAL_162MHz
+ ldr r7, SDTIM0_VAL
str r7, [r6]
/* Program SDRAM TIM-1 Config Register */
ldr r6, SDTIM1
- ldr r7, SDTIM1_VAL_162MHz
+ ldr r7, SDTIM1_VAL
str r7, [r6]
/* Program the SDRAM Bank Config Control Register */
@@ -435,7 +440,7 @@ WaitLoop:
/* Program the PLL Multiplier */
ldr r6, PLL1_PLLM
- mov r3, $0x15 /* For 594MHz */
+ mov r3, $CFG_DAVINCI_PLL1_PLLM
str r3, [r6]
/* Wait for PLL to Reset Properly */
@@ -467,7 +472,7 @@ PLL1Lock:
nop
/*------------------------------------------------------*
- * AEMIF configuration for NOR Flash (double check) *
+ * AEMIF configuration for NAND/NOR Flash *
*------------------------------------------------------*/
ldr r0, _PINMUX0
ldr r1, _DEV_SETTING
@@ -479,6 +484,12 @@ PLL1Lock:
orr r2, r2, r1
str r2, [r0]
+ ldr r0, ACFG2
+ ldr r1, ACFG2_VAL
+ ldr r2, [r0]
+ and r1, r2, r1
+ str r1, [r0]
+
ldr r0, ACFG3
ldr r1, ACFG3_VAL
ldr r2, [r0]
@@ -497,6 +508,12 @@ PLL1Lock:
and r1, r2, r1
str r1, [r0]
+ ldr r0, NANDFCR
+ ldr r1, NANDFCR_VAL
+ ldr r2, [r0]
+ and r1, r2, r1
+ str r1, [r0]
+
/*--------------------------------------*
* VTP manual Calibration *
*--------------------------------------*/
@@ -560,24 +577,36 @@ _PINMUX1:
.word 0x01c40004 /* Device Configuration Registers */
_DEV_SETTING:
- .word 0x00000c1f
+ .word CFG_DAVINCI_PINMUX_0
WAITCFG:
.word 0x01e00004
WAITCFG_VAL:
- .word 0
+ .word CFG_DAVINCI_WAITCFG
+ACFG2:
+ .word 0x01e00010
+ACFG2_VAL:
+ .word CFG_DAVINCI_ACFG2
ACFG3:
.word 0x01e00014
ACFG3_VAL:
- .word 0x3ffffffd
+ .word CFG_DAVINCI_ACFG3
ACFG4:
.word 0x01e00018
ACFG4_VAL:
- .word 0x3ffffffd
+ .word CFG_DAVINCI_ACFG4
ACFG5:
.word 0x01e0001c
ACFG5_VAL:
- .word 0x3ffffffd
+ .word CFG_DAVINCI_ACFG5
+NANDFCR:
+ .word 0x01e00060
+NANDFCR_VAL:
+#ifdef CFG_DAVINCI_NANDCE
+ .word (1 << (CFG_DAVINCI_NANDCE - 2))
+#else
+ .word 0x00000000
+#endif
MDCTL_DDR2:
.word 0x01c41a34
@@ -599,33 +628,27 @@ PSC_FLAG_CLEAR:
PSC_GEM_FLAG_CLEAR:
.word 0xfffffeff
-/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */
+/* DDR2 MMR & CONFIGURATION VALUES */
DDRCTL:
.word 0x200000e4
DDRCTL_VAL:
- .word 0x50006405
+ .word CFG_DAVINCI_DDRCTL
SDREF:
.word 0x2000000c
SDREF_VAL:
- .word 0x000005c3
+ .word CFG_DAVINCI_SDREF
SDCFG:
.word 0x20000008
SDCFG_VAL:
-#ifdef DDR_4BANKS
- .word 0x00178622
-#elif defined DDR_8BANKS
- .word 0x00178632
-#else
-#error "Unknown DDR configuration!!!"
-#endif
+ .word CFG_DAVINCI_SDCFG
SDTIM0:
.word 0x20000010
-SDTIM0_VAL_162MHz:
- .word 0x28923211
+SDTIM0_VAL:
+ .word CFG_DAVINCI_SDTIM0
SDTIM1:
.word 0x20000014
-SDTIM1_VAL_162MHz:
- .word 0x0016c722
+SDTIM1_VAL:
+ .word CFG_DAVINCI_SDTIM1
VTPIOCR:
.word 0x200000f0 /* VTP IO Control register */
DDRVTPR:
@@ -699,7 +722,7 @@ PLL2_DIV_MASK:
MMARG_BRF0:
.word 0x01c42010 /* BRF margin mode 0 (R/W)*/
MMARG_BRF0_VAL:
- .word 0x00444400
+ .word CFG_DAVINCI_MMARG_BRF0
DDR2_START_ADDR:
.word 0x80000000
diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c
index 127be9fcd4396d1b9918e467fc12258572adb96b..3257f83a2f9fafba9c5c7e347076a0c93570eced 100644
--- a/cpu/arm926ejs/davinci/nand.c
+++ b/cpu/arm926ejs/davinci/nand.c
@@ -117,7 +117,7 @@ static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
dummy = emif_addr->NANDF3ECC;
dummy = emif_addr->NANDF4ECC;
- emif_addr->NANDFCR |= (1 << 8);
+ emif_addr->NANDFCR |= (1 << (CFG_DAVINCI_NANDCE + 6));
}
static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
@@ -147,7 +147,7 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
- region = 1;
+ region = (CFG_DAVINCI_NANDCE - 1);
while (n--) {
tmp = nand_davinci_readecc(mtd, region);
*ecc_code++ = tmp;
@@ -311,40 +311,9 @@ static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, i
static void nand_flash_init(void)
{
- u_int32_t acfg1 = 0x3ffffffc;
- u_int32_t acfg2 = 0x3ffffffc;
- u_int32_t acfg3 = 0x3ffffffc;
- u_int32_t acfg4 = 0x3ffffffc;
- emifregs emif_regs;
-
- /*------------------------------------------------------------------*
- * NAND FLASH CHIP TIMEOUT @ 459 MHz *
- * *
- * AEMIF.CLK freq = PLL1/6 = 459/6 = 76.5 MHz *
- * AEMIF.CLK period = 1/76.5 MHz = 13.1 ns *
- * *
- *------------------------------------------------------------------*/
- acfg1 = 0
- | (0 << 31 ) /* selectStrobe */
- | (0 << 30 ) /* extWait */
- | (1 << 26 ) /* writeSetup 10 ns */
- | (3 << 20 ) /* writeStrobe 40 ns */
- | (1 << 17 ) /* writeHold 10 ns */
- | (1 << 13 ) /* readSetup 10 ns */
- | (5 << 7 ) /* readStrobe 60 ns */
- | (1 << 4 ) /* readHold 10 ns */
- | (3 << 2 ) /* turnAround ?? ns */
- | (0 << 0 ) /* asyncSize 8-bit bus */
- ;
-
- emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
-
- emif_regs->AWCCR |= 0x10000000;
- emif_regs->AB1CR = acfg1; /* 0x08244128 */;
- emif_regs->AB2CR = acfg2;
- emif_regs->AB3CR = acfg3;
- emif_regs->AB4CR = acfg4;
- emif_regs->NANDFCR = 0x00000101;
+ /* All EMIF initialization is done in lowlevel_init.S
+ * and config values are in the board config files
+ */
}
int board_nand_init(struct nand_chip *nand)
diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c
index 8bb8b45713a2dc078536bf7b899df78224d4fa2a..4797797b6dc9895e01ac3b66c311d548a3bf53f0 100644
--- a/cpu/arm926ejs/davinci/timer.c
+++ b/cpu/arm926ejs/davinci/timer.c
@@ -42,9 +42,9 @@
typedef volatile struct {
u_int32_t pid12;
- u_int32_t emumgt_clksped;
- u_int32_t gpint_en;
- u_int32_t gpdir_dat;
+ u_int32_t emumgt;
+ u_int32_t na1;
+ u_int32_t na2;
u_int32_t tim12;
u_int32_t tim34;
u_int32_t prd12;
@@ -52,21 +52,12 @@ typedef volatile struct {
u_int32_t tcr;
u_int32_t tgcr;
u_int32_t wdtcr;
- u_int32_t tlgc;
- u_int32_t tlmr;
} davinci_timer;
davinci_timer *timer = (davinci_timer *)CFG_TIMERBASE;
#define TIMER_LOAD_VAL (CFG_HZ_CLOCK / CFG_HZ)
-#define READ_TIMER timer->tim34
-
-/*
- * Timer runs with CFG_HZ_CLOCK, currently 27MHz. To avoid wrap
- * around of timestamp already after min ~159s, divide it, e.g. by 16.
- * timestamp will then wrap around all min ~42min
- */
-#define DIV(x) ((x) >> 4)
+#define TIM_CLK_DIV 16
static ulong timestamp;
static ulong lastinc;
@@ -76,63 +67,50 @@ int timer_init(void)
/* We are using timer34 in unchained 32-bit mode, full speed */
timer->tcr = 0x0;
timer->tgcr = 0x0;
- timer->tgcr = 0x06;
+ timer->tgcr = 0x06 | ((TIM_CLK_DIV - 1) << 8);
timer->tim34 = 0x0;
timer->prd34 = TIMER_LOAD_VAL;
lastinc = 0;
- timer->tcr = 0x80 << 16;
timestamp = 0;
+ timer->tcr = 2 << 22;
return(0);
}
void reset_timer(void)
{
- reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
- return(get_timer_masked() - base);
-}
-
-void set_timer(ulong t)
-{
- timestamp = t;
-}
-
-void udelay(unsigned long usec)
-{
- udelay_masked(usec);
-}
-
-void reset_timer_masked(void)
-{
- lastinc = DIV(READ_TIMER);
+ timer->tcr = 0x0;
+ timer->tim34 = 0;
+ lastinc = 0;
timestamp = 0;
+ timer->tcr = 2 << 22;
}
-ulong get_timer_raw(void)
+static ulong get_timer_raw(void)
{
- ulong now = DIV(READ_TIMER);
+ ulong now = timer->tim34;
if (now >= lastinc) {
/* normal mode */
timestamp += now - lastinc;
} else {
/* overflow ... */
- timestamp += now + DIV(TIMER_LOAD_VAL) - lastinc;
+ timestamp += now + TIMER_LOAD_VAL - lastinc;
}
lastinc = now;
return timestamp;
}
-ulong get_timer_masked(void)
+ulong get_timer(ulong base)
+{
+ return((get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base); }
+
+void set_timer(ulong t)
{
- return(get_timer_raw() / DIV(TIMER_LOAD_VAL));
+ timestamp = t;
}
-void udelay_masked(unsigned long usec)
+void udelay(unsigned long usec)
{
ulong tmo;
ulong endtime;
@@ -140,7 +118,7 @@ void udelay_masked(unsigned long usec)
tmo = CFG_HZ_CLOCK / 1000;
tmo *= usec;
- tmo /= 1000;
+ tmo /= (1000 * TIM_CLK_DIV);
endtime = get_timer_raw() + tmo;
@@ -165,8 +143,5 @@ unsigned long long get_ticks(void)
*/
ulong get_tbclk(void)
{
- ulong tbclk;
-
- tbclk = CFG_HZ;
- return(tbclk);
+ return CFG_HZ;
}
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 29d6c03dbb3e43bf36eb70eb83fd1cc37bae1432..071ef00b15e71d57cf711c7afab6a2f1951dd73c 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -29,6 +29,7 @@ COBJS-y += fsl_i2c.o
COBJS-y += omap1510_i2c.o
COBJS-y += omap24xx_i2c.o
COBJS-y += tsi108_i2c.o
+COBJS-y += mxc_i2c.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
new file mode 100644
index 0000000000000000000000000000000000000000..3c2a9cf180cfaf9b841437ae48ef4bd867f8bf18
--- /dev/null
+++ b/drivers/i2c/mxc_i2c.c
@@ -0,0 +1,207 @@
+/*
+ * i2c driver for Freescale mx31
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_HARD_I2C) && defined(CONFIG_I2C_MXC)
+
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+#define IADR 0x00
+#define IFDR 0x04
+#define I2CR 0x08
+#define I2SR 0x0c
+#define I2DR 0x10
+
+#define I2CR_IEN (1 << 7)
+#define I2CR_IIEN (1 << 6)
+#define I2CR_MSTA (1 << 5)
+#define I2CR_MTX (1 << 4)
+#define I2CR_TX_NO_AK (1 << 3)
+#define I2CR_RSTA (1 << 2)
+
+#define I2SR_ICF (1 << 7)
+#define I2SR_IBB (1 << 5)
+#define I2SR_IIF (1 << 1)
+#define I2SR_RX_NO_AK (1 << 0)
+
+#ifdef CFG_I2C_MX31_PORT1
+#define I2C_BASE 0x43f80000
+#elif defined(CFG_I2C_MX31_PORT2)
+#define I2C_BASE 0x43f98000
+#elif defined(CFG_I2C_MX31_PORT3)
+#define I2C_BASE 0x43f84000
+#else
+#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver"
+#endif
+
+#ifdef DEBUG
+#define DPRINTF(args...) printf(args)
+#else
+#define DPRINTF(args...)
+#endif
+
+static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
+ 160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
+ 1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
+
+void i2c_init(int speed, int unused)
+{
+ int freq = mx31_get_ipg_clk();
+ int i;
+
+ for (i = 0; i < 0x1f; i++)
+ if (freq / div[i] <= speed)
+ break;
+
+ DPRINTF("%s: speed: %d\n", __FUNCTION__, speed);
+
+ __REG16(I2C_BASE + I2CR) = 0; /* Reset module */
+ __REG16(I2C_BASE + IFDR) = i;
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN;
+ __REG16(I2C_BASE + I2SR) = 0;
+}
+
+static int wait_busy(void)
+{
+ int timeout = 10000;
+
+ while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout)
+ udelay(1);
+ __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
+
+ return timeout;
+}
+
+static int tx_byte(u8 byte)
+{
+ __REG16(I2C_BASE + I2DR) = byte;
+
+ if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK)
+ return -1;
+ return 0;
+}
+
+static int rx_byte(void)
+{
+ if (!wait_busy())
+ return -1;
+
+ return __REG16(I2C_BASE + I2DR);
+}
+
+int i2c_probe(uchar chip)
+{
+ int ret;
+
+ __REG16(I2C_BASE + I2CR) = 0; /* Reset module */
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN;
+
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX;
+ ret = tx_byte(chip << 1);
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX;
+
+ return ret;
+}
+
+static int i2c_addr(uchar chip, uint addr, int alen)
+{
+ __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX;
+
+ if (tx_byte(chip << 1))
+ return -1;
+
+ while (alen--)
+ if (tx_byte((addr >> (alen * 8)) & 0xff))
+ return -1;
+ return 0;
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ int timeout = 10000;
+ int ret;
+
+ DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: +%d\n", \
+ __FUNCTION__, chip, addr, alen, len);
+
+ if (i2c_addr(chip, addr, alen)) {
+ printf("i2c_addr failed\n");
+ return -1;
+ }
+
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | \
+ I2CR_MTX | I2CR_RSTA;
+
+ if (tx_byte(chip << 1 | 1))
+ return -1;
+
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | ((len == 1) \
+ ? I2CR_TX_NO_AK : 0);
+
+ ret = __REG16(I2C_BASE + I2DR);
+
+ while (len--) {
+ if ((ret = rx_byte()) < 0)
+ return -1;
+ *buf++ = ret;
+ if (len <= 1)
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN | \
+ I2CR_MSTA | I2CR_TX_NO_AK;
+ }
+
+ wait_busy();
+
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN;
+
+ while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
+ udelay(1);
+
+ return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ int timeout = 10000;
+ DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n", \
+ __FUNCTION__, chip, addr, alen, len);
+
+ if (i2c_addr(chip, addr, alen))
+ return -1;
+
+ while (len--)
+ if (tx_byte(*buf++))
+ return -1;
+
+ __REG16(I2C_BASE + I2CR) = I2CR_IEN;
+
+ while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
+ udelay(1);
+
+ return 0;
+}
+
+#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 320dc3ebac716adb4bfd9b699f9d19d6972f3710..948239885c26e61b28826b2bedf65b73e600f0a5 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -54,6 +54,7 @@ COBJS-y += rtl8139.o
COBJS-y += rtl8169.o
COBJS-y += s3c4510b_eth.o
COBJS-y += smc91111.o
+COBJS-y += smc911x.o
COBJS-y += tigon3.o
COBJS-y += tsec.o
COBJS-y += tsi108_eth.o
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
new file mode 100644
index 0000000000000000000000000000000000000000..2fd577779060a368c4da56045d06d599c4fba988
--- /dev/null
+++ b/drivers/net/smc911x.c
@@ -0,0 +1,680 @@
+/*
+ * SMSC LAN9[12]1[567] Network driver
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_SMC911X
+
+#include <command.h>
+#include <net.h>
+#include <miiphy.h>
+
+#define mdelay(n) udelay((n)*1000)
+
+#define __REG(x) (*((volatile u32 *)(x)))
+
+/* Below are the register offsets and bit definitions
+ * of the Lan911x memory space
+ */
+#define RX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00)
+
+#define TX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20)
+#define TX_CMD_A_INT_ON_COMP (0x80000000)
+#define TX_CMD_A_INT_BUF_END_ALGN (0x03000000)
+#define TX_CMD_A_INT_4_BYTE_ALGN (0x00000000)
+#define TX_CMD_A_INT_16_BYTE_ALGN (0x01000000)
+#define TX_CMD_A_INT_32_BYTE_ALGN (0x02000000)
+#define TX_CMD_A_INT_DATA_OFFSET (0x001F0000)
+#define TX_CMD_A_INT_FIRST_SEG (0x00002000)
+#define TX_CMD_A_INT_LAST_SEG (0x00001000)
+#define TX_CMD_A_BUF_SIZE (0x000007FF)
+#define TX_CMD_B_PKT_TAG (0xFFFF0000)
+#define TX_CMD_B_ADD_CRC_DISABLE (0x00002000)
+#define TX_CMD_B_DISABLE_PADDING (0x00001000)
+#define TX_CMD_B_PKT_BYTE_LENGTH (0x000007FF)
+
+#define RX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x40)
+#define RX_STS_PKT_LEN (0x3FFF0000)
+#define RX_STS_ES (0x00008000)
+#define RX_STS_BCST (0x00002000)
+#define RX_STS_LEN_ERR (0x00001000)
+#define RX_STS_RUNT_ERR (0x00000800)
+#define RX_STS_MCAST (0x00000400)
+#define RX_STS_TOO_LONG (0x00000080)
+#define RX_STS_COLL (0x00000040)
+#define RX_STS_ETH_TYPE (0x00000020)
+#define RX_STS_WDOG_TMT (0x00000010)
+#define RX_STS_MII_ERR (0x00000008)
+#define RX_STS_DRIBBLING (0x00000004)
+#define RX_STS_CRC_ERR (0x00000002)
+#define RX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x44)
+#define TX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x48)
+#define TX_STS_TAG (0xFFFF0000)
+#define TX_STS_ES (0x00008000)
+#define TX_STS_LOC (0x00000800)
+#define TX_STS_NO_CARR (0x00000400)
+#define TX_STS_LATE_COLL (0x00000200)
+#define TX_STS_MANY_COLL (0x00000100)
+#define TX_STS_COLL_CNT (0x00000078)
+#define TX_STS_MANY_DEFER (0x00000004)
+#define TX_STS_UNDERRUN (0x00000002)
+#define TX_STS_DEFERRED (0x00000001)
+#define TX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C)
+#define ID_REV __REG(CONFIG_DRIVER_SMC911X_BASE + 0x50)
+#define ID_REV_CHIP_ID (0xFFFF0000) /* RO */
+#define ID_REV_REV_ID (0x0000FFFF) /* RO */
+
+#define INT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x54)
+#define INT_CFG_INT_DEAS (0xFF000000) /* R/W */
+#define INT_CFG_INT_DEAS_CLR (0x00004000)
+#define INT_CFG_INT_DEAS_STS (0x00002000)
+#define INT_CFG_IRQ_INT (0x00001000) /* RO */
+#define INT_CFG_IRQ_EN (0x00000100) /* R/W */
+#define INT_CFG_IRQ_POL (0x00000010) /* R/W */
+ /* Not Affected by SW Reset */
+#define INT_CFG_IRQ_TYPE (0x00000001) /* R/W */
+ /* Not Affected by SW Reset */
+
+#define INT_STS __REG(CONFIG_DRIVER_SMC911X_BASE + 0x58)
+#define INT_STS_SW_INT (0x80000000) /* R/WC */
+#define INT_STS_TXSTOP_INT (0x02000000) /* R/WC */
+#define INT_STS_RXSTOP_INT (0x01000000) /* R/WC */
+#define INT_STS_RXDFH_INT (0x00800000) /* R/WC */
+#define INT_STS_RXDF_INT (0x00400000) /* R/WC */
+#define INT_STS_TX_IOC (0x00200000) /* R/WC */
+#define INT_STS_RXD_INT (0x00100000) /* R/WC */
+#define INT_STS_GPT_INT (0x00080000) /* R/WC */
+#define INT_STS_PHY_INT (0x00040000) /* RO */
+#define INT_STS_PME_INT (0x00020000) /* R/WC */
+#define INT_STS_TXSO (0x00010000) /* R/WC */
+#define INT_STS_RWT (0x00008000) /* R/WC */
+#define INT_STS_RXE (0x00004000) /* R/WC */
+#define INT_STS_TXE (0x00002000) /* R/WC */
+/*#define INT_STS_ERX (0x00001000)*/ /* R/WC */
+#define INT_STS_TDFU (0x00000800) /* R/WC */
+#define INT_STS_TDFO (0x00000400) /* R/WC */
+#define INT_STS_TDFA (0x00000200) /* R/WC */
+#define INT_STS_TSFF (0x00000100) /* R/WC */
+#define INT_STS_TSFL (0x00000080) /* R/WC */
+/*#define INT_STS_RXDF (0x00000040)*/ /* R/WC */
+#define INT_STS_RDFO (0x00000040) /* R/WC */
+#define INT_STS_RDFL (0x00000020) /* R/WC */
+#define INT_STS_RSFF (0x00000010) /* R/WC */
+#define INT_STS_RSFL (0x00000008) /* R/WC */
+#define INT_STS_GPIO2_INT (0x00000004) /* R/WC */
+#define INT_STS_GPIO1_INT (0x00000002) /* R/WC */
+#define INT_STS_GPIO0_INT (0x00000001) /* R/WC */
+#define INT_EN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C)
+#define INT_EN_SW_INT_EN (0x80000000) /* R/W */
+#define INT_EN_TXSTOP_INT_EN (0x02000000) /* R/W */
+#define INT_EN_RXSTOP_INT_EN (0x01000000) /* R/W */
+#define INT_EN_RXDFH_INT_EN (0x00800000) /* R/W */
+/*#define INT_EN_RXDF_INT_EN (0x00400000)*/ /* R/W */
+#define INT_EN_TIOC_INT_EN (0x00200000) /* R/W */
+#define INT_EN_RXD_INT_EN (0x00100000) /* R/W */
+#define INT_EN_GPT_INT_EN (0x00080000) /* R/W */
+#define INT_EN_PHY_INT_EN (0x00040000) /* R/W */
+#define INT_EN_PME_INT_EN (0x00020000) /* R/W */
+#define INT_EN_TXSO_EN (0x00010000) /* R/W */
+#define INT_EN_RWT_EN (0x00008000) /* R/W */
+#define INT_EN_RXE_EN (0x00004000) /* R/W */
+#define INT_EN_TXE_EN (0x00002000) /* R/W */
+/*#define INT_EN_ERX_EN (0x00001000)*/ /* R/W */
+#define INT_EN_TDFU_EN (0x00000800) /* R/W */
+#define INT_EN_TDFO_EN (0x00000400) /* R/W */
+#define INT_EN_TDFA_EN (0x00000200) /* R/W */
+#define INT_EN_TSFF_EN (0x00000100) /* R/W */
+#define INT_EN_TSFL_EN (0x00000080) /* R/W */
+/*#define INT_EN_RXDF_EN (0x00000040)*/ /* R/W */
+#define INT_EN_RDFO_EN (0x00000040) /* R/W */
+#define INT_EN_RDFL_EN (0x00000020) /* R/W */
+#define INT_EN_RSFF_EN (0x00000010) /* R/W */
+#define INT_EN_RSFL_EN (0x00000008) /* R/W */
+#define INT_EN_GPIO2_INT (0x00000004) /* R/W */
+#define INT_EN_GPIO1_INT (0x00000002) /* R/W */
+#define INT_EN_GPIO0_INT (0x00000001) /* R/W */
+
+#define BYTE_TEST __REG(CONFIG_DRIVER_SMC911X_BASE + 0x64)
+#define FIFO_INT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x68)
+#define FIFO_INT_TX_AVAIL_LEVEL (0xFF000000) /* R/W */
+#define FIFO_INT_TX_STS_LEVEL (0x00FF0000) /* R/W */
+#define FIFO_INT_RX_AVAIL_LEVEL (0x0000FF00) /* R/W */
+#define FIFO_INT_RX_STS_LEVEL (0x000000FF) /* R/W */
+
+#define RX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C)
+#define RX_CFG_RX_END_ALGN (0xC0000000) /* R/W */
+#define RX_CFG_RX_END_ALGN4 (0x00000000) /* R/W */
+#define RX_CFG_RX_END_ALGN16 (0x40000000) /* R/W */
+#define RX_CFG_RX_END_ALGN32 (0x80000000) /* R/W */
+#define RX_CFG_RX_DMA_CNT (0x0FFF0000) /* R/W */
+#define RX_CFG_RX_DUMP (0x00008000) /* R/W */
+#define RX_CFG_RXDOFF (0x00001F00) /* R/W */
+/*#define RX_CFG_RXBAD (0x00000001)*/ /* R/W */
+
+#define TX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x70)
+/*#define TX_CFG_TX_DMA_LVL (0xE0000000)*/ /* R/W */
+/*#define TX_CFG_TX_DMA_CNT (0x0FFF0000)*/ /* R/W */
+ /* Self Clearing */
+#define TX_CFG_TXS_DUMP (0x00008000)
+ /* Self Clearing */
+#define TX_CFG_TXD_DUMP (0x00004000)
+ /* Self Clearing */
+#define TX_CFG_TXSAO (0x00000004) /* R/W */
+#define TX_CFG_TX_ON (0x00000002) /* R/W */
+#define TX_CFG_STOP_TX (0x00000001)
+ /* Self Clearing */
+
+#define HW_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x74)
+#define HW_CFG_TTM (0x00200000) /* R/W */
+#define HW_CFG_SF (0x00100000) /* R/W */
+#define HW_CFG_TX_FIF_SZ (0x000F0000) /* R/W */
+#define HW_CFG_TR (0x00003000) /* R/W */
+#define HW_CFG_PHY_CLK_SEL (0x00000060) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_INT_PHY (0x00000000) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_EXT_PHY (0x00000020) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_CLK_DIS (0x00000040) /* R/W */
+#define HW_CFG_SMI_SEL (0x00000010) /* R/W */
+#define HW_CFG_EXT_PHY_DET (0x00000008) /* RO */
+#define HW_CFG_EXT_PHY_EN (0x00000004) /* R/W */
+#define HW_CFG_32_16_BIT_MODE (0x00000004) /* RO */
+#define HW_CFG_SRST_TO (0x00000002) /* RO */
+#define HW_CFG_SRST (0x00000001)
+ /* Self Clearing */
+
+#define RX_DP_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x78)
+#define RX_DP_CTRL_RX_FFWD (0x80000000) /* R/W */
+#define RX_DP_CTRL_FFWD_BUSY (0x80000000) /* RO */
+
+#define RX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C)
+#define RX_FIFO_INF_RXSUSED (0x00FF0000) /* RO */
+#define RX_FIFO_INF_RXDUSED (0x0000FFFF) /* RO */
+
+#define TX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x80)
+#define TX_FIFO_INF_TSUSED (0x00FF0000) /* RO */
+#define TX_FIFO_INF_TDFREE (0x0000FFFF) /* RO */
+
+#define PMT_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x84)
+#define PMT_CTRL_PM_MODE (0x00003000)
+ /* Self Clearing */
+#define PMT_CTRL_PHY_RST (0x00000400)
+ /* Self Clearing */
+#define PMT_CTRL_WOL_EN (0x00000200) /* R/W */
+#define PMT_CTRL_ED_EN (0x00000100) /* R/W */
+#define PMT_CTRL_PME_TYPE (0x00000040) /* R/W */
+ /* Not Affected by SW Reset */
+#define PMT_CTRL_WUPS (0x00000030) /* R/WC */
+#define PMT_CTRL_WUPS_NOWAKE (0x00000000) /* R/WC */
+#define PMT_CTRL_WUPS_ED (0x00000010) /* R/WC */
+#define PMT_CTRL_WUPS_WOL (0x00000020) /* R/WC */
+#define PMT_CTRL_WUPS_MULTI (0x00000030) /* R/WC */
+#define PMT_CTRL_PME_IND (0x00000008) /* R/W */
+#define PMT_CTRL_PME_POL (0x00000004) /* R/W */
+#define PMT_CTRL_PME_EN (0x00000002) /* R/W */
+ /* Not Affected by SW Reset */
+#define PMT_CTRL_READY (0x00000001) /* RO */
+
+#define GPIO_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x88)
+#define GPIO_CFG_LED3_EN (0x40000000) /* R/W */
+#define GPIO_CFG_LED2_EN (0x20000000) /* R/W */
+#define GPIO_CFG_LED1_EN (0x10000000) /* R/W */
+#define GPIO_CFG_GPIO2_INT_POL (0x04000000) /* R/W */
+#define GPIO_CFG_GPIO1_INT_POL (0x02000000) /* R/W */
+#define GPIO_CFG_GPIO0_INT_POL (0x01000000) /* R/W */
+#define GPIO_CFG_EEPR_EN (0x00700000) /* R/W */
+#define GPIO_CFG_GPIOBUF2 (0x00040000) /* R/W */
+#define GPIO_CFG_GPIOBUF1 (0x00020000) /* R/W */
+#define GPIO_CFG_GPIOBUF0 (0x00010000) /* R/W */
+#define GPIO_CFG_GPIODIR2 (0x00000400) /* R/W */
+#define GPIO_CFG_GPIODIR1 (0x00000200) /* R/W */
+#define GPIO_CFG_GPIODIR0 (0x00000100) /* R/W */
+#define GPIO_CFG_GPIOD4 (0x00000010) /* R/W */
+#define GPIO_CFG_GPIOD3 (0x00000008) /* R/W */
+#define GPIO_CFG_GPIOD2 (0x00000004) /* R/W */
+#define GPIO_CFG_GPIOD1 (0x00000002) /* R/W */
+#define GPIO_CFG_GPIOD0 (0x00000001) /* R/W */
+
+#define GPT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C)
+#define GPT_CFG_TIMER_EN (0x20000000) /* R/W */
+#define GPT_CFG_GPT_LOAD (0x0000FFFF) /* R/W */
+
+#define GPT_CNT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x90)
+#define GPT_CNT_GPT_CNT (0x0000FFFF) /* RO */
+
+#define ENDIAN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x98)
+#define FREE_RUN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C)
+#define RX_DROP __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0)
+#define MAC_CSR_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4)
+#define MAC_CSR_CMD_CSR_BUSY (0x80000000)
+ /* Self Clearing */
+#define MAC_CSR_CMD_R_NOT_W (0x40000000) /* R/W */
+#define MAC_CSR_CMD_CSR_ADDR (0x000000FF) /* R/W */
+
+#define MAC_CSR_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8)
+#define AFC_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC)
+#define AFC_CFG_AFC_HI (0x00FF0000) /* R/W */
+#define AFC_CFG_AFC_LO (0x0000FF00) /* R/W */
+#define AFC_CFG_BACK_DUR (0x000000F0) /* R/W */
+#define AFC_CFG_FCMULT (0x00000008) /* R/W */
+#define AFC_CFG_FCBRD (0x00000004) /* R/W */
+#define AFC_CFG_FCADD (0x00000002) /* R/W */
+#define AFC_CFG_FCANY (0x00000001) /* R/W */
+
+#define E2P_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0)
+#define E2P_CMD_EPC_BUSY (0x80000000)
+ /* Self Clearing */
+#define E2P_CMD_EPC_CMD (0x70000000) /* R/W */
+#define E2P_CMD_EPC_CMD_READ (0x00000000) /* R/W */
+#define E2P_CMD_EPC_CMD_EWDS (0x10000000) /* R/W */
+#define E2P_CMD_EPC_CMD_EWEN (0x20000000) /* R/W */
+#define E2P_CMD_EPC_CMD_WRITE (0x30000000) /* R/W */
+#define E2P_CMD_EPC_CMD_WRAL (0x40000000) /* R/W */
+#define E2P_CMD_EPC_CMD_ERASE (0x50000000) /* R/W */
+#define E2P_CMD_EPC_CMD_ERAL (0x60000000) /* R/W */
+#define E2P_CMD_EPC_CMD_RELOAD (0x70000000) /* R/W */
+#define E2P_CMD_EPC_TIMEOUT (0x00000200) /* RO */
+#define E2P_CMD_MAC_ADDR_LOADED (0x00000100) /* RO */
+#define E2P_CMD_EPC_ADDR (0x000000FF) /* R/W */
+
+#define E2P_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4)
+#define E2P_DATA_EEPROM_DATA (0x000000FF) /* R/W */
+/* end of LAN register offsets and bit definitions */
+
+/* MAC Control and Status registers */
+#define MAC_CR (0x01) /* R/W */
+
+/* MAC_CR - MAC Control Register */
+#define MAC_CR_RXALL (0x80000000)
+/* TODO: delete this bit? It is not described in the data sheet. */
+#define MAC_CR_HBDIS (0x10000000)
+#define MAC_CR_RCVOWN (0x00800000)
+#define MAC_CR_LOOPBK (0x00200000)
+#define MAC_CR_FDPX (0x00100000)
+#define MAC_CR_MCPAS (0x00080000)
+#define MAC_CR_PRMS (0x00040000)
+#define MAC_CR_INVFILT (0x00020000)
+#define MAC_CR_PASSBAD (0x00010000)
+#define MAC_CR_HFILT (0x00008000)
+#define MAC_CR_HPFILT (0x00002000)
+#define MAC_CR_LCOLL (0x00001000)
+#define MAC_CR_BCAST (0x00000800)
+#define MAC_CR_DISRTY (0x00000400)
+#define MAC_CR_PADSTR (0x00000100)
+#define MAC_CR_BOLMT_MASK (0x000000C0)
+#define MAC_CR_DFCHK (0x00000020)
+#define MAC_CR_TXEN (0x00000008)
+#define MAC_CR_RXEN (0x00000004)
+
+#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */
+#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */
+#define HASHH (0x04) /* R/W */
+#define HASHL (0x05) /* R/W */
+
+#define MII_ACC (0x06) /* R/W */
+#define MII_ACC_PHY_ADDR (0x0000F800)
+#define MII_ACC_MIIRINDA (0x000007C0)
+#define MII_ACC_MII_WRITE (0x00000002)
+#define MII_ACC_MII_BUSY (0x00000001)
+
+#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */
+
+#define FLOW (0x08) /* R/W */
+#define FLOW_FCPT (0xFFFF0000)
+#define FLOW_FCPASS (0x00000004)
+#define FLOW_FCEN (0x00000002)
+#define FLOW_FCBSY (0x00000001)
+
+#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */
+#define VLAN1_VTI1 (0x0000ffff)
+
+#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */
+#define VLAN2_VTI2 (0x0000ffff)
+
+#define WUFF (0x0B) /* WO */
+
+#define WUCSR (0x0C) /* R/W */
+#define WUCSR_GUE (0x00000200)
+#define WUCSR_WUFR (0x00000040)
+#define WUCSR_MPR (0x00000020)
+#define WUCSR_WAKE_EN (0x00000004)
+#define WUCSR_MPEN (0x00000002)
+
+/* Chip ID values */
+#define CHIP_9115 0x115
+#define CHIP_9116 0x116
+#define CHIP_9117 0x117
+#define CHIP_9118 0x118
+#define CHIP_9215 0x115a
+#define CHIP_9216 0x116a
+#define CHIP_9217 0x117a
+#define CHIP_9218 0x118a
+
+struct chip_id {
+ u16 id;
+ char *name;
+};
+
+static const struct chip_id chip_ids[] = {
+ { CHIP_9115, "LAN9115" },
+ { CHIP_9116, "LAN9116" },
+ { CHIP_9117, "LAN9117" },
+ { CHIP_9118, "LAN9118" },
+ { CHIP_9215, "LAN9215" },
+ { CHIP_9216, "LAN9216" },
+ { CHIP_9217, "LAN9217" },
+ { CHIP_9218, "LAN9218" },
+ { 0, NULL },
+};
+
+#define DRIVERNAME "smc911x"
+
+u32 smc911x_get_mac_csr(u8 reg)
+{
+ while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+ MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg;
+ while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+
+ return MAC_CSR_DATA;
+}
+
+void smc911x_set_mac_csr(u8 reg, u32 data)
+{
+ while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+ MAC_CSR_DATA = data;
+ MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg;
+ while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); }
+
+static int smx911x_handle_mac_address(bd_t *bd)
+{
+ unsigned long addrh, addrl;
+ unsigned char *m = bd->bi_enetaddr;
+
+ /* if the environment has a valid mac address then use it */
+ if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) {
+ addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24;
+ addrh = m[4] | m[5] << 8;
+ smc911x_set_mac_csr(ADDRH, addrh);
+ smc911x_set_mac_csr(ADDRL, addrl);
+ } else {
+ /* if not, try to get one from the eeprom */
+ addrh = smc911x_get_mac_csr(ADDRH);
+ addrl = smc911x_get_mac_csr(ADDRL);
+
+ m[0] = (addrl) & 0xff;
+ m[1] = (addrl >> 8) & 0xff;
+ m[2] = (addrl >> 16) & 0xff;
+ m[3] = (addrl >> 24) & 0xff;
+ m[4] = (addrh) & 0xff;
+ m[5] = (addrh >> 8) & 0xff;
+
+ /* we get 0xff when there is no eeprom connected */
+ if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) {
+ printf(DRIVERNAME ": no valid mac address "
+ "in environment "
+ "and no eeprom found\n");
+ return -1;
+ }
+ }
+
+ printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ m[0], m[1], m[2], m[3], m[4], m[5]);
+
+ return 0;
+}
+
+static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val)
+{
+ while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+ smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY);
+
+ while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+ *val = smc911x_get_mac_csr(MII_DATA);
+
+ return 0;
+}
+
+static int smc911x_miiphy_write(u8 phy, u8 reg, u16 val)
+{
+ while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+ smc911x_set_mac_csr(MII_DATA, val);
+ smc911x_set_mac_csr(MII_ACC,
+ phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE);
+
+ while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+ return 0;
+}
+
+static int smc911x_phy_reset(void)
+{
+ u32 reg;
+
+ reg = PMT_CTRL;
+ reg &= ~0xfffff030;
+ reg |= PMT_CTRL_PHY_RST;
+ PMT_CTRL = reg;
+
+ mdelay(100);
+
+ return 0;
+}
+
+static void smc911x_phy_configure(void)
+{
+ int timeout;
+ u16 status;
+
+ smc911x_phy_reset();
+
+ smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET);
+ mdelay(1);
+ smc911x_miiphy_write(1, PHY_ANAR, 0x01e1);
+ smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+
+ timeout = 5000;
+ do {
+ mdelay(1);
+ if ((timeout--) == 0)
+ goto err_out;
+
+ if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0)
+ goto err_out;
+ } while (!(status & PHY_BMSR_LS));
+
+ printf(DRIVERNAME ": phy initialized\n");
+
+ return;
+
+err_out:
+ printf(DRIVERNAME ": autonegotiation timed out\n"); }
+
+static void smc911x_reset(void)
+{
+ int timeout;
+
+ /* Take out of PM setting first */
+ if (PMT_CTRL & PMT_CTRL_READY) {
+ /* Write to the bytetest will take out of powerdown */
+ BYTE_TEST = 0x0;
+
+ timeout = 10;
+
+ while (timeout-- && !(PMT_CTRL & PMT_CTRL_READY))
+ udelay(10);
+ if (!timeout) {
+ printf(DRIVERNAME
+ ": timeout waiting for PM restore\n");
+ return;
+ }
+ }
+
+ /* Disable interrupts */
+ INT_EN = 0;
+
+ HW_CFG = HW_CFG_SRST;
+
+ timeout = 1000;
+ while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY)
+ udelay(10);
+
+ if (!timeout) {
+ printf(DRIVERNAME ": reset timeout\n");
+ return;
+ }
+
+ /* Reset the FIFO level and flow control settings */
+ smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
+ AFC_CFG = 0x0050287F;
+
+ /* Set to LED outputs */
+ GPIO_CFG = 0x70070000;
+}
+
+static void smc911x_enable(void)
+{
+ /* Enable TX */
+ HW_CFG = 8 << 16 | HW_CFG_SF;
+
+ GPT_CFG = GPT_CFG_TIMER_EN | 10000;
+
+ TX_CFG = TX_CFG_TX_ON;
+
+ /* no padding to start of packets */
+ RX_CFG = 0;
+
+ smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
+
+}
+
+int eth_init(bd_t *bd)
+{
+ unsigned long val, i;
+
+ printf(DRIVERNAME ": initializing\n");
+
+ val = BYTE_TEST;
+ if (val != 0x87654321) {
+ printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val);
+ goto err_out;
+ }
+
+ val = ID_REV >> 16;
+ for (i = 0; chip_ids[i].id != 0; i++) {
+ if (chip_ids[i].id == val)
+ break;
+ }
+ if (!chip_ids[i].id) {
+ printf(DRIVERNAME ": Unknown chip ID %04x\n", val);
+ goto err_out;
+ }
+
+ printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
+
+ smc911x_reset();
+
+ /* Configure the PHY, initialize the link state */
+ smc911x_phy_configure();
+
+ if (smx911x_handle_mac_address(bd))
+ goto err_out;
+
+ /* Turn on Tx + Rx */
+ smc911x_enable();
+
+ return 0;
+
+err_out:
+ return -1;
+}
+
+int eth_send(volatile void *packet, int length)
+{
+ u32 *data = (u32 *)packet;
+ u32 tmplen;
+ u32 status;
+
+ TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length;
+ TX_DATA_FIFO = length;
+
+ tmplen = (length + 3) / 4;
+
+ while (tmplen--)
+ TX_DATA_FIFO = *data++;
+
+ /* wait for transmission */
+ while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16));
+
+ /* get status. Ignore 'no carrier' error, it has no meaning for
+ * full duplex operation
+ */
+ status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL |
+ TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
+
+ if (!status)
+ return 0;
+
+ printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n",
+ status & TX_STS_LOC ? "TX_STS_LOC " : "",
+ status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "",
+ status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "",
+ status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "",
+ status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : "");
+
+ return -1;
+}
+
+void eth_halt(void)
+{
+ smc911x_reset();
+}
+
+int eth_rx(void)
+{
+ u32 *data = (u32 *)NetRxPackets[0];
+ u32 pktlen, tmplen;
+ u32 status;
+
+ if ((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) {
+ status = RX_STATUS_FIFO;
+ pktlen = (status & RX_STS_PKT_LEN) >> 16;
+
+ RX_CFG = 0;
+
+ tmplen = (pktlen + 2 + 3) / 4;
+ while (tmplen--)
+ *data++ = RX_DATA_FIFO;
+
+ if (status & RX_STS_ES)
+ printf(DRIVERNAME
+ ": dropped bad packet. Status: 0x%08x\n",
+ status);
+ else
+ NetReceive(NetRxPackets[0], pktlen);
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_DRIVER_SMC911X */
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
index ebcdcfea1e9960d9f44c323cd87baf547b375e75..2b3eb90c322f26ce90142b82ea23595f0f32a654 100644
--- a/include/asm-arm/arch-davinci/hardware.h
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -150,6 +150,8 @@ typedef volatile unsigned int * dv_reg_p;
#define VDD3P3V_PWDN (0x01c40048)
#define UART0_PWREMU_MGMT (0x01c20030)
+#define UART1_PWREMU_MGMT (0x01c20430)
+#define UART2_PWREMU_MGMT (0x01c20830)
#define PSC_SILVER_BULLET (0x01c41a20)
diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h
new file mode 100644
index 0000000000000000000000000000000000000000..2f0d80902a9d37a246a4cebdaece2ec6cc7e596b
--- /dev/null
+++ b/include/asm-arm/arch-mx31/mx31-regs.h
@@ -0,0 +1,151 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MX31_REGS_H
+#define __ASM_ARCH_MX31_REGS_H
+
+#define __REG(x) (*((volatile u32 *)(x)))
+#define __REG16(x) (*((volatile u16 *)(x)))
+#define __REG8(x) (*((volatile u8 *)(x)))
+
+#define CCM_BASE 0x53f80000
+#define CCM_CCMR (CCM_BASE + 0x00)
+#define CCM_PDR0 (CCM_BASE + 0x04)
+#define CCM_PDR1 (CCM_BASE + 0x08)
+#define CCM_RCSR (CCM_BASE + 0x0c)
+#define CCM_MPCTL (CCM_BASE + 0x10)
+#define CCM_UPCTL (CCM_BASE + 0x10)
+#define CCM_SPCTL (CCM_BASE + 0x18)
+#define CCM_COSR (CCM_BASE + 0x1C)
+
+#define CCMR_MDS (1 << 7)
+#define CCMR_SBYCS (1 << 4)
+#define CCMR_MPE (1 << 3)
+#define CCMR_PRCS_MASK (3 << 1)
+#define CCMR_FPM (1 << 1)
+#define CCMR_CKIH (2 << 1)
+
+#define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23)
+#define PDR0_PER_PODF(x) (((x) & 0x1f) << 16)
+#define PDR0_HSP_PODF(x) (((x) & 0x7) << 11)
+#define PDR0_NFC_PODF(x) (((x) & 0x7) << 8)
+#define PDR0_IPG_PODF(x) (((x) & 0x3) << 6)
+#define PDR0_MAX_PODF(x) (((x) & 0x7) << 3)
+#define PDR0_MCU_PODF(x) ((x) & 0x7)
+
+#define PLL_PD(x) (((x) & 0xf) << 26)
+#define PLL_MFD(x) (((x) & 0x3ff) << 16)
+#define PLL_MFI(x) (((x) & 0xf) << 10)
+#define PLL_MFN(x) (((x) & 0x3ff) << 0)
+
+#define WEIM_BASE 0xb8002000
+#define CSCR_U(x) (WEIM_BASE + (x) * 0x10)
+#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10)
+#define CSCR_A(x) (WEIM_BASE + 8 + (x) * 0x10)
+
+#define IOMUXC_BASE 0x43FAC000
+#define IOMUXC_GPR (IOMUXC_BASE + 0x8)
+#define IOMUXC_SW_MUX_CTL(x) (IOMUXC_BASE + 0xc + (x) * 4)
+#define IOMUXC_SW_PAD_CTL(x) (IOMUXC_BASE + 0x154 + (x) * 4)
+
+#define IPU_BASE 0x53fc0000
+#define IPU_CONF IPU_BASE
+
+#define IPU_CONF_PXL_ENDIAN (1<<8)
+#define IPU_CONF_DU_EN (1<<7)
+#define IPU_CONF_DI_EN (1<<6)
+#define IPU_CONF_ADC_EN (1<<5)
+#define IPU_CONF_SDC_EN (1<<4)
+#define IPU_CONF_PF_EN (1<<3)
+#define IPU_CONF_ROT_EN (1<<2)
+#define IPU_CONF_IC_EN (1<<1)
+#define IPU_CONF_SCI_EN (1<<0)
+
+#define WDOG_BASE 0x53FDC000
+
+/*
+ * Signal Multiplexing (IOMUX)
+ */
+
+/* bits in the SW_MUX_CTL registers */
+#define MUX_CTL_OUT_GPIO_DR (0 << 4)
+#define MUX_CTL_OUT_FUNC (1 << 4)
+#define MUX_CTL_OUT_ALT1 (2 << 4)
+#define MUX_CTL_OUT_ALT2 (3 << 4)
+#define MUX_CTL_OUT_ALT3 (4 << 4)
+#define MUX_CTL_OUT_ALT4 (5 << 4)
+#define MUX_CTL_OUT_ALT5 (6 << 4)
+#define MUX_CTL_OUT_ALT6 (7 << 4)
+#define MUX_CTL_IN_NONE (0 << 0)
+#define MUX_CTL_IN_GPIO (1 << 0)
+#define MUX_CTL_IN_FUNC (2 << 0)
+#define MUX_CTL_IN_ALT1 (4 << 0)
+#define MUX_CTL_IN_ALT2 (8 << 0)
+
+#define MUX_CTL_FUNC (MUX_CTL_OUT_FUNC | MUX_CTL_IN_FUNC)
+#define MUX_CTL_ALT1 (MUX_CTL_OUT_ALT1 | MUX_CTL_IN_ALT1)
+#define MUX_CTL_ALT2 (MUX_CTL_OUT_ALT2 | MUX_CTL_IN_ALT2)
+#define MUX_CTL_GPIO (MUX_CTL_OUT_GPIO_DR | MUX_CTL_IN_GPIO)
+
+/* Register offsets based on IOMUXC_BASE */
+/* 0x00 .. 0x7b */
+#define MUX_CTL_RTS1 0x7c
+#define MUX_CTL_CTS1 0x7d
+#define MUX_CTL_DTR_DCE1 0x7e
+#define MUX_CTL_DSR_DCE1 0x7f
+#define MUX_CTL_CSPI2_SCLK 0x80
+#define MUX_CTL_CSPI2_SPI_RDY 0x81
+#define MUX_CTL_RXD1 0x82
+#define MUX_CTL_TXD1 0x83
+#define MUX_CTL_CSPI2_MISO 0x84
+/* 0x85 .. 0x8a */
+#define MUX_CTL_CSPI2_MOSI 0x8b
+
+/* The modes a specific pin can be in
+ * these macros can be used in mx31_gpio_mux() and have the form
+ * MUX_[contact name]__[pin function]
+ */
+#define MUX_RXD1__UART1_RXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1)
+#define MUX_TXD1__UART1_TXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1)
+#define MUX_RTS1__UART1_RTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1)
+#define MUX_RTS1__UART1_CTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
+
+#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI)
+#define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE 0x70000000
+#define CSD0_BASE 0x80000000
+#define CSD1_BASE 0x90000000
+#define CS0_BASE 0xA0000000
+#define CS1_BASE 0xA8000000
+#define CS2_BASE 0xB0000000
+#define CS3_BASE 0xB2000000
+#define CS4_BASE 0xB4000000
+#define CS4_PSRAM_BASE 0xB5000000
+#define CS5_BASE 0xB6000000
+#define PCMCIA_MEM_BASE 0xC0000000
+
+#endif /* __ASM_ARCH_MX31_REGS_H */
diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
new file mode 100644
index 0000000000000000000000000000000000000000..f89a401bbcf3f8b9d11d381fabd55b098fcb1d98
--- /dev/null
+++ b/include/asm-arm/arch-mx31/mx31.h
@@ -0,0 +1,32 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MX31_H
+#define __ASM_ARCH_MX31_H
+
+u32 mx31_get_mpl_dpdgck_clk(void);
+u32 mx31_get_mcu_main_clk(void);
+u32 mx31_get_ipg_clk(void);
+void mx31_gpio_mux(unsigned long mode);
+
+#endif /* __ASM_ARCH_MX31_H */
diff --git a/include/asm-arm/arch-arm1136/bits.h b/include/asm-arm/arch-omap24xx/bits.h
similarity index 100%
rename from include/asm-arm/arch-arm1136/bits.h
rename to include/asm-arm/arch-omap24xx/bits.h
diff --git a/include/asm-arm/arch-arm1136/clocks.h b/include/asm-arm/arch-omap24xx/clocks.h
similarity index 100%
rename from include/asm-arm/arch-arm1136/clocks.h
rename to include/asm-arm/arch-omap24xx/clocks.h
diff --git a/include/asm-arm/arch-arm1136/i2c.h b/include/asm-arm/arch-omap24xx/i2c.h
similarity index 100%
rename from include/asm-arm/arch-arm1136/i2c.h
rename to include/asm-arm/arch-omap24xx/i2c.h
diff --git a/include/asm-arm/arch-arm1136/mem.h b/include/asm-arm/arch-omap24xx/mem.h
similarity index 100%
rename from include/asm-arm/arch-arm1136/mem.h
rename to include/asm-arm/arch-omap24xx/mem.h
diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-omap24xx/mux.h
similarity index 100%
rename from include/asm-arm/arch-arm1136/mux.h
rename to include/asm-arm/arch-omap24xx/mux.h
diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-omap24xx/omap2420.h
similarity index 100%
rename from include/asm-arm/arch-arm1136/omap2420.h
rename to include/asm-arm/arch-omap24xx/omap2420.h
diff --git a/include/asm-arm/arch-arm1136/sizes.h b/include/asm-arm/arch-omap24xx/sizes.h
similarity index 100%
rename from include/asm-arm/arch-arm1136/sizes.h
rename to include/asm-arm/arch-omap24xx/sizes.h
diff --git a/include/asm-arm/arch-arm1136/sys_info.h b/include/asm-arm/arch-omap24xx/sys_info.h
similarity index 100%
rename from include/asm-arm/arch-arm1136/sys_info.h
rename to include/asm-arm/arch-omap24xx/sys_info.h
diff --git a/include/asm-arm/arch-arm1136/sys_proto.h b/include/asm-arm/arch-omap24xx/sys_proto.h
similarity index 100%
rename from include/asm-arm/arch-arm1136/sys_proto.h
rename to include/asm-arm/arch-omap24xx/sys_proto.h
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 8ecd0595a2040282322b83309bd09f35ce3c9840..17d3b03dd54fdc031e3b42f6536df1a5ca2d8b57 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -52,6 +52,9 @@
#define DV_EVM
#define CFG_NAND_SMALLPAGE
#define CFG_USE_NOR
+#define CFG_USE_INTEL_NOR /* Define this when your DVEVM has Intel
+ * flash instead of AMD flash
+ */
/*===================*/
/* SoC Configuration */
/*===================*/
@@ -60,6 +63,24 @@
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
+#define CFG_DAVINCI_PINMUX_0 0x00000c1f
+#define CFG_DAVINCI_WAITCFG 0x00000000
+#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */
+#define CFG_DAVINCI_ACFG3 0x3ffffffd
+#define CFG_DAVINCI_ACFG4 0x3ffffffd
+#define CFG_DAVINCI_ACFG5 0x3ffffffd
+#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */
+#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
+#define CFG_DAVINCI_SDREF 0x000005c3
+#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */
+#define CFG_DAVINCI_SDTIM0 0x28923211
+#define CFG_DAVINCI_SDTIM1 0x0016c722
+#define CFG_DAVINCI_MMARG_BRF0 0x00444400
+/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
+#define CFG_DAVINCI_PLL1_PLLM 0x15
+#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
+#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
+#define CFG_DAVINCI_PLL2_DIV2 0x01
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
@@ -114,7 +135,7 @@
#ifdef CFG_USE_NAND
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#ifdef CFG_NAND_SMALLPAGE
#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
#define CFG_ENV_SIZE SZ_16K
@@ -139,24 +160,31 @@
#undef CONFIG_SKIP_RELOCATE_UBOOT
#endif
#define CFG_ENV_IS_IN_FLASH
-#undef CFG_NO_FLASH
+#undef CFG_NO_FLASH
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
-#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
-#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
-#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
+#define CFG_ENV_OFFSET (CFG_ENV_ADDR)
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
-#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
+#ifdef CFG_USE_INTEL_NOR
+#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */
+#define CFG_FLASH_PROTECTION 1
+#else
+#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
+#endif
#endif
/*==============================*/
/* U-Boot general configuration */
/*==============================*/
-#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#define CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
+#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 96c9a30147828810e780029abd4427696728d923..cb69535e141114579aeaab7289b5729b99455466 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -35,6 +35,24 @@
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
+#define CFG_DAVINCI_PINMUX_0 0x00000c1f
+#define CFG_DAVINCI_WAITCFG 0x00000000
+#define CFG_DAVINCI_ACFG2 0x0432229c /* CE configs */
+#define CFG_DAVINCI_ACFG3 0x3ffffffd
+#define CFG_DAVINCI_ACFG4 0x3ffffffd
+#define CFG_DAVINCI_ACFG5 0x3ffffffd
+#define CFG_DAVINCI_NANDCE 2 /* When using NAND, define 2,3 or 4 */
+#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
+#define CFG_DAVINCI_SDREF 0x000005c3
+#define CFG_DAVINCI_SDCFG 0x00178622 /* 4 banks */
+#define CFG_DAVINCI_SDTIM0 0x28923211
+#define CFG_DAVINCI_SDTIM1 0x0016c722
+#define CFG_DAVINCI_MMARG_BRF0 0x00444400
+/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
+#define CFG_DAVINCI_PLL1_PLLM 0x15
+#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
+#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
+#define CFG_DAVINCI_PLL2_DIV2 0x01
/*=============*/
/* Memory Info */
/*=============*/
@@ -46,7 +64,6 @@
#define CONFIG_STACKSIZE (256*1024) /* regular stack */
#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
-#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
/*====================*/
/* Serial Driver info */
/*====================*/
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index de8c4fac2b00fe2b0d3a5edbbbe5612ce61fc79b..b2c0d7d175d67d7077e33d4ce76b5af32096f3df 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -60,6 +60,24 @@
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
+#define CFG_DAVINCI_PINMUX_0 0x00000c1f
+#define CFG_DAVINCI_WAITCFG 0x00000000
+#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */
+#define CFG_DAVINCI_ACFG3 0x3ffffffd
+#define CFG_DAVINCI_ACFG4 0x3ffffffd
+#define CFG_DAVINCI_ACFG5 0x3ffffffd
+#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */
+#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
+#define CFG_DAVINCI_SDREF 0x000005c3
+#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */
+#define CFG_DAVINCI_SDTIM0 0x28923211
+#define CFG_DAVINCI_SDTIM1 0x0016c722
+#define CFG_DAVINCI_MMARG_BRF0 0x00444400
+/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
+#define CFG_DAVINCI_PLL1_PLLM 0x15
+#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
+#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
+#define CFG_DAVINCI_PLL2_DIV2 0x01
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
new file mode 100644
index 0000000000000000000000000000000000000000..a6ed77a98b4f0efa89684c0bbcaf903a5c4d7cfb
--- /dev/null
+++ b/include/configs/imx31_litekit.h
@@ -0,0 +1,167 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Kshitij Gupta <kshitij@ti.com>
+ *
+ * Configuration settings for the 242x TI H4 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
+#define CONFIG_MX31 1 /* in a mx31 */
+#define CONFIG_MX31_HCLK_FREQ 26000000
+#define CONFIG_MX31_CLK32 32000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Temporarily disabled */
+#if 0
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_FIT 1
+#define CONFIG_FIT_VERBOSE 1
+#endif
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
+#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_MX31_UART 1
+#define CFG_MX31_UART1 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.23.168
+#define CONFIG_SERVERIP 192.168.23.2
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
+ "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
+ "ip=dhcp nfsroot=$(serverip):$(nfsrootfs), v3, tcp\0" \
+ "bootcmd=run bootcmd_net\0" \
+ "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
+ "tftpboot 0x80000000 uImage-mx31; bootm\0" \
+ "prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; " \
+ "protect off all; erase 0xa00d0000 0xa01effff; " \
+ "cp.b 0x80000000 0xa00d0000 $(filesize)\0"
+
+#define CONFIG_DRIVER_SMC911X 1
+#define CONFIG_DRIVER_SMC911X_BASE 0xb4020000
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "uboot> "
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0 /* memtest works on */
+#define CFG_MEMTEST_END 0x10000
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0 /* default load address */
+
+#define CFG_HZ 32000
+
+#define CONFIG_CMDLINE_EDITING 1
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0x80000000
+#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_FLASH_BASE 0xa0000000
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+/* Monitor at beginning of flash */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+
+#define CFG_ENV_ADDR 0xa01f0000
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SECT_SIZE (64 * 1024)
+#define CFG_ENV_SIZE (64 * 1024)
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */
+
+/*
+ * JFFS2 partitions
+ */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV "nor0"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
new file mode 100644
index 0000000000000000000000000000000000000000..647b05b327414416f6976065751b784d33f59795
--- /dev/null
+++ b/include/configs/imx31_phycore.h
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Kshitij Gupta <kshitij@ti.com>
+ *
+ * Configuration settings for the 242x TI H4 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
+#define CONFIG_MX31 1 /* in a mx31 */
+#define CONFIG_MX31_HCLK_FREQ 26000000
+#define CONFIG_MX31_CLK32 32000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Temporarily disabled */
+#if 0
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_FIT 1
+#define CONFIG_FIT_VERBOSE 1
+#endif
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
+#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_HARD_I2C 1
+#define CONFIG_I2C_MXC 1
+#define CFG_I2C_MX31_PORT2 1
+#define CFG_I2C_SPEED 100000
+#define CFG_I2C_SLAVE 0xfe
+
+#define CONFIG_MX31_UART 1
+#define CFG_MX31_UART1 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+
+#define CONFIG_BOOTDELAY 3
+
+#define MTDPARTS_DEFAULT \
+ "mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.23.168
+#define CONFIG_SERVERIP 192.168.23.2
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
+ "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
+ "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
+ "bootargs_flash=setenv bootargs $(bootargs) " \
+ "root=/dev/mtdblock2 rootfstype=jffs2\0" \
+ "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \
+ "bootcmd=run bootcmd_net\0" \
+ "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
+ "tftpboot 0x80000000 $(uimage); bootm\0" \
+ "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; " \
+ "bootm 0x80000000\0" \
+ "unlock=yes\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "prg_uboot=tftpboot 0x80000000 $(uboot); " \
+ "protect off 0xa0000000 +0x20000; " \
+ "erase 0xa0000000 +0x20000; " \
+ "cp.b 0x80000000 0xa0000000 $(filesize)\0" \
+ "prg_kernel=tftpboot 0x80000000 $(uimage); " \
+ "erase 0xa0040000 +0x180000; " \
+ "cp.b 0x80000000 0xa0040000 $(filesize)\0" \
+ "prg_jffs2=tftpboot 0x80000000 $(jffs2); " \
+ "erase 0xa01c0000 0xa1ffffff; " \
+ "cp.b 0x80000000 0xa01c0000 $(filesize)\0"
+
+#define CONFIG_DRIVER_SMC911X 1
+#define CONFIG_DRIVER_SMC911X_BASE 0xa8000000
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "uboot> "
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0 /* memtest works on */
+#define CFG_MEMTEST_END 0x10000
+
+#define CFG_LOAD_ADDR 0 /* default load address */
+
+#define CFG_HZ 32000
+
+#define CONFIG_CMDLINE_EDITING 1
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0x80000000
+#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_FLASH_BASE 0xa0000000
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 259 /* max number of sectors on one chip */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
+
+#define CFG_ENV_IS_IN_EEPROM 1
+#define CFG_ENV_OFFSET 0x00 /* environment starts here */
+#define CFG_ENV_SIZE 4096
+#define CFG_I2C_EEPROM_ADDR 0x52
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */
+
+/*
+ * JFFS2 partitions
+ */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV "nor0"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
new file mode 100644
index 0000000000000000000000000000000000000000..be7f3c6c03aa7d177e4138e27c44a947d8bcb403
--- /dev/null
+++ b/include/configs/mx31ads.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * Configuration settings for the MX31ADS Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx31-regs.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
+#define CONFIG_MX31 1 /* in a mx31 */
+#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */
+#define CONFIG_MX31_CLK32 32000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/*
+ * Disabled for now due to build problems under Debian and
+ * a significant increase in the final file size: 144260 vs. 109536 Bytes
+ */
+#if 0
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_FIT 1
+#define CONFIG_FIT_VERBOSE 1
+#endif
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
+#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_MX31_UART 1
+#define CFG_MX31_UART1 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.23.168
+#define CONFIG_SERVERIP 192.168.23.2
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
+ "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
+ "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
+ "bootcmd=run bootcmd_net\0" \
+ "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
+ "tftpboot 0x80000000 uImage-mx31; bootm\0" \
+ "prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; " \
+ "protect off 0xa0000000 0xa001ffff; " \
+ "erase 0xa0000000 0xa001ffff; " \
+ "cp.b 0x80000000 0xa0000000 $(filesize)\0"
+
+#define CONFIG_DRIVER_CS8900 1
+#define CS8900_BASE 0xb4020300
+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> "
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0 /* memtest works on */
+#define CFG_MEMTEST_END 0x10000
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR CSD0_BASE /* default load address */
+
+#define CFG_HZ 32000
+
+#define CONFIG_CMDLINE_EDITING 1
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CSD0_BASE
+#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_FLASH_BASE CS0_BASE
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
+#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128KiB */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SECT_SIZE (32 * 1024)
+#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+/* S29WS256N NOR flash has 4 32KiB small sectors at beginning and end.
+ * The rest of 32MiB is in 128KiB big sectors.
+ * U-Boot occupies the low 4 sectors,
+ * if we put environment next to it, we will have to occupy 128KiB for it.
+ * Putting it at the top of flash we use only 32KiB. */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
+#if 0 /* Doesn't work yet, work in progress */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes(~10x faster)*/
+#endif
+#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
+
+/*
+ * JFFS2 partitions
+ */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV "nor0"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/pmdra.h b/include/configs/pmdra.h
new file mode 100644
index 0000000000000000000000000000000000000000..e170ee9ccdc3c64338049f79aba0a817b77b0a7d
--- /dev/null
+++ b/include/configs/pmdra.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 2008 Prodrive BV <pieter.voorthijsen@prodrive.nl>
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*=======*/
+/* Board */
+/*=======*/
+#define CFG_PMDRA
+#define CFG_NAND_LARGEPAGE
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ ((CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1))/2)
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+#define CFG_DAVINCI_PINMUX_0 0x00000c1f
+#define CFG_DAVINCI_WAITCFG 0x10000000
+#define CFG_DAVINCI_ACFG2 0x00460385 /* NOR CE Config */
+#define CFG_DAVINCI_ACFG3 0x0822218c /* NAND CE Config */
+#define CFG_DAVINCI_ACFG4 0x3ffffffd
+#define CFG_DAVINCI_ACFG5 0x3ffffffd
+#define CFG_DAVINCI_NANDCE 3 /* Use CE3 for NAND */
+#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
+#define CFG_DAVINCI_SDREF 0x000005c3
+#define CFG_DAVINCI_SDCFG 0x00178832 /* 8 banks , CAS = 4*/
+#define CFG_DAVINCI_SDTIM0 0x28923211
+#define CFG_DAVINCI_SDTIM1 0x0016c722
+#define CFG_DAVINCI_MMARG_BRF0 0x00444400
+/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
+#define CFG_DAVINCI_PLL1_PLLM 0x12
+#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
+#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
+#define CFG_DAVINCI_PLL2_DIV2 0x01
+/*====================================================*/
+/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
+/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
+/*====================================================*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
+#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_COM2 0x01c20800 /* Base address of UART2 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 50000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#define CFG_USE_NAND
+#define CFG_NAND_BASE 0x04000000
+#undef CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define DEF_BOOTM ""
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
+#define CFG_ENV_OFFSET (CFG_ENV_ADDR)
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster)*/
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
+#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
+#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */
+#define CFG_FLASH_PROTECTION 1
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_ENV_OVERWRITE
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_BOOTARGS \
+ "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "run nand"
+#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#define CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */