diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 4a75c7b279c5ddbe416783234a5ba2c865da2f52..a29fc42d5a354cced9c526de76d0cd2b83e2b9b9 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -37,6 +37,7 @@
 #include "../common/vpd_reader.h"
 #include "../../../drivers/net/e1000.h"
 #include <pci.h>
+#include <panel.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -124,16 +125,20 @@ int board_phy_config(struct phy_device *phydev)
 }
 
 #if defined(CONFIG_VIDEO_IPUV3)
-static iomux_v3_cfg_t const backlight_pads[] = {
-	/* Power for LVDS Display */
-	MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
-#define LVDS_POWER_GP IMX_GPIO_NR(3, 22)
-	/* Backlight enable for LVDS display */
-	MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
-#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 0)
-	/* backlight PWM brightness control */
-	MX6_PAD_SD1_DAT3__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
+static void do_enable_backlight(struct display_info_t const *dev)
+{
+	struct udevice *panel;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_PANEL, 0, &panel);
+	if (ret) {
+		printf("Could not find panel: %d\n", ret);
+		return;
+	}
+
+	panel_set_backlight(panel, 100);
+	panel_enable_backlight(panel);
+}
 
 static void do_enable_hdmi(struct display_info_t const *dev)
 {
@@ -155,7 +160,7 @@ struct display_info_t const displays[] = {{
 	.addr	= -1,
 	.pixfmt	= IPU_PIX_FMT_RGB24,
 	.detect	= detect_lcd,
-	.enable	= NULL,
+	.enable	= do_enable_backlight,
 	.mode	= {
 		.name           = "G121X1-L03",
 		.refresh        = 60,
@@ -314,12 +319,6 @@ static void setup_display_bx50v3(void)
 			IOMUXC_GPR3_LVDS0_MUX_CTL_MASK,
 		       (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
 			IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET));
-
-	/* backlights off until needed */
-	imx_iomux_v3_setup_multiple_pads(backlight_pads,
-					 ARRAY_SIZE(backlight_pads));
-	gpio_request(LVDS_POWER_GP, "lvds_power");
-	gpio_direction_input(LVDS_POWER_GP);
 }
 #endif /* CONFIG_VIDEO_IPUV3 */
 
@@ -476,9 +475,6 @@ int board_init(void)
 		setup_display_b850v3();
 	else
 		setup_display_bx50v3();
-
-	gpio_request(LVDS_BACKLIGHT_GP, "lvds_backlight");
-	gpio_direction_input(LVDS_BACKLIGHT_GP);
 #endif
 
 	/* address of boot parameters */
@@ -590,51 +586,6 @@ int ft_board_setup(void *blob, bd_t *bd)
 }
 #endif
 
-static int do_backlight_enable(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-#if CONFIG_IS_ENABLED(DM_VIDEO)
-	int ret;
-	struct udevice *dev;
-
-#ifdef CONFIG_VIDEO_IPUV3
-	if (!is_b850v3()) {
-		gpio_direction_output(LVDS_POWER_GP, 1);
-
-		/* We need at least 200ms between power on and backlight on
-		 * as per specifications from CHI MEI
-		 */
-		mdelay(250);
-
-		/* enable backlight PWM 1 */
-		pwm_init(0, 0, 0);
-
-		/* duty cycle 5000000ns, period: 5000000ns */
-		pwm_config(0, 5000000, 5000000);
-
-		/* Backlight Power */
-		gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
-
-		pwm_enable(0);
-	}
-#endif
-
-	/* Probe, to find a video device to be used to show a message on
-	 * the vidconsole.
-	 */
-	ret = uclass_get_device(UCLASS_VIDEO, 0, &dev);
-	if (ret)
-		return ret;
-#endif
-
-	return 0;
-}
-
-U_BOOT_CMD(
-       bx50_backlight_enable, 1,      1,      do_backlight_enable,
-       "enable Bx50 backlight",
-       ""
-);
-
 int board_fit_config_name_match(const char *name)
 {
 	if (!vpd.is_read)
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index b19861c89cd609d03b43953360aea72c5d076b04..49df9f62616f19b1c3e2d7f2b7d41604fbf923d4 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -31,6 +31,7 @@ CONFIG_CMD_PCI=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_CLS=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
@@ -74,9 +75,11 @@ CONFIG_DM_PCI=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
 CONFIG_PWM_IMX=y
+CONFIG_DM_PWM=y
 CONFIG_DM_PMIC=y
 CONFIG_DM_PMIC_DA9063=y
 CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_DA9063=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_RX8010SJ=y
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index b9227fc2fee7cc8219b001114d03f4916a5bbd0c..46a3c3829413041c963b259c60093c573dc44bb7 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -105,7 +105,7 @@
 		"setexpr partnum 3 - ${partnum}\0" \
 	"failbootcmd=" \
 		"echo reached failbootcmd; " \
-		"bx50_backlight_enable; " \
+		"cls; " \
 		"setcurs 5 4; " \
 		"lcdputs \"Monitor failed to start. " \
 		"Try again, or contact GE Service for support.\"; " \