From b6e80e24857a273e6c5c89e74f5d6a918dd2563f Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Thu, 29 Mar 2012 02:22:50 +0000
Subject: [PATCH] mx6qsabrelite: Add boot switch setting information into the
 README

Add boot switch setting information into the README

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 doc/README.mx6qsabrelite | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/doc/README.mx6qsabrelite b/doc/README.mx6qsabrelite
index 0498cba8cc9..6f2f5343de2 100644
--- a/doc/README.mx6qsabrelite
+++ b/doc/README.mx6qsabrelite
@@ -31,7 +31,8 @@ Note: Replace sXx with the device representing the SD card in your system.
 Note: This writes SD card loader at address 0
 
 2. Put this SD card into the slot for the large SD card (SD3 on the bottom of
-the board)
+the board). Make sure SW1 switch is at position "00", so that it can boot
+from the fuses.
 
 3. Power-up the SabreLite, press 'space' to enter command mode in the U-Boot
 (the default one the board is shipped with, starting from the SPI NOR) and
-- 
GitLab