diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index 109a37be15ad3a5a2bcdb3ef69daa268ce75d805..9f3ad4f623b054765117c59372791b6976b94fa2 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -27,12 +27,12 @@ config TPL_MAX_SIZE
 config TPL_STACK
 	default 0xff0e4fff
 
-config DEBUG_UART2_CHANNEL
-	int "Mux channel to use for debug UART2"
+config DEBUG_UART_CHANNEL
+	int "Mux channel to use for debug UART2/UART3"
 	depends on DEBUG_UART_BOARD_INIT
 	default 0
 	help
-	  UART2 can use two different set of pins to route the output.
+	  UART2 and UART3 can use two different set of pins to route the output.
 	  For using the UART for early debugging the route to use needs
 	  to be declared (0 or 1).
 
diff --git a/arch/arm/mach-rockchip/px30/px30.c b/arch/arm/mach-rockchip/px30/px30.c
index bacdcc0b938d9960201d9530a7fbc04b9fb6d6f7..a2241cfc608de92d13271485cee4c53b3331b379 100644
--- a/arch/arm/mach-rockchip/px30/px30.c
+++ b/arch/arm/mach-rockchip/px30/px30.c
@@ -222,7 +222,7 @@ void board_debug_uart_init(void)
 		     UART2_CLK_SEL_MASK,
 		     UART2_CLK_SEL_UART2 << UART2_CLK_SEL_SHIFT);
 
-#if (CONFIG_DEBUG_UART2_CHANNEL == 1)
+#if (CONFIG_DEBUG_UART_CHANNEL == 1)
 	/* Enable early UART2 */
 	rk_clrsetreg(&grf->iofunc_con0,
 		     CON_IOMUX_UART2SEL_MASK,
@@ -241,7 +241,7 @@ void board_debug_uart_init(void)
 		     GPIO1D3_MASK | GPIO1D2_MASK,
 		     GPIO1D3_UART2_RXM0 << GPIO1D3_SHIFT |
 		     GPIO1D2_UART2_TXM0 << GPIO1D2_SHIFT);
-#endif /* CONFIG_DEBUG_UART2_CHANNEL == 1 */
+#endif /* CONFIG_DEBUG_UART_CHANNEL == 1 */
 
 #endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */
 }