mx25: Remove empty line after printing the reset cause

Currently there is an unneeded empty line after printing the reset cause:

U-Boot 2015.01-rc4-00080-g0551a93 (Jan 06 2015 - 13:04:19)

CPU:   Freescale i.MX25 rev1.2 at 399 MHz
Reset cause: POR

Board: MX25PDK
I2C:   ready
DRAM:  64 MiB
MMC:   FSL_SDHC: 0

Remove the extra "\n" when printing the reset cause.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>