Move default y configs out of arch/board Kconfig

Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.

Remove the configs that behave this way from the archs.

A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:

SPIFLASH
DISPLAY_BOARDINFO

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini <trini@konsulko.com>

arch/arc/Kconfig

@@ -4,9 +4,6 @@ menu "ARC architecture"
 config SYS_ARCH
 	default "arc"
 
-config USE_PRIVATE_LIBGCC
-	default y
-
 config SYS_CPU
 	default "arcv1" if ISA_ARCOMPACT
 	default "arcv2" if ISA_ARCV2

arch/arm/cpu/armv7/exynos/Kconfig

@@ -74,9 +74,6 @@ endchoice
 config SYS_SOC
 	default "exynos"
 
-config DM_USB
-	default y
-
 source "board/samsung/smdkv310/Kconfig"
 source "board/samsung/trats/Kconfig"
 source "board/samsung/universal_c210/Kconfig"

arch/arm/mach-bcm283x/Kconfig

@@ -15,9 +15,6 @@ config TARGET_RPI_2
 
 endchoice
 
-config PHYS_TO_BUS
-	default y
-
 config SYS_BOARD
 	default "rpi" if TARGET_RPI
 	default "rpi_2" if TARGET_RPI_2

arch/arm/mach-tegra/Kconfig

@@ -21,18 +21,6 @@ endchoice
 config SYS_MALLOC_F_LEN
 	default 0x1800
 
-config USE_PRIVATE_LIBGCC
-	default y
-
-config DM_USB
-	default y
-
-config SPL_DM
-	default y
-
-config SPL_DISABLE_OF_CONTROL
-	default y
-
 source "arch/arm/mach-tegra/tegra20/Kconfig"
 source "arch/arm/mach-tegra/tegra30/Kconfig"
 source "arch/arm/mach-tegra/tegra114/Kconfig"

arch/mips/Kconfig

@@ -8,9 +8,6 @@ config SYS_CPU
 	default "mips32" if CPU_MIPS32_R1 || CPU_MIPS32_R2
 	default "mips64" if CPU_MIPS64_R1 || CPU_MIPS64_R2
 
-config USE_PRIVATE_LIBGCC
-	default y
-
 choice
 	prompt "Target select"
 	optional

arch/sh/Kconfig

@@ -125,9 +125,6 @@ config SYS_CPU
 	default "sh3" if CPU_SH3
 	default "sh4" if CPU_SH4
 
-config USE_PRIVATE_LIBGCC
-	default y
-
 source "board/alphaproject/ap_sh4a_4a/Kconfig"
 source "board/espt/Kconfig"
 source "board/mpr2/Kconfig"

arch/x86/Kconfig

@@ -4,12 +4,6 @@ menu "x86 architecture"
 config SYS_ARCH
 	default "x86"
 
-config USE_PRIVATE_LIBGCC
-	default y
-
-config SYS_VSNPRINTF
-	default y
-
 choice
 	prompt "Mainboard vendor"
 	default VENDOR_EMULATION
@@ -335,13 +329,4 @@ config PCIE_ECAM_BASE
 	  assigned to PCI devices - i.e. the memory and prefetch regions, as
 	  passed to pci_set_region().
 
-config BOOTSTAGE
-	default y
-
-config BOOTSTAGE_REPORT
-	default y
-
-config CMD_BOOTSTAGE
-	default y
-
 endmenu

board/Arcturus/ucp1020/Kconfig

@@ -12,14 +12,6 @@ config SYS_CONFIG_NAME
 	string
 	default "UCP1020"
 
-config SPI_FLASH
-	bool
-	default y
-
-config SPI_PCI
-	bool
-	default y
-
 choice
 	prompt "Target image select"
 

board/sunxi/Kconfig

@@ -566,25 +566,4 @@ config GMAC_TX_DELAY
 	---help---
 	Set the GMAC Transmit Clock Delay Chain value.
 
-config SYS_MALLOC_CLEAR_ON_INIT
-	default n
-
-config NETDEVICES
-	default y
-
-config DM_ETH
-	default y
-
-config DM_SERIAL
-	default y
-
-config DM_USB
-	default y if !USB_MUSB_SUNXI
-
-config CMD_SETEXPR
-	default y
-
-config CMD_NET
-	default y
-
 endif

configs/A10-OLinuXino-Lime_defconfig

@@ -5,5 +5,13 @@ CONFIG_DRAM_CLK=480
 CONFIG_DRAM_EMR1=4
 CONFIG_SYS_CLK_FREQ=912000000
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A10s-OLinuXino-M_defconfig

@@ -7,5 +7,13 @@ CONFIG_MMC1_CD_PIN="PG13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A13-OLinuXinoM_defconfig

@@ -11,5 +11,13 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo
 CONFIG_VIDEO_LCD_POWER="PB10"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A13-OLinuXino_defconfig

@@ -12,5 +12,13 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A20-OLinuXino-Lime2_defconfig

@@ -6,6 +6,14 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_USB0_VBUS_PIN="PC17"
 CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A20-OLinuXino-Lime_defconfig

@@ -3,6 +3,14 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=480
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/A20-OLinuXino_MICRO_defconfig

@@ -7,6 +7,14 @@ CONFIG_MMC3_CD_PIN="PH11"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 CONFIG_VIDEO_VGA=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/Ainol_AW1_defconfig

@@ -13,5 +13,11 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y

configs/Ampe_A76_defconfig

@@ -12,5 +12,11 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y

configs/Auxtek-T004_defconfig

@@ -4,5 +4,13 @@ CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PG13"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_NET=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y

configs/B4420QDS_NAND_defconfig

@@ -5,3 +5,4 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
 CONFIG_CMD_SETEXPR=y
 CONFIG_CMD_NET=y
+CONFIG_SPI_FLASH=y