commit 262951(MMC: make b_max unconditional) missed to update fsl_esdhc.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

For emmc, it may have up to 7 partitions: two boot partitions, one
user partition, one RPMB partition and four general purpose partitions.
(Refer to JESD84-A44.pdf/page 154)

As bootloader may need to read out or reflashing images on those

different partitions, it is better to enable the partition switch with
console command support.

Also for partition would be restore to user partition(part 0) when CMD0
is used, so change mmc_init routine to perform normal initialization
only once for each slot, unless use the rescan command to force init
again.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>

mmc command applied device, like ide and usb...

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>

A "send status" command is added with the commit "mmc: checking
status after commands with R1b response". But the status register
returned from send status command of SPI protocol is different from
that of MMC/SD protocol. We do a simple test and generate a response
in stead of full bit-by-bit translation.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>

* 'master' of git://git.denx.de/u-boot-arm: (40 commits)
  avr32: add ATAG_BOARDINFO
  at91: reworked support for otc570 board
  at91: reworked support for meesc board
  hammerhead: move CONFIG_SYS_TEXT_BASE to header
  mimc200: move CONFIG_SYS_TEXT_BASE to header
  favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header
  atstk100x: move CONFIG_SYS_TEXT_BASE to header
  atngw100: move CONFIG_SYS_TEXT_BASE to header
  mimc200: fix "#define XXXX 1"
  hammerhead: fix "#define XXXX 1"
  favr-32-ezkit: fix "#define XXXX 1"
  atstk1006: fix "#define XXXX 1"
  atstk1004: fix "#define XXXX 1"
  atstk1003: fix "#define XXXX 1"
  atstk1002: fix "#define XXXX 1"
  atngw100: fix "#define XXXX 1"
  avr32: use single linker script
  avr32/config.mk: simplify PLATFORM_RELFLAGS
  avr32: fix linking
  Add support for Bluewater Systems Snapper 9260 and 9G20 modules
  ...

* 'master' of git://git.denx.de/u-boot-nand-flash:
  nand_spl: nand_boot.c: Remove last CONFIG_SYS_NAND_READ_DELAY occurance

This patch adds a new ATAG_BORADINFO to U-Boot. This tag is intended to hand
over the bd->bi_board_number to the linux kernel for early stage board
information like a board revision or other kind of board specific decisions
necessary before the linux peripherial drivers are up.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

The otc570 board support was broken. Within this opportunity, I completely
reworked the board files.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

The meesc board support was broken. Within this opportunity, I completely
reworked the board files.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

This patch move the atstk100x linker script to $(CPUDIR) and delete other
pure copies of this file in each board directory.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

This patch removes PLATFORM_RELFLAGS from board specific config.mk files and
define them in arch specific config.mk file.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

This patch fixes following error:

---8<---
avr32-linux-ld: --gc-sections and -r may not be used together
--->8---

Since 8aba9dce all avr32 boards are broken due
to linking error as seen above.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
single board computer modules. Includes NAND flash and Ethernet
support.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

* remove __attribute__ ((packed)) to prevent byte access
  to soc registers in some gcc version

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>

* use start/end label for initialization tables instead of fix values

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

and remove the now unused asm/arch-at91/io.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>