Minimally modified patch by Bluetechnix, Vienna

As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
of all unreleased (untagged) U-Boot images will be automatically
extended upon compiletime with a part of the GIT commit ID and
possibly with "dirty" if uncommited changes are detected.

Here an example for the resulting version:
"U-Boot 1.1.4-g3457ac18-dirty"

The version is now maintained in the toplevel Makefile and the
version headers are autogenerated.

Patch by Stefan Roese, 9 Feb 2006

Signed-off-by: Heiko Schocher <hs@denx.de>

Patch by Reinhard Arlt, 8 Feb 2006

Patch by Matthias Fuchs, 07 Feb 2006

To match the U-Boot user interface on ARM platforms to the U-Boot
standard (as on PPC platforms), some messages with debug character
are removed from the default U-Boot build.
Enable DEBUG for lib_arm/board.c to enable debug messages.
New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.

Patch  by Stefan Roese, 24 Jan 2006

Patch by Stefan Roese, 18 Jan 2006

Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().

Patch by Reinhard Arlt, 30 Dec 2005

PMC405 and CPCI2DP: Added firmware download and booting via pci.

Patch by Matthias Fuchs, 20 Dec 2005

(without bank-switching only 32 MB can be accessed)

Patch by Eugen Bigz, 19 Dec 2005

The default of 255 is too short for slow devices.
Patch by Martin Nykodym, 12 Dec 2005

- Changed GPIO setup to enable another address line in order to
  address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
  the DDR.
Patch by Steven Blakeslee, 12 Dec 2005

No commit message

Simplify TQM85xx Makefile handling.

With 64 kb uniform flash sector size the old value of 128 kB was
too small.

ethaddr is assigned). Initialization moved from miiphy_register() to
eth_initialize().

Based on initial patch for 4xx platform by Matthias Fuchs.

- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005

Patch by Stefan Roese, 29 Nov 2005

Patch by John Otken, 23 Nov 2005

Patch by Stefan Roese, 27 Nov 2005