This can be used for device tree size reduction similar as
CONFIG_OF_SPL_REMOVE_PROPS option. Some boards must pass the
built-in DTB unchanged to the kernel, thus we may not cut it
down unconditionally. Therefore enable the property removal
list option only if CONFIG_OF_DTB_PROPS_REMOVE is selected.

Signed-off-by: Anatolij Gustschin <agust@denx.de>

- Various clock fixes and enhancements

Since frac_pll_init() is only used in this file, change it to 'static'.

This fixes the following sparse warning:

arch/arm/mach-imx/imx8m/clock_imx8mq.c:662:5: warning: no previous
prototype for ‘frac_pll_init’ [-Wmissing-prototypes]

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>

Function sscg_pll_init() is not used anywhere, so it can simply be deleted.
This was found because of the following sparse
warning:

arch/arm/mach-imx/imx8m/clock_imx8mq.c:702:5: warning: no previous prototype for ‘sscg_pll_init’ [-Wmissing-prototypes]
 int sscg_pll_init(u32 pll)
     ^~~~~~~~~~~~~

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>

Since do_imx8m_showclocks() is only used inside this file, make it 'static'.

This fixes the following sparse warning:

arch/arm/mach-imx/imx8m/clock_imx8mq.c:836:5: warning: no previous prototype
 for ‘do_imx8m_showclocks’ [-Wmissing-prototypes]
 int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
     ^~~~~~~~~~~~~~~~~~~

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>

Function init_usb_clk() is not used anywhere, so it can simply be deleted.
This was detected by the following sparse warning:

arch/arm/mach-imx/imx8m/clock_imx8mq.c:377:6: warning: no previous prototype
 for ‘init_usb_clk’ [-Wmissing-prototypes]
 void init_usb_clk(void)
      ^~~~~~~~~~~~

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>

Guard 'parent_rate==0' to prevent 'divide by zero' issue in
clk_pplv3_av_set_rate(). If it is 0, let's return with -EINVAL.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>

Guard 'mfd==0' to prevent 'divide by zero' issue in
clk_pplv3_av_get_rate(). If it is 0, let's return with EIO since mfd
should never be 0 at all.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>

Guard 'parent_rate==0' to prevent 'divide by zero' issue in
clk_pplv3_sys_get_rate(). If it is 0, let's return with -EINVAL.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>

m68k needs block cache list initialized after relocation.
Other architectures must not be involved.

Fixing regression related to:

commit 1526bcce
	("common: add blkcache init")

Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>

This function parameter usage of load_addr was incorrectly caught in
the clarifying renames of commit bb872dd9, which results in boot
failures on Marvell A38x.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Patch-to: Simon Glass <sjg@chromium.org>

- Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai)
- Allwinner R40 Ethernet, usb phy enablement (Andre Przywara)
- Sunxi auto load from 128KB MMC offset (Andre Przywara)
- Orange Pi Win Ethernet phy enablement (Jernej Skrabec)

Orange Pi Win has gigabit ethernet port, but default U-Boot
configuration for that board enabled ethernet driver but
didn't enable realtek phy.

Fix that.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

Since commit 067e0b96 ("sunxi: Allow booting from 128KB SD/eMMC offset")
we support having the SPL loaded from either the traditional 8KB SD
card/eMMC offset, or from the alternative location at 128KB. However the
sector to find the U-Boot image was still hard-coded at compile time,
and had to be adjusted for one of the two choices.

Since we can actually override the function to return the sector offset,
we can just check the boot source byte there to select the proper offset
based on from where the SPL was loaded.

This allows the very same binary image to be loaded from either 128KB or
8KB, with the U-Boot proper image always being located just behind the SPL.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>

The Boot ROM write some boot source ID (SD card, eMMC, SPI, ...) into
a certain location in SRAM, so the SPL can easily determine where to
load U-Boot proper from.
Factor out reading this value, as it will come in handy again shortly.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>

dev_read_addr_ptr returns NULL on error, not FDT_ADDR_T_NONE.

Signed-off-by: Sean Anderson <seanga2@gmail.com>

This header was missing a couple of include dependencies when included on its
own.

Signed-off-by: Sean Anderson <seanga2@gmail.com>

clk_get_by_name() requires clk_get_by_id() that is not available if
CONFIG_OF_PLATDATA is defined, so move clk_get_by_name() into #else
condition of #if CONFIG_IS_ENABLED(OF_PLATDATA).

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>

It will ease debug when uclass_get_device_by_name failed with
more error info printed out.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

mtk_clk_find_parent_rate is calling clk_get_rate to know the rate
of a parent clock. clk_get_rate returns a ulong, while
mtk_clk_find_parent_rate returns an int. This implicit cast creates
an issue for clock rates big enough to need the full 32 bits to
store its data. When that happen the clk rate will become incorrect
because of the implicit cast between ulong -> int -> ulong.

This commit change the return type of mtk_clk_find_parent_rate to
ulong.

Signed-off-by: Fabien Parent <fparent@baylibre.com>

Updates and fixes for ls1028a, lx2160a, ls1012a, ls1021a, ls2080a,
ls1088a platforms:
- lx2-rev2 pcie support, enetc related updates, layerscape-pcie fixes

- Enable fastboot on some MediaTek platforms
- DMA enchancements
- Assorted bugfixes

This patch adds a prototype for the weak function
board_mtdparts_default().

It solves one warning when compiling with W=1 on stm32mp1 board:

board/st/stm32mp1/stm32mp1.c:
     warning: no previous prototype for 'board_mtdparts_default'
              [-Wmissing-prototypes]
     void board_mtdparts_default(const char **mtdids,
                                 const char **mtdparts)
          ^~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

The blkcache_read() routine returns 1 (true) to indicate that a block was
found in the cache and returned, or 0 if not.

Signed-off-by: Eric Nelson <eric@nelint.com>

There is a typo in meerkat96 MAINTAINERS email address.  Fix it.

Reported-by: Carl Gelfand <carl@novtech.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

genboardscfg.py requires python 3.x since commit 3bc14098
("genboardscfg.py: Convert to Python 3").

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>

On m68k, block_cache list is relocated, but next and prev list
pointers are not adjusted to the relocated struct list_head address,
so the first iteration over the block_cache list hangs.

This patch initializes the block_cache list after relocation.

Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Reviewed-by: Eric Nelson <eric@nelint.com>

Now that arch specific dma mapping APIs take care of cache
flush/invalidate, drop local cache flush operation.
While at that fix dma_unmap_single() call to match new prototype

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Drop local dma_map_single() and dma_unmap_single() and use arch specific
common implementation

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Drop local dma_map_single() and dma_unmap_single() and use arch specific
common implementation

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Subsystems such as USB expect dma_map_single() and dma_unmap_single() to
do dcache flush/invalidate operations as required. For example, see
see drivers/usb/gadget/udc/udc-core.c::usb_gadget_map_request().
Currently drivers do this locally, (see drivers/usb/dwc3/ep0.c,
drivers/mtd/nand/raw/denali.c etc..)
Update arch specific dma_map_single() and dma_unmap_single() APIs to do
cache flush/invalidate  operations, so that drivers need not implement
them locally.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Rick Chen <rick@andestech.com>

This patch includes the following:
1. Add fastboot command to erase the whole EMMC_USER
2. Add fastboot command to flash image at EMMC_BOOT1
3. Add fastboot command to erase the whole EMMC_BOOT1
4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518

Signed-off-by: mingming lee <mingming.lee@mediatek.com>

Enable EFI module.
Enable fastboot.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>

Enable board_late_init and usb gadget for mt8518

Signed-off-by: mingming lee <mingming.lee@mediatek.com>

set common fastboot variables for mt8518

Signed-off-by: mingming lee <mingming.lee@mediatek.com>

Add board_late_init function to init usb gadget driver for mt8518

Signed-off-by: mingming lee <mingming.lee@mediatek.com>

Using musb-new structure for mt85xx gadget driver.
Add gadget driver dts for mt8518 SoCs.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>

Function mod_exp_sw() is only used via the operators of the uclass.
It is not defined in any include.

Make mod_exp_sw() static.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

drivers/rng/sandbox_rng.c requires rand() to be defined but configuration
option CONFIG_CONFIG_LIB_RAND selected in drivers/rng/Kconfig does not
exist.

test/lib/test_aes.c requires rand() to be defined.

Fix the selection criteria for choice "Pseudo-random library support type".

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

CONFIG_SPL_RSA is meant to control if lib/rsa/* is used for SPL. Adjust
lib/Makefile to consider this setting.

This was correctly setup with commit 51c14cd1 ("verified-boot: Minimal
support for booting U-Boot proper from SPL") and got lost with commit
089df18b ("lib: move hash CONFIG options to Kconfig").

Fixes: 089df18b ("lib: move hash CONFIG options to Kconfig")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>