This change lays the groundwork for the BOOTFLAG_* flags being removed.

This change has the small affect of delaying 100ms on PCI initialization
after a warm boot as opposed to the optimal 1ms on some boards.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

included the mpc8308_p1m board.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

continuation of commit 39da1ba923d55f316f9f1bb3a960e4ed91dc17ac:
"e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels"

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Configuring for MPC8308RDB board...
pcie.c: In function 'mpc83xx_pcie_register_hose':
pcie.c:143: warning: assignment makes pointer from integer without a cast

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

This patch provides support for MPC8308 P1M board with the following
set of features:
 Dual UART is supported
 NOR flash is supported
 Both TSEC Ethernet controllers are supported
 PCI Express initialization is supported
 Both I2C controllers are supported

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

This patch cleans up the Freescale MPC8308RDB Development board support.
Things fixed:
 - Removed unused PCIE2 definitions from configuration
 - SICR{L,H} defines used for System I/O Configuration Registers values
   instead of hardcoding
 - CONFIG_SYS_SCCR_PCIEXP1CM used to enable PCIE clock instead of
   writing to SCCR from the board code
 - sleep mode stuff removed as MPC8308 has no support for deep sleep and
   PMCCR1 register. board_early_init_f() removed.
 - MPC8308 has no ERRATA for DDR controller so workaround removed
 - 'assignment in if statement' issues solved
 - use LBLAWAR_* defines instead of hardcoding

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

This patch adds defines to set supported fields in System I/O
Configuration Registers High and Low on Freescale MPC8308 CPU.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

This patch adds support for setting PCIE clocks in cpu_init.c by
providing CONFIG_SYS_SCCR_PCIEXP{1,2} in configuration.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

MPC8308 has only one PCIE host controller so we want it to compile
without CONFIG_SYS_PCIE2_CFG_{BASE,SIZE} defined.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Newer Linux kernels can overrun the initial memory window used for
booting with their BSS area. When this happens, they overwrite the FDT
and silently fail to boot.

On e300 CPUs, the Linux kernel uses an initial BAT covering the first
256MB of RAM. See arch/powerpc/kernel/head_32.S for details. Increase
the value of CONFIG_SYS_BOOTMAPSZ to accommodate the maximum value
allowed by Linux. This will allow very large kernels to boot.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

The default partition table matches the .dts files for these boards in
Linux.  This allows these partitions to be used by name with U-Boot's
"nand" command.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

By default the trace broadcast is enabled on 44x systems.

To reduce power consumption when instruction tracing is
not needed, disable trace broadcast.

Check External Debug Mode (EDM) bit to detect if it should be
disabled or not.

Resetting system via a debugger will set the DBCR0[EDM] bit.
Resetting via u-boot or OS will not.

Signed-off-by: Victor Gallardo <vgallardo@apm.com>
Signed-off-by: Stefan Roese <sr@denx.de>

This patch cleans the PVR detection code in check_cpu() up a bit.
Basically the strings are better seperated, resulting in an easier
to understand and maintain code version.

The #ifdef's couldn't be removed easily because of two reasons:

- Some SoC revisions have the same PVR, so need a way to differentiate
  between those two SoC's.
- In some case statements registers only available in this SoC variant
  are referenced.

Instead I moved the CONFIG_440 #ifdef a bit, so that 405 platforms don't
add this 440 detection code and vice versa. Resulting in this U-Boot
image size change:

405EX (Kilauea):     408 bytes less
440EPx (Sequoia):    604 bytes less
460EX (Canyonlands): 564 bytes less

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>

Remove some unused functionality to make U-Boot build again.
Especially PCI is not used on the board.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

This patch removes the completely unused CONFIG_SERIAL_SOFTWARE_FIFO
feature from U-Boot. It has only been implemented for PPC4xx and was not
used at all. So let's remove it and make the code smaller and cleaner.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

CONFIG_UART1_CONSOLE was a PPC4xx specific implementation and is now
removed since the move from the 4xx UART driver to the common NS16550
UART driver. Let's remove all references to this define now.

Signed-off-by: Stefan Roese <sr@denx.de>

This patch removes the PPC4xx UART driver. Instead the common NS16550
driver is used, since all PPC4xx SoC's use this peripheral device.

The file 4xx_uart.c now only implements the UART clock calculation
function which also sets the SoC internal UART divisors.

All PPC4xx board config headers are changed to use this common NS16550
driver now.

Tested on these boards:
acadia, canyonlands, katmai, kilauea, sequoia, zeus

Signed-off-by: Stefan Roese <sr@denx.de>

This cleanup is done by creating header files for all SoC versions and
moving the SoC specific defines into these special headers. This way the
common header ppc405.h and ppc440.h can be cleaned up finally.

As a part from this cleanup, the GPIO definitions for PPC405EP are
corrected. The high and low parts of the registers (for example
CONFIG_SYS_GPIO0_OSRL vs. CONFIG_SYS_GPIO0_OSRH) have been defined in
the wrong order. This patch now fixes this issue by switching these
xxxH and xxxL values. This brings the GPIO 405EP port in sync with all
other PPC4xx ports.

Signed-off-by: Stefan Roese <sr@denx.de>

This patch starts a bit PPC4xx header cleanup. First patch mostly
touches PPC440 files. A later patch will touch the PPC405 files as well.

This cleanup is done by creating header files for all SoC versions and
moving the SoC specific defines into these special headers. This way the
common header ppc405.h and ppc440.h can be cleaned up finally.

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Stefan Roese <sr@denx.de>

This patch moves some ppc4xx related headers from the common include
directory (include/) to the powerpc specific one
(arch/powerpc/include/asm/). This way to common include directory is not
so cluttered with files.

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Stefan Roese <sr@denx.de>

The Freescale MPC8610 and MPC5121 DIU code had re-implement two features that already
existed in U-Boot: bitmap drawing and top-of-screen logo (CONFIG_VIDEO_LOGO).
So delete the 8610-specific code and use the built-in features instead.

Signed-off-by: Timur Tabi <timur@freescale.com>

Add support for 4bpp bitmaps, currently only for GDF_32BIT_X888RGB
frame buffer format.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

Add the Freescale logo and update the Makefile to build it when building
a Freescale board.

Signed-off-by: Timur Tabi <timur@freescale.com>

[u-boot next]$ ./MAKEALL 83xx
awk '(NF && $1 !~ /^#/) { print $1 ": " $1 "_config; $(MAKE)" }' boards.cfg > .boards.depend
Configuring for ve8313 board...

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

This patch modifies jadecpu board so that it is usable
with the relocation patches by Heiko Schocher

Signed-off-by: Matthias Weisser <weisserm@arcor.de>

Fixes most of checkpatch warnings and errors in USB gadget stack.

The most frequently encountered problems are:
1) "(foo*)", "foo * bar", "foo* bar"
2) C99 // comments
3) No spaces before/after/around '?', ':', '=', '==', ',', '&', '('
4) Spaces before '['
5) Spaces between function names and '('
6) Block braces in wrong places
7) Spaces before tabs
8) Macros with complex values not enclosed in parenthesis
9) Multiline comments start just after /*

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

The patch removes an endless loop  in the usb_eth_send
if the tx_complete is not called before going
in the loop. The driver interrupt routine is called
allowing the driver to check if the TX is completed.

Signed-off-by: Stefano Babic <sbabic@denx.de>

The buffer for the status request must be word aligned
because it is accessed with 32 bit pointer in the
eth_status_complete function.

Signed-off-by: Stefano Babic <sbabic@denx.de>

The patch is based on commit bb9496c6f7e853e5d4edd5397c9d45f1968d623c
(done by Julia Lawall <julia@diku.dk>) from linux-2.6.git.

Since num is unsigned, it would seem better to use simple_strtoul that
simple_strtol.

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

Fix potential oops on rare error path.
The patch is based on commit e7b13ec9235b9fded90f826ceeb8c34548631351
(done by David Brownell <david-b@pacbell.net>) from linux-2.6.git.

Description of the issue taken from linux kernel bugzilla:
(https://bugzilla.kernel.org/show_bug.cgi?id=9594

)

The potential error can be tracked down as follows:

(1) line 807: let the second conjunct on the "if" statment be false
    meaning "dev->status_ep" is null. This means the "if" evaluates
    to false.

follow thru the code until...

(2) line 808: usb_ep_disable(dev->status_ep) passes in a null argument,
    however "usb_ep_disable" cannot handle that:

(from include/linux/usb/gadget.h)
191 static inline int
192 usb_ep_disable (struct usb_ep *ep)
193 {
194         return ep->ops->disable (ep);
195 }

--

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

Fix possible oops on stat_req->buf initialization and fix ep0 and
status_ep confusion (last one is just intended for stat_req keeping).

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>

Replace 'strcpy' by more safe 'strlcpy' that is implemented in ether.c

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

Fix in_ep and out_ep confusion (rx_req was allocated from out_ep, not
from in_ep) and add lost dev->req freeing.

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

Replace Linux-like debug printout macros by native ones.

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

Applied after removing dead code like '#define DEBUG/#undef DEBUG'

Add lost 'qmult' definition for High Speed devices and make it
configurable through CONFIG_USB_ETH_QMULT.

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

Prohibit simultaneous usage of both old and new gadget stacks and
allow UDC drivers to be dependent on CONFIG_USB_ETHER.

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>