- Jun 26, 2013
-
-
Hung-ying Tyan authored
This patch adds the driver for keyboard that's controlled by ChromeOS EC. Signed-off-by:
Randall Spangler <rspangler@chromium.org> Signed-off-by:
Simon Glass <sjg@chromium.org> Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Signed-off-by:
Hung-ying Tyan <tyanh@chromium.org> Acked-by:
-
Hung-ying Tyan authored
This patch adds LPC support for carrying out the cros_ec protocol. Signed-off-by:
-
Hung-ying Tyan authored
This patch adds SPI support for carrying out the cros_ec protocol. Signed-off-by:
-
Hung-ying Tyan authored
This patch adds I2C support for carrying out the cros_ec protocol. Signed-off-by:
-
Hung-ying Tyan authored
This patch adds the cros_ec driver that implements the protocol for communicating with Google's ChromeOS embedded controller. Signed-off-by:
Bernie Thompson <bhthompson@chromium.org> Signed-off-by:
Bill Richardson <wfrichar@chromium.org> Signed-off-by:
Che-Liang Chiou <clchiou@chromium.org> Signed-off-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Gabe Black <gabeblack@chromium.org> Signed-off-by:
Louis Yung-Chieh Lo <yjlou@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
- Jun 25, 2013
-
-
git://git.denx.de/u-boot-netTom Rini authored
-
Heiko Schocher authored
add atheros ar803x phy, used on the upcoming siemens boards. Signed-off-by:Heiko Schocher <hs@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
-
Heiko Schocher authored
add natsemi dp83630 phy, used on the upcoming siemens boards. Signed-off-by: -
Kuo-Jung Su authored
Signed-off-by:Kuo-Jung Su <dantesu@faraday-tech.com> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Tom Rini <trini@ti.com>
-
Kuo-Jung Su authored
Faraday FTMAC110 10/100Mbps supports half-word data transfer for Linux. However it has a weird DMA alignment issue: (1) Tx DMA Buffer Address: 1 bytes aligned: Invalid 2 bytes aligned: O.K 4 bytes aligned: O.K (2) Rx DMA Buffer Address: 1 bytes aligned: Invalid 2 bytes aligned: O.K 4 bytes aligned: Invalid!!! Signed-off-by: -
SARTRE Leo authored
Add function ksz9031_phy_extended_write and ksz9031_phy_extended_read Signed-off-by:Leo Sartre <lsartre@adeneo-embedded.com>
-
Bo Shen authored
Add gigabit MAC support in macb driver - using IP version to distinguish whether MAC is GMAC Signed-off-by:Bo Shen <voice.shen@atmel.com>
-
Bo Shen authored
using phylib to configure phy device in macb driver Signed-off-by: -
Bo Shen authored
Using CONFIG_AT91FAMILY replace #ifdeferry for atmel SoC Signed-off-by:
Andreas Bießmann <andreas.devel@googlemail.com>
-
Bo Shen authored
add network support with ksz8851_16mll on at91sam9n12ek board Signed-off-by:
-
Roberto Cerati authored
The device interface is 16 bits wide. All the available packets are read from the incoming fifo. Signed-off-by:
Roberto Cerati <roberto.cerati@bticino.it> Signed-off-by:
Raffaele Recalcati <raffaele.recalcati@bticino.it> [voice.shen@atmel.com: address comments from review results] [voice.shen@atmel.com: clean up for submit] Signed-off-by:
-
Xie Xiaobo authored
Signed-off-by:Xie Xiaobo <X.Xie@freescale.com>
-
Charles Coldwell authored
commit 39695029bc15041c809df3db4ba19bd729c447fa Author: Charles Coldwell <coldwell@ll.mit.edu> Date: Tue Feb 19 08:27:33 2013 -0500 Changes to support the Xilinx 1000BASE-X phy (GTX/MGT) Signed-off-by:Charles Coldwell <coldwell@ll.mit.edu>
-
Joe Hershberger authored
Make the link-local code conform more completely with the RFC. This will prevent ARP queries for the target (such as while it is rebooting) from causing the device to choose a different link-local address, thinking that its address is in use by another machine. Signed-off-by:Joe Hershberger <joe.hershberger@ni.com>
-
David Andrey authored
Add support for Micrel PHY KSZ9031 in phylib, including small rework for KSZ9021 to avoid code duplication Signed-off-by:
David Andrey <david.andrey@netmodule.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Joe Herschberger <joe.hershberger@gmail.com> Cc: Andy Fleming <afleming@freescale.com> Acked-by:
Stefan Roese <sr@denx.de>
-
Kim Phillips authored
tftp.c:464:17: warning: cast to restricted __be16 tftp.c:552:29: warning: cast to restricted __be16 tftp.c:640:33: warning: cast to restricted __be16 tftp.c:642:25: warning: cast to restricted __be16 Signed-off-by:Kim Phillips <kim.phillips@freescale.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
-
Kim Phillips authored
for use with sparse. Signed-off-by: -
Joe Hershberger authored
The added weak symbol must not be static. This was introduced in 416ce623 Signed-off-by:
-
Shiraz Hashim authored
SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control their respective phys. Currently there is a fixed configuration in which only a particular MAC can use the MDIO lines. Call an arch specific function to take control of specific mdio lines at runtime. Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by:
Vipin Kumar <vipin.kumar@st.com> Acked-by:
-
Vipin Kumar authored
Do not select MIIPORT for RGMII interface Signed-off-by:
-
Matthias Brugger authored
This patch tackles the time out problem which leads to break the boot process, when loading file over nfs. The patch does two things. First of all, we just ignore messages that arrive with a rpc_id smaller then the client id. We just interpret this messages as answers to formaly timed out messages. Second, when a time out occurs we double the time to wait, so that we do not stress the server resending the last message. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Tested-by:
Enric Balletbo i Serra <eballetbo@gmail.com>
-
Sebastian Hesselbarth authored
Marvell Dove also uses mvgbe as ethernet driver, therefore add support for Dove to reuse the current driver. Signed-off-by:Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-
Sebastian Hesselbarth authored
This add phylib support to the Marvell GBE driver. Signed-off-by: -
Sebastian Hesselbarth authored
This adds PHY initialization for Marvell Alaska 88E1310 PHY. Signed-off-by: -
Rob Herring authored
Add ipappend support to pass network device information to the kernel. Signed-off-by:Rob Herring <rob.herring@calxeda.com>
-
Joe Hershberger authored
Not all boards define an SOC. As a result, we can't depend on that. This was introduced in 39f98553 Signed-off-by:
-
Rob Herring authored
A pxelinux server setup for "default" menu is typically an x86 binary. This does not work well with a mixed architecture setup. Extend the default search to look for default-<arch>-<soc> and then default-<arch> before falling back to just "default". Signed-off-by: -
Rob Herring authored
ontimeout is similar to default, but is the selection on menu timeout. This is how cobbler sets a default. The label default is supposed to be the default selection when <enter> is pressed. If both default and ontimeout are set, last one parsed wins. Signed-off-by: -
Rob Herring authored
Menus with lots of entries and long append lines are hard to read. Just show a numbered list using the label or name and make the choice by entering the number. Signed-off-by: -
Rob Herring authored
The prompt flag is for displaying a "boot:" prompt in pxelinux. This doesn't make sense for u-boot as we don't support the pxelinux command interface. So we should just ignore prompt statements and always show the menu if a menu is present. Signed-off-by: -
Rob Herring authored
Standard pxelinux servers will typically use a zImage rather than u-boot image format, so fallback to bootz if bootm fails. Signed-off-by: -
Rob Herring authored
Make do_bootz available for other functions like do_bootm is. Signed-off-by: -
Rob Herring authored
Add support for value of -1 For localboot. A value of -1 means return to u-boot prompt. The localboot value is often 0, so we need to distinguish the value from localboot being selected. A value of greater than or equal to 0 means attempt local boot command. If localboot is selected, we don't want to try other entries. Signed-off-by: -
Rob Herring authored
Convert a bunch of string parameters to be const. Signed-off-by: -
Rob Herring authored
Get the MAC address using eth_getenv_enetaddr_by_index so that the MAC address of ethact is used. This enables using the a NIC other than the first one for PXE boot. Signed-off-by:
-
