and make some minor corrections to the FDT part of the README.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>

Implemented IETF RFC2090, Multicast TFTP.  Initial implementation
on Realtek RTL8139 and Freescale TSEC.

Signed-off-by: David Updegraff <dave@cray.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>

Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
from the bootp server

Signed-off-by: Wilson Callan <wcallan@savantav.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

All of the choices for CONFIG_BOOTP_ are now documented in
the README file.  You must now individually select exactly
the set that you want using a series of
    #define CONFIG_BOOTP_<x>
statements in the board port config files now.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

Signed-off-by: Jon Loeliger <jdl@freescale.com>

                - Show on the Status LEDs, some States of the board.
                - Get the MAC addresses from the EEProm
                - use PREBOOT
                - use the CF on the board.
                - check the U-Boot image in the Flash with a SHA1
                  checksum.
                - use dynamic TLB entries generation for the SDRAM

Signed-off-by: Heiko Schocher <hs@denx.de>

Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
drivers/serial,  immap_5329.h, m5329.h, mcfrtc.h,
include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
rtc/mcfrtc.c

Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
lib_m68k/time.c, net/eth.c and rtc/Makefile

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

This patch adds USB event poll support, which could be used in usbkbd
and other usb devices driver when the asynchronous interrupt
processing is supported.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>

Modifications to the existing code to support the new fdt command.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>

This patch switches to the desired I2C bus when the date/dtt
commands are called. This can be configured using the
CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.

Signed-off-by: Stefan Roese <sr@denx.de>

Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
Added multiple I2C bus support to fsl_i2c.c.

Signed-off-by: Timur Tabi <timur@freescale.com>

PREREQUISITE PATCHES:

* This patch can only be applied after the following patches have been applied:

  1) DNX#2006090742000024 "Add support for multiple I2C buses"
  2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
  3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
  4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
  5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"

CHANGELOG:

* Add support for the Freescale MPC8349E-mITX reference design platform.
  The second TSEC (Vitesse 7385 switch) is not supported at this time.

Signed-off-by: Timur Tabi <timur@freescale.com>

Hello,

Attached is a patch providing support for multiple I2C buses at the
command level.  The second part of the patch includes an implementation
for the MPC834x CPU and MPC8349EMDS board.

/*** Note: This patch replaces ticket DNX#2006083042000018 ***/

Signed-off-by: Ben Warren <bwarren@qstreams.com>

Overview:

1. Include new 'i2c' command (based on USB implementation) using
CONFIG_I2C_CMD_TREE.

2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS.  Note that
the commands to change bus number and speed are only available under the
new 'i2c' command mentioned in the first bullet.

3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
systems.  When CONFIG_I2C_MULTI_BUS is used, this option takes the form
of an array of bus-device pairs.  Otherwise, it is an array of uchar.

CHANGELOG:
        Added new 'i2c' master command for all I2C interaction.  This is
conditionally compiled with CONFIG_I2C_CMD_TREE.  New commands added for
setting I2C bus speed as well as changing the active bus if the board
has more than one (conditionally compiled with
CONFIG_I2C_MULTI_BUS).  Updated NOPROBE logic to handle multiple buses.
Updated README.

regards,
Ben

1. Add 7447A and 7448 processor support.
2. Add the following flags.

CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
(such as by switch on board), this flag should be set.

CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
relocates to RAM, this flag should be set.

CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
system hang in exception, this flag should be set.

There is a design issue for tsi108/109 pci configure  read. When pci scan
the slots, if there is no pci card, the tsi108/9 will cause a machine
check exception for mpc7448 processor.

Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

Patch by Haavard Skinnemoen, 06 Sep 2006

This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
daughterboard.

ATSTK1000 is a full-featured development board for AT32AP CPUs. It
has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
CompactFlash cards. For more information, please see this page:

http://www.atmel.com/dyn/products/tools.asp?family_id=682



The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
AT32AP7000 chip.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Patch by Haavard Skinnemoen, 06 Sep 2006

This patch adds support for the AT32AP CPU family and the AT32AP7000
chip, which is the first chip implementing the AVR32 architecture.

The AT32AP CPU core is a high-performance implementation featuring a
7-stage pipeline, separate instruction- and data caches, and a MMU.
For more information, please see the "AVR32 AP Technical Reference":

http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf

In addition to this, the AT32AP7000 chip comes with a large set of
integrated peripherals, many of which are shared with the AT91 series
of ARM-based microcontrollers from Atmel. Full data sheet is
available here:

http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf



Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200

This patch adds common infrastructure code for the Atmel AVR32
architecture. See doc/README.AVR32 for details.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

the README file.

coding style.

* Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006

  Patch by Matthew McClintock 26-June-2006

- Add support for mpc8xx USB device.
- Add support for Common Device Class - Abstract Control Model USB console.
- Add support for flow control in USB slave devices.
- Add support for switching between gserial and cdc_acm using environment.
- Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
- Update usbcore slightly to ease host enumeration.
- Fix non-portable endian problems in usbdcore and usbdcore_ep0.
- Add AdderUSB_config as a defconfig to enable usage of the USB console
  by default with the Adder87x U-Boot port.
Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006

  Patch by Scott McNutt, 08 Jun 2006

Patch from David Snowdon, 13. Aug 2005

Patch from Scott McNutt, 11 Aug 2005