Sync the hifive-unleashed-a00 dts from Linux with
below commit details:

commit <2993c9b04e616df0848b655d7202a707a70fc876> ("riscv: dts: HiFive
Unleashed: add default chosen/stdout-path")

Idea is to periodically sync the dts from Linux instead of
tweaking internal changes one after another, so better not
add any intermediate changes in between. This would help to
maintain the dts files easy and meaningful since we are
reusing device tree files from Linux.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

This fixes a problem, where booting Linux using distro boot will
sometimes lead to an invalid instruction exception on the main hart. The
secondary harts are not affected and boot Linux successfully. The root
cause of this problem is a stack overflow on the main hart.

With distro boot, the current default stack size of 8KiB on RISC-V is
not sufficient and will cause a stack overflow. The stacks are allocated
sequentially. In the case of a stack overflow the stack of the main hart
can reach into that of another hart and be corrupted.

The stack overflow previously did not cause any problems, because only
stack frames, which are not used anymore since the hart enters Linux,
were corrupted. Starting with GCC 9, the stack usage has decreased. Now,
only the most recent stack frame overflows into the stack of a secondary
hart and is corrupted. The illegal instruction exception is caused by
the secondary hart overwriting the return address in the stack frame of
the main hart with an address that does not include valid code.

Increase the default stack size of each hart to 16KiB to avoid this
problem.

Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Tested-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Rick Chen <rick@andestech.com>

In GCC 9 support for the Armv5 and Armv5E architectures (which have no
known implementations) has been removed, cf.
https://gcc.gnu.org/gcc-9/changes.html



Commit 16540d07 ("arm: fix -march for ARM11") changed the value of the
compiler flag from -march=armv5 and -march=armv5t into -march=armv6 for
ARM11.

The values prior to this patch were:

    arch-$(CONFIG_CPU_ARM1136)     =-march=armv5
    arch-$(CONFIG_CPU_ARM1176)     =-march=armv5t

The change lead to a regression with the Raspberry Pi Zero W not booting
anymore.

Use -march=armv5t both for ARM1136 and ARM1176.

Fixes: 16540d07 ("arm: fix -march for ARM11")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Joris Offouga <offougajoris@gmail.com>

unsigned char should be called uchar and not unchar.

This fixes a build error in lib/crypto/x509_cert_parser.c.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Fixes for 2020.01
-----------------

- imx8qxp_mek: increase buffer sizes and args number
- Fixes for imx7ulp
- imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
- colibri_imx7: reserve DDR memory for Cortex-M4
- vining2000: fixes and convert to ethernet DM
- imx8m: fix rom version check to unbreak some B0 chips
- tbs2910: Disable VxWorks image booting support

Recently the version check was improved to be able to determine that
we're running on SoC revision 2.1.  A check for B0 was tightened so
that it now must equal 0x20 instead of being bigger than 0x20.  On
some B0 chips the value returned is 0x1020 instead of 0x20.  This
means even though it's B0, the check will fail and code relying on
the correct chip revision will make wrong decisions.  There is no
documentation of those bits, but it seems that NXP always uses a
byte to encode the revision.  Thus remove the upper bits to fix the
regression.

Signed-off-by: Patrick Wildt <patrick@blueri.se>

- 16-bit start up codes clean up

You can directly specify the label as the operand for ljmp.

This commit saves 4-byte code.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fixed the gas warning]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

This file defines 'a32' and 'o32' macros to avoid magic numbers
of operand/address-size prefixing.

GAS supports 'data32' and 'addr32' for that purpose.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

- Allow for the sysboot command, which is used to parse extlinux.conf
  files to be used without PXE support.  There is no functional change
  here aside from fixing distro boot in a few cases where we actually
  lacked the ability to parse the extlinux.conf file
- Add the x509/pkcs7 parsers from Linux, a pre-requisite to EFI Secure
  Boot support.

With the change to make tools/version.h a file we need to make sure that
the output directory exists first otherwise we will get a build failure.

Reported-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Fixes: 4d90f6cd ("tools: Avoid creating symbolic links for tools/version.h")
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

This test will exercise asn1 compiler as well as asn1 decoder functions
via various parsers.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Imported from linux kernel v5.3:
 pkcs7.asn1 without changes
 pkcs7.h with changes marked as __UBOOT__
 pkcs7_parser.h without changes
 pkcs7_parser.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Imported from linux kernel v5.3:
 x509.asn1 without changes
 x509_akid.asn1 without changes
 x509_parser.h without changes
 x509_cert_parser.c with changes marked as __UBOOT__
 x509_public_key.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Imported from linux kernel v5.3:
rsapubkey.asn1 without changes
rsa.h without changes
rsa_helper.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Imported from linux kernel v5.3:
 asymmetric-type.h with changes marked as __UBOOT__
 asymmetric_type.c with changes marked as __UBOOT__
 public_key.h with changes marked as __UBOOT__
 public_key.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Imported from linux kernel v5.3:
 build_OID_registry without changes
 oid_registry.h without changes
 oid_registry.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

This document gives a brief description about ASN1 compiler as well as
ASN1 decoder.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Imported from linux kernel v5.3:
 lib/asn1_decoder.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

This rule will be used to build x509 and pkcs7 parsers.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Imported from linux kernel v5.3:
 asn1.h without changes
 asn1_ber_bytecode.h without changes
 asn1_decoder.h without changes
 asn1_compiler.c without changes

This host command will be used to create a ASN1 parser, for example,
for pkcs7 messages or x509 certificates. More specifically, it will
generate *byte code* which will be interpreted by asn1 decoder library.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Without this commit, time.h possibly causes a build error as
asctime_r() uses sprintf().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Adding "printk.h" will help improve portability from linux kernel
code (in my case, lib/asn1_decoder.c and others) where printf and
pr_* variant functions are used.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

This function will be used  in lib/crypto/x509_cert_parser.c, which
will also be imported from linux code in a later commit.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

In the next commit, rtc_mktime(), for compatibility with linux, will be
implemented using rtc_mktime(), which is no longer drivers/rtc specific.
So move this file under lib/.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Without this change, including rtc.h solely will cause a build error.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

linux_compat.c is the best place for kmemdup(), which is currenly used
only in ubifs.c, but will also be used when other kernel files
(in my case, lib/crypto/x509_cert_parser.c and pkcs7_parser.c) will be
imported. So just move it.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Fix checkpatch WARNING and CHECK issues

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Fix checkpatch WARNING and CHECK issues

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Fix checkpatch WARNING and CHECK issues

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Extract all sysboot command related code from pxe.c to new sysboot.c
Update Kconfig to insure that DISTRO_DEFAULT select new CMD_SYSBOOT
command.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

As sysboot and pxe commands are sharing piece of code, migrate this
common code into a new file pxe_utils.c to prepare sysboot command
code extraction from pxe.c

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Migrate from_env() from pxe.c to nvedit.c as it's not pxe specific.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

- rockchip pwm driver update to support all the SoCs
- RK3308 GMAC and pinctrl support
- More UART interface support on PX30 and pmugrf reg fix
- Fixup on misc for eth_addr/serial#
- Other updates on variant SoCs

Due to the (seemingly bogus) assumption of a default
CONFIG_SYS_UBOOT_START value we will revert this change for now and
evaluate it again for the next release along with changes to
CONFIG_SYS_UBOOT_START.

This reverts commit d3e97b53.

Signed-off-by: Tom Rini <trini@konsulko.com>

The default value of CONFIG_SYS_CBSIZE is too small when we need
to input long commands or when using long kernel command line.

The default value of CONFIG_SYS_MAXARGS is too small to add a long
command line, and the kernel might not boot as intended without the
complete bootargs. Increase argument buffer sizes and the number of
arguments.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

The 24MHz oscillator clock is referenced by "clock-osc-24m" and not
"osc_24m".

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same
PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>

Ever since the conversion to DM PCI, the board was missing the PCIe DT
nodes, hence the PCI did not really work. Fill in the DT nodes and add
missing PCIe device reset.

Moreover, bring the PCIe power domain up before booting Linux. This is
mandatory to keep old broken vendor kernels working, as they do not do
so and depend on the bootloader to bring the power domain up.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>

The fitImage support was enabled in the downstream U-Boot port and the
kernel images on the device are fitImage, yet this functionality is not
enabled in mainline U-Boot. Enable it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>