Reword "The DIMM max tCKmin is ..." to "The DDR clock is faster than the slowest
DIMM(s) can support". Fixed interger type in printf as well.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

The compatible property for the L2 cache node (on 85xx systems that don't
have a CPC) was using a value for the property length that did not match
the actual length of the property.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

calc_hdrcsum two times are checked. checksumi of exthdr is not checked.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
CC: Prafulla Wadaskar <prafulla@marvell.com>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Fix some missing declaration in header.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

Add missing definitions in header file according to datasheet.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

Un-nestted the register structure in ftsmc020.h

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

Avoid relocation problem by fix global declaration.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

Faraday's ftide020_s is an IDE-AHB controller for SoC design.
This patch add the u-boot driver (PIO) of ftide020 ATA (IDE) driver.
IDE commands include read, info, and other functions has been implemented.

Because this IDE controller support AHB interface only which is differ
from other most IDE controller supports PCI interface. Some registers
access is required during CMD/DATA I/O. Hence a configuration
"CONFIG_IDE_AHB" is required to be defined according to the feature in
cmd_ide.c.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

When your emulator is connected at reset (or is used to load u-boot)
it is possible to get the relocation address from the gd->relocaddr
since gd is always in r8 (on ARM) it is addressable before the
gdb has remapped symbols.

Document this alternate method in-line with the original method
written by Heiko Schocher.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Heiko Schocher <hs@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>

The bdinfo command prints the relocaddr on ARM as it does
on PPC.

Update the debugging instructions for arm relocation to
reflect this fact rather than requiring that the user
rebuild the u-boot image using -DDEBUG.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Wolfgang Denk <wd@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>

cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Acked-by: Detlev Zundel <dzu@denx.de>

- remove from boards.cfg
- add to doc/README.scrapyard

Signed-off-by: Eric Bénard <eric@eukrea.com>

Now that we have the documentation, the code should be changed to reflect
it ;)

Asd far as I can see, these are the places where HW_WATCHDOG is used
instead of WATCHDOG:

arch/blackfin/cpu/blackfin/watchdog.c
arch/m68k/cpu/mcf547x_8x/cpu.c

The relevant maintainers are on CC.

Signed-off-by: Detlev Zundel <dzu@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: TsiChungLiew <Tsi-Chung.Liew@freescale.com>

Support registers definitions of ftsdmc021 SDRAM controller.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

ftahbc020s.h provides basic definitions of this controller
to help a SoC which use this AHB Controller could
do scalable software settings in lowlevel_init.S.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

Noticed while building all of mpc8xx. Also
constify usage string in timer.c
Warnings fixed are:
timer.c: In function 'timer':
timer.c:189: warning: format not a string literal and no format arguments
timer.c:258: warning: format not a string literal and no format arguments
atm.c: In function 'atmUnload':
atm.c:99: warning: array subscript is above array bounds
atm.c: In function 'atmLoad':
atm.c:65: warning: array subscript is above array bounds
codec.c: In function 'codsp_write_pop_int':
codec.c:678: warning: array subscript is above array bounds
codec.c: In function 'codsp_write_cop_short':
codec.c:585: warning: array subscript is above array bounds
codec.c: In function 'codsp_write_sop_int':
codec.c:512: warning: array subscript is above array bounds

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

commit 25ddd1fb left remnants of
many comments about CONFIG_SYS_GBL_DATA_SIZE.

Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>

This patch adds support for the National LM64 temperature
sensor with integrated fan control to lm63.c.
Main difference between LM63 and LM64 is 16°C offset in sensor
readings.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>

- don't include config.h when building with host cc,
- HOSTCFLAGS was defined with the wrong name, so wasn't used,
- make sure make finds sources outside of tools/.

Signed-off-by: Franois Revol <revol@free.fr>

Fix return values for initialize/init/recv/send functions

Signed-off-by: Michal Simek <monstr@monstr.eu>

GNU Makefile have two flavors of variables, recursively expanded that is
defined by using '=', and simply expanded that is defined by using ':='.

The bug is caused by using recursively expanded flavor for BIN and SREC.
As you can see below, they are prepended by $(obj) twice.

We can reproduce this bug with a simplified version of this Makefile:
$ cat >Makefile <<\EOF
obj := /path/to/obj/
ELF := hello_world

BIN_rec = $(addsuffix .bin,$(ELF))      # recursively expanded
BIN_sim := $(addsuffix .bin,$(ELF))     # simply expanded

ELF := $(addprefix $(obj),$(ELF))
BIN_rec := $(addprefix $(obj),$(BIN_rec))
BIN_sim := $(addprefix $(obj),$(BIN_sim))

show:
	@echo BIN_rec=$(BIN_rec)
	@echo BIN_sim=$(BIN_sim)

.PHONY: show
EOF
$ make show
BIN_rec=/path/to/obj//path/to/obj/hello_world.bin
BIN_sim=/path/to/obj/hello_world.bin

Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>

This removes the following checkpatch issue:
 - ERROR: do not use assignment in if condition

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>

This removes the following checkpatch issues:
 - ERROR: switch and case should be at the same indent
 - WARNING: suspect code indent for conditional statements
 - WARNING: labels should not be indented

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>

This removes the following checkpatch issue:
 - ERROR: return is not a function, parentheses are not required

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>

This removes the following checkpatch issues:
 - ERROR: "foo * bar" should be "foo *bar"
 - ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>

This removes the following checkpatch issues:
 - WARNING: braces {} are not necessary for single statement blocks
 - WARNING: braces {} are not necessary for any arm of this statement

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>

This removes the following checkpatch issues:
 - ERROR: space prohibited after that open parenthesis '('
 - ERROR: space prohibited before that close parenthesis ')'
 - ERROR: space prohibited after that open square bracket '['
 - ERROR: space prohibited after that '&' (ctx:WxW)
 - ERROR: spaces required around that '=' (ctx:VxW)
 - ERROR: space required before the open parenthesis '('
 - ERROR: space required after that ',' (ctx:VxV)
 - ERROR: need consistent spacing around '+' (ctx:WxV)
 - WARNING: unnecessary whitespace before a quoted newline
 - WARNING: please, no spaces at the start of a line
 - WARNING: space prohibited between function name and open
   parenthesis '('

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>

This removes the following checkpatch errors:
 - ERROR: do not initialise globals to 0 or NULL
 - ERROR: spaces required around that '=' (ctx:VxV)
 - ERROR: that open brace { should be on the previous line

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>

This removes the following checkpatch warning:
 - WARNING: line over 80 characters

There are three such warnings left.

The first is hard to fix with cosmetic-only changes without compromising code
readability, so I'm leaving it as it is for now:
  WARNING: line over 80 characters
  #1537: FILE: net.c:1537:
  + [4 tabs] memcpy(((Ethernet_t *)NetArpWaitTxPacket)->et_dest, ...

The other two cannot be fixed without splitting string literals, so it is
preferred to keep them longer than 80 characters.

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>

as checkpatch proposes to use strict_strtoul instead of
simple_strtoul, introduce it.

Ported this function from Linux 2.6.38 commit ID:
521cb40b0c44418a4fd36dc633f575813d59a43d

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>

A large number of boards incorrectly used getenv() in their board init
code running before relocation.  In some cases this caused U-Boot to
hang when certain environment variables grew too long.
Fix the code to use getenv_r().

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: The LEOX team <team@leox.org>
Cc: Michael Schwingen <michael@schwingen.org>
Cc: Georg Schardt <schardt@team-ctech.de>
Cc: Werner Pfister <Pfister_Werner@intercontrol.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Peter De Schrijver <p2@mind.be>
Cc: John Zhan <zhanz@sinovee.com>
Cc: Rishi Bhattacharya <rishi@ti.com>
Cc: Peter Tyser <ptyser@xes-inc.com>

When calling getenv_f() with a too small buffer, it would print an
error message like this:

	env_buf too small [32]

This is not really helpful as it does not give any indication which of
the calls might have failed.  Change this into:

	env_buf [32 bytes] too small for value of "hwconfig"

so we know at least which variable caused the overflow; this usually
allows to quickly find the related code as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>

This is needed for the upcoming TFTP server implementation.

This also simplifies PingHandler() and fixes rxhand_f documentation.

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

Commit 9d8fbd1b "powerpc, 8xx: Fixup all 8xx u-boot.lds scripts" broke
building of the MPC8260 based "hymod" board.  Fix this.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Murray Jensen <Murray.Jensen@csiro.au>
Cc: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

The previous commit imported a little too much from upstream.  We need
to disable stdio.h when using U-Boot.

Reported-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Netconsole use the environment variable `ncip' to configure the
destination IP. `serverip' don't need to be defined.

Signed-off-by: Simon Guinot <sguinot@lacie.com>