pcm051: Enable DDR PHY dynamic power down bit

This is done already for am335x in
59dcf970 and also applies for pcm051.

It powers down the IO receiver when not performing read which helps
reducing the overall power consuption in low power states
(suspend/standby).

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>

board/phytec/pcm051/board.c

@@ -104,7 +104,8 @@ static struct emif_regs ddr3_emif_reg_data = {
 	.sdram_tim2 = MT41J256M8HX15E_EMIF_TIM2,
 	.sdram_tim3 = MT41J256M8HX15E_EMIF_TIM3,
 	.zq_config = MT41J256M8HX15E_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY,
+	.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
 };
 #endif