dts: rk3399: add dwc3_typec node for rk3399

rk3399 has two dwc3 controller for type-C port, add the dts node
and enable them.

Signed-off-by: MengDongyang <daniel.meng@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>

arch/arm/dts/rk3399-evb.dts

@@ -85,6 +85,10 @@
 	status = "okay";
 };
 
+&dwc3_typec0 {
+	status = "okay";
+};
+
 &usb_host1_ehci {
 	status = "okay";
 };
@@ -93,6 +97,10 @@
 	status = "okay";
 };
 
+&dwc3_typec1 {
+	status = "okay";
+};
+
 &pinctrl {
 	pmic {
 		pmic_int_l: pmic-int-l {

arch/arm/dts/rk3399.dtsi

@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#define USB_CLASS_HUB			9
 
 / {
 	compatible = "rockchip,rk3399";
@@ -230,6 +231,50 @@
 		status = "disabled";
 	};
 
+	dwc3_typec0: usb@fe800000 {
+		compatible = "rockchip,rk3399-xhci";
+		reg = <0x0 0xfe800000 0x0 0x100000>;
+		status = "disabled";
+		rockchip,vbus-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		snps,dis-enblslpm-quirk;
+		snps,phyif-utmi-bits = <16>;
+		snps,dis-u2-freeclk-exists-quirk;
+		snps,dis-u2-susphy-quirk;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		hub {
+			compatible = "usb-hub";
+			usb,device-class = <USB_CLASS_HUB>;
+		};
+		typec_phy0 {
+			compatible = "rockchip,rk3399-usb3-phy";
+			reg = <0x0 0xff7c0000 0x0 0x40000>;
+		};
+	};
+
+	dwc3_typec1: usb@fe900000 {
+		compatible = "rockchip,rk3399-xhci";
+		reg = <0x0 0xfe900000 0x0 0x100000>;
+		status = "disabled";
+		rockchip,vbus-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		snps,dis-enblslpm-quirk;
+		snps,phyif-utmi-bits = <16>;
+		snps,dis-u2-freeclk-exists-quirk;
+		snps,dis-u2-susphy-quirk;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		hub {
+			compatible = "usb-hub";
+			usb,device-class = <USB_CLASS_HUB>;
+		};
+		typec_phy1 {
+			compatible = "rockchip,rk3399-usb3-phy";
+			reg = <0x0 0xff800000 0x0 0x40000>;
+		};
+	};
+
 	gic: interrupt-controller@fee00000 {
 		compatible = "arm,gic-v3";
 		#interrupt-cells = <3>;