Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
from the bootp server

Signed-off-by: Wilson Callan <wcallan@savantav.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Ben Warren <bwarren@qstreams.com>

Merge git://www.denx.de/git/u-boot

Conflicts:

	drivers/bcm570x.c
	drivers/tigon3.c

Signed-off-by: Wolfgang Denk <wd@denx.de>

Conflicts:

	MAKEALL

With any luck, this is the last MAKEALL merge conflict!

PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
adapter.

Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Signde-off-by: Jon Loeliger <jdl@freescale.com>

Calculate the data timeout based on values from the CSD instead of
just using a hardcoded DTOR value. This is a backport of a similar fix
in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
instead of down.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

include/asm-avr32/div64.h was recently moved to include/div64.h, but
cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
the patch was merged perhaps?)

This patch updates cpu/at32ap/interrupts.c so that the avr32 port
compiles again.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Instead of always using the largest blocksize the card supports, check
if it can support smaller block sizes and use 512 bytes if possible.
Most cards do support this, and other parts of u-boot seem to have
trouble with block sizes different from 512 bytes.

Also enable underrun/overrun protection.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>

Also update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk

The update procedure was modified to turn off the USB subsystem
before exit for MCC200 and TRAB. This is necessary as otherwise the
USB controller continues to write periodically to system memory!

MCC200-specific notes:
- the patch disables the magic key check for MCC200
- the patch contains the configuration changes made
  for the new revision of the board.

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
area.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

The last fdt patch to bootm did board setup based on the address
specified by a prior fdt address command invocation.  The bootm
code, as its call to fdt_chosen does, should use the fdt specified
by the user on the bootm command.  Note this restores full
functionality for the 8360's existing default boot environment
values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
before booting a kernel).

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

In the patch titled "Create new fdt boardsetup command..." I removed the
call to ft_board_setup() from the routine fdt_chosen(), but I forgot
to add a direct call back into cmd_bootm.c

This fixes the oversight by adding the direct call to the bootm command.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Previously ft_board_setup() was called by fdt_chosen() which was not
really correctly structured.  This splits ft_board_setup() out by creating
a new fdt boardsetup command.

Fix a bug when parsing fdt set command values which have the square
bracket form [00 11 22 33] - the length was updated incorrectly in when
parsing that form.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Tighten up the error messages, split overlength lines.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

The fdt_chosen() function was adding/seting some properties ad-hoc
  improperly and duplicated (poorly) what was done in ft_board_setup()

Clean up long lines (setting properties, printing errors).

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Also removes the special case root path detection in cmd_fdt.c since it
is no longer necessary.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>

The new name matches more closely the kernel's name, which is also
a much better description.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>

Break lines that were greater than 80 characters in length.
Move the fdt print and property parsing code to separate static functions
  to reduce coding clutter in the fdt_cmd handling body.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Fix "fdt set" so that it will create a non-existing property.
Add "fdt mknode" to create nodes.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Do *NOT* return after the "point of no return" has been passed.
  If something goes wrong, the board must be reset after that point.
Move the "Transferring control to Linux" debug message back to where it
  belongs: just before transferring control to linux.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Stupid coding mistakes (identified by Timur Tabi, thanks).

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Make the length parameter optional: if not specified, do the move using
the current size unchanged.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Declare the variable fdt properly as extern.
Call the "set_fn" function pointer the "short way" without the full
  dereferencing syntax.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

Print more than the raw libfdt error message strings.  This is especially
useful for cluing in the user when the bootm command aborts due to
blob problems.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

This is the way u-boot reduces configured-out code.  At Wolfgang
Grandegger and Wolfgang Denk's request, make libfdt conform.

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>