Rather than have the board code initialize SATA automatically during boot,
make the user manually run "sata init".  This brings the SATA subsystem in
line with common U-Boot policy.

Rather than having a dedicated weak function "is_sata_supported", people
can override sata_initialize() to do their weird board stuff.  Then they
can call the actual __sata_initialize().

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

- It is possible to miss flush/invalidate the last
  cache line, we fix it at here.
- add the volatile and memory clobber.

They are pointed by Scott Wood.

Signed-off-by: Dave Liu <daveliu@freescale.com>

Doing trap_init immediately once we're running from RAM
means we're no longer dependent on the physical location of
the flash on non-BookE platforms. Before trap_init, those
platforms switch to real mode and go to 0xfff00100 on exception.
After the switch, they go to 0x00000100  This makes it easier to
move the flash location.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Add the ability to break the steps of the bootm command into several
subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.

This allows us to do things like manipulate device trees before
they are passed to a booting kernel or setup memory for a secondary
core in multicore situations.

Not all OS types support all subcommands (currently only start, loados,
ramdisk, fdt, and go are supported).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Each architecture has different ways of determine what regions of memory
might not be valid to get overwritten when we boot.  This provides a
hook to allow them to reserve any regions they care about.  Currently
only ppc, m68k and sparc need/use this.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
Six eth interface is chosen because the platform I am using combines
UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.

Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Fix compiler warning introduced by commit 0f8cbc18

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>

SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
driver still try to access the SATA registers, the cpu will hangup.
This patch try to fix this by reading the serdes status before the SATA
initialize.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>

Set force parameter in fdt_chosen() call in do_bootm_linux() call.
Without this, the chosen node is not overwritten if it already
exists.

Signed-off-by: Stefan Roese <sr@denx.de>

Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
and this stopped Linux from booting with a Ramdisk. This patch fixes
this, by deleting the useless dummy mem reservation.

When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
added to of_size, so we dont need anymore a dummy mem reservation.

I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
system (=0x44 bytes) and rounded it up to 0x80).

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
start in commit ad8f8687

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This allows to use show_activity() without having to
define an empty board_show_activity() function.

Signed-off-by: Wolfgang Denk <wd@denx.de>

There is no need for each OS specific function to call do_reset() we
can just do it once in bootm. This means its feasible on an error for
the OS boot function to return.

Also, remove passing in cmd_tbl_t as its not needed by the OS boot
functions.  flag isn't currently used but might be in the future so
we left it alone.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Created a new fdt_initrd() to deal with setting the initrd properties
in the device tree and fixing up the mem reserve.  We can use this
both in the choosen node handling and lets us remove some duplicated
code when we fixup the initrd info in bootm on PPC.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Move the fdt resizing code out of ppc specific boot code and into
common fdt support code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

To allow for persistent state between future bootm subcommands we
need the lmb to exist in a global state.
Moving it into the bootm_headers_t allows us to do that.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Move the code that handles finding a device tree blob and relocating
it (if needed) into common code so all arch's have access to it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Move determing if we have a ramdisk and where its located into the
common code. Keep track of the ramdisk start and end in the
bootm_headers_t image struct.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Move entry point code out of each arch and into common code.
Keep the entry point in the bootm_headers_t images struct.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

ARM, i386, m68k and ppc all have identical implementations of strmhz().
Other architectures don't provide this function at all.

This patch moves strmhz() into lib_generic, reducing code duplication
and providing a more unified API across architectures.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

The ePAPR spec has some subtle differences from the current device
tree based boot interface to the powerpc linux kernel. The powerpc
linux kernel currently ignores the differences that ePAPR specifies.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Note that with older board revisions, NAND boot may only work after a
power-on reset, and not after a warm reset.  I don't have a newer board
to test on; if you have a board with a 33MHz crystal, please let me know
if it works after a warm reset.

Signed-off-by: Scott Wood <scottwood@freescale.com>

The autostart revert caused a bit of duplicated code as well as
code that was using images->autostart that needs to get removed so
we can build again.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Perform sync/isync as required by the architecture.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

The LMB code now uses phys_addr_t and phys_size_t.  Also, there were a couple
of casting problems in the bootm code that called the LMB functions.

Signed-off-by: Andy Fleming <afleming@freescale.com>

gcc-4.3.x generates the following:

bootm.c: In function 'do_bootm_linux':
bootm.c:208: warning: cast from pointer to integer of different size
bootm.c:215: warning: cast from pointer to integer of different size

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

The compiler will help find mismatches between printf formats and
arguments if you let it.  This patch adds the necessary attributes to
declarations in include/common.h, then begins to correct the resulting
compiler warnings.  Some of these were bugs, e.g., "$d" instead of
"%d" and incorrect arguments.  Others were just annoying, like
int-long mismatches on a system where both are 32 bits.  It's worth
fixing the annoying errors to catch the real ones.

Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>

This change helps with better handling with others
Xilinx based platform.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>