All platforms have been moved to distro boot that's why remove the rest of
configurations to have unified boot flow.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Follow conventions and used {} around variables.

Fixes: 90e97ab3 ("arm: zynq: Define distro boot commnads for qspi, nand and nor")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

There are two typos in this command that's why it couldn't work properly.
This bootmode is almost unused from the beggining on this SoC.

Fixes: 90e97ab3 ("arm: zynq: Define distro boot commnads for qspi, nand and nor")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Xilinx Zynq SoC has two usb controllers and both could be used as secondary
boot method.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Xilinx Zynq SoC has two sdhci controllers but boot is only possible from
the first one. That's why there is a need to specify controller number.
mmc1 is supposed to be secondary boot device and should be also listed in
distribution boot.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch define init routine for generic phy driver and registers it
using phy_register as this generic phy driver also needs to be relocated
incase of manual reloc.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch added alias for usb node in dts file.

Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Use model property to distinguish different configurations.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add zu48dr and zu49dr to the list of zynqmp devices. The zu48dr and zu49dr
are the new RFSoC silicons with id values of 0x7b and 0x7e.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch reduces the console buffer size from 2048 to 1024, thus fixes
OCM overwriting issue.

Differences are in bss section as is shown from output:
xilinx_versal_mini: all -2056 bss -2048 text -8
   u-boot: add: 0/0, grow: 0/-3 bytes: 0/-2056 (-2056)
     function                                   old     new   delta
     cli_simple_run_command                     340     332      -8
     static.lastcommand                        2049    1025   -1024
     console_buffer                            2049    1025   -1024

Better would be to use PPU RAM but this change is also aligned with changes
done in ZynqMP mini configurations.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ZynqMP and Versal is using 2k that's why aligned all platform together to
be able to use the same scripts.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Increase init ram size by 4K such that more stack space will be available
during initialization as the present stackspace is not sufficient if DEBUG
option is enabled and causes system hang. Increasing init ram size provides
sufficient stack space during init even if DEBUG enabled and solves the
hang issue.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This option is disable in Xilinx tree for quite a long time that's why
let's disable it in mainline. If there is anybody who requires this options
then it should be moved to Kconfig first and should be removed from this
config.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

No reason to define new_buf again.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch moves CONFIG_ZYNQ_HISPD_BROKEN to Kconfig

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch removes check for Versal platform
in gem driver as it now supports clock setting
through clock framework.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds clock driver support for Versal platform. The clock driver
queries and performs clock operations using PLM firmware by communicating
with it using SMC calls.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds new versal compatible string to GEM driver for Versal
platform.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

GD is not used anywhere that's why there is no reason to have this macro
in the driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds new jtag distro boot command to look for bootscript file in
DDR and execute it first incase of jtag bootmode.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch updates scriptaddr value to 512MB as having it at 32MB has high
chance of script corruption incase of bigger kernel.

Be aware that 512MB is used for SPL malloc area that's why images should be
loaded after SPL (the best after u-boot relocation).

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

With the current boot script offset address in qspi is being overlaped
by BOOT.BIN as it is over 90MB with fpga included. So moving the script
offset address to end of flash after "bootenv" mtd partition. Here we
are considering qspi flash size >= 128Mbytes on versal and left
512Kbytes space to save boot.scr script.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds new dfu usb distro boot command to look for bootscript
from dfu-util and runs it.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>

This patch adds new jtag distro boot command to look for bootscript file
in DDR and execute it first incase of jtag bootmode.
This patch also updates scriptaddr to 512MB as there is high of script
corruption incase of bigger kernel image.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch defines macros required for DFU functionality
for Xilinx Versal platform.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add simple ZynqMP firmware drive to populate child nodes under
zynqmp_firmware DT node.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch provides an option to enable/disable OCM and TCM memory into MMU
table with corresponding memory attributes.

The same change was done for ZynqMP by commit 189bec47
("arm64: zynqmp: Provide a Kconfig option to define OCM and TCM in MMU")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Code reads DT and setup MMU table based on memory node. This will ensure
that only DT needs to be changed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch is setting up the initrd_high to as high as possible by leaving
max stack size for u-boot so that bigger rootfs can also be loaded by
u-boot for booting kernel.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch is setting up the initrd_high to as high as possible by leaving
max stack size for u-boot so that bigger rootfs can also be loaded by
u-boot for booting kernel.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds PL bitstream load support for Versal platform. The PL
bitstream is loaded by making an SMC to ATF which in turn communicates
with platform firmware which configures and loads PL bitstream on to PL.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Just to make sure that also drivers with versal name are assigned to proper
fragment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Define board_late_init which performs bootmode detection
and prepares corresponding distro boot commaand sequence.

Also disable it for mini platforms because simply there is no need to have
it enabled.
But also disable it for virtual platform because Qemu is not modelling this
register space that's why travis testing would fail. This configuration
should be reverted when mainline Qemu is updated.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

It is enabling this mode but full boot is not validated yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This node is used by qspi driver for supporting qspi boot mode in SPL.

Similar changes have beeen done by commit a9022b01
("ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Gpio hogs are used for GT mux setup after power up.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds sdboot command script for reference.
This can be converetd into uboot script using mkimage and
use for booting.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Thsi patch adds qspiboot command script for reference.
This can be converetd into uboot script using mkimage and
use for booting.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Define default address via Kconfig. There is no need to change this address
for most of the boards but it is also possible. This one line save a lot of
lines in defconfigs that's why make sense to do it.

The similar change has been done by commit 9340d8fe
("sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>

Signed-off-by: Tom Rini <trini@konsulko.com>