Build tools like Make, gcc or binutils support localized output
or unicode encoded output dependent on the default system locale.
This is not useful for buildman, where we want reproducible
warning or error messages or where the output of binutils is
further processed.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

Add instructions for chromebook_jerry.

Signed-off-by: Simon Glass <sjg@chromium.org>

The display on jerry is so fast that this option is not needed. Drop it so
that the display scrolls more smoothly.

Signed-off-by: Simon Glass <sjg@chromium.org>

Show the U-Boot banner and board information on the video display during
boot.

Signed-off-by: Simon Glass <sjg@chromium.org>

If U-Boot is chain-loaded from a previous boot loader we must set up the
clocks the way U-Boot wants them. Add code for this. It will do nothing if
SPL has already done the job.

Signed-off-by: Simon Glass <sjg@chromium.org>

Detect with a previous boot loader has already set up the clocks and set
them up again so that U-Boot gets what it expects.

Signed-off-by: Simon Glass <sjg@chromium.org>

Shifted masks are the standard approach with rockchip since it allows
use of the mask without shifting it each time. Update the definitions and
the driver to match.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add a sample .its file for booting U-Boot on a jerry Chromebook.

Signed-off-by: Simon Glass <sjg@chromium.org>

On reset the standby bit is clear, but if U-Boot is chain-loaded from
another boot loader it may be set. Clear it before starting up video so
that it works correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Squashed in 'rockchip: video: fix taking the VOP device out of standby':
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

Add remove() methods for EDP and VOP so that U-Boot can shut down the
video on exit. This avoids leaving DMA running while booting Linux which
can cause problems if Linux uses the frame buffer for something else.

It also makes it clear what is needed to shut down video.

While we are here, make rkvop_enable() static.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Squashed in 'rockchip: video: fix taking the VOP device out of standby':
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

Add a debug() statement so we can see when something goes wrong with the
regulator.

Signed-off-by: Simon Glass <sjg@chromium.org>

This typo doesn't actually cause any problems, but is wrong. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present if the

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 874ee59a (rockchip: pwm: implement pwm_set_invert())

Most Chromebooks support chain-loading U-Boot but instructions are
somewhat scattered. Add a README to hold this information within the
U-Boot tree. Also add the standard developer keys to simplify the
instructions, since they are small.

For now this only supports nyan-big.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add a sample .its file for booting U-Boot on a nyan-big Chromebook.

Signed-off-by: Simon Glass <sjg@chromium.org>

The clock fix-up for tegra is still present in the code. It causes a
divide-by-zero bug after relocation when chain-loading U-Boot from
coreboot. Fix this by adding a check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 74686766 (ARM: tegra: fix clock_get_periph_rate() for UART clocks)

At present CP15 init is disabled on tegra. Use the correct option so that
this init is performed on boot. This enables the instruction cache, for
example, which is critical to the machine running at full speed.

Signed-off-by: Simon Glass <sjg@chromium.org>

If U-Boot is the secondary boot loader, or has been run from itself, the
SOR may already be powered up. Powering it up again causes a hang, so
detect this situation and skip it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>

Enable this so we can roughly measure CPU performance. Also enable the
cache command to allow for timing.

Signed-off-by: Simon Glass <sjg@chromium.org>

For devices that need a delay between SPI transactions we seem to need an
additional delay before the first one if the CPU is running at full speed.
Add this, under control of the existing setting. At present it will only
be enabled with the Chrome OS EC.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present the interrupt does not work and the SPI bus runs much less
quickly than it should. Add settings to fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present early clock init happens in SPL. If SPL did not run (because
for example U-Boot is chain-loaded from another boot loader) then the
clocks are not set as U-Boot expects.

Add a function to detect this and call the early clock init in U-Boot
proper.

Signed-off-by: Simon Glass <sjg@chromium.org>

This file does not report a few possible errors and one message is missing
a newline. Fix these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

If CONFIG_ARMV7_LPAE is not defined we should make sure that the feature
is disabled. This can happen if U-Boot is chain-loaded from another boot
loader which does enable LPAE.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present if CONFIG_ARMV7_LPAE is defined then mmu_setup() will use
instructions which are invalid on ARMv4T. This happens on Tegra since it
has an ARMv4T boot CPU. Add a check for the architecture version to allow
the code to be built. It will not actually be executed by the boot CPU,
but needs to compile.

Signed-off-by: Simon Glass <sjg@chromium.org>

This appears to be a typo. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>

This option allows skipping the call to lowlevel() while still performing
CP15 init. Support this on ARM720T so it can be used with Tegra.

Signed-off-by: Simon Glass <sjg@chromium.org>

The existing test (patman --test) only covers basic checkpatch output.
We have had some problems with unicode processing and could use test
coverage for the various tags patman supports.

Add a new functional test which runs most of the patman flow on a few
test commits and checks that the results are correct.

See the documentation in the test for a description of what it does.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

This is not a good variable name in Python because 'list' is a type. It
shows up highlighted in some editors. Rename it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

Allow the add_maintainers parameter to be a list of maintainers, thus
allowing us to simulate calling the script in tests without actually
needing it to work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

Add some unicode to the test patches to make sure that patman does the
right thing.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

There is no need for this function to return the same object that was
passed in. Drop the return value.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

Unicode characters may appear in input patches so we should not warn about
them. Drop this warning.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

This is not a good variable name in Python because 'str' is a type. It
shows up highlighted in some editors. Rename it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

The communication filter reads data in blocks and converts each block to
unicode (if necessary) one at a time. In the unlikely event that a unicode
character in the input spans a block this will not work. We get an error
like:

UnicodeDecodeError: 'utf8' codec can't decode bytes in position 1022-1023:
   unexpected end of data

There is no need to change the input to unicode, so the easiest fix is to
drop this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

Don't mess with the email address when outputting them. Just make sure
they are encoded with utf-8.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

This change encodes the CC list to UTF-8 to avoid failures on
maintainer-addresses that include non-ASCII characters (observed on
Debian 7.11 with Python 2.7.3).

Without this, I get the following failure:
  Traceback (most recent call last):
    File "tools/patman/patman", line 159, in <module>
      options.add_maintainers)
    File "[snip]/u-boot/tools/patman/series.py", line 234, in MakeCcFile
      print(commit.patch, ', '.join(set(list)), file=fd)
  UnicodeEncodeError: 'ascii' codec can't encode character u'\xfc' in position 81: ordinal not in range(128)
from Heiko's email address:
  [..., u'"Heiko St\xfcbner" <heiko@sntech.de>', ...]

While with this change added this encodes to:
  "=?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>"

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

In the case where a new build only decreases sizes and does not increase
any size we still want to report what functions have been dropped when
doing a bloat comparison.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

In os_dirent_get_typename() we are checking that type falls within the
known values of the enum os_dirent_t.  With clang-3.8 testing this value
as being >= 0 results in a warning as it will always be true.  This
assumes of course that we are only given valid data.  Given that we want
to sanity check the input, we change this to check that it falls within
the range of the first to the last entry in the given enum.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Here is additional rk3368 and rk3399 support, rv1108 support,
refactoring HDMI video (brought in from Anatolij's tree to resolve
conflicts), some mkimage fixes and a few other things.